diff mbox series

[v2,3/7] drm: rockchip: vop: add rk3066 vop definitions

Message ID 20181229133318.18128-4-jbx6244@gmail.com (mailing list archive)
State New, archived
Headers show
Series Enable rk3066 VOP and HDMI for MK808 | expand

Commit Message

Johan Jonker Dec. 29, 2018, 1:33 p.m. UTC 
From: Mark Yao <mark.yao@rock-chips.com>

This patch adds the rk3066 VOP definitions.

The VOP or LCD Controller serves as interface between
framebuffer memory and a display device (LCD panel or TV set).

This SOC has two symmetrical LCDC's for a dual panel application.

A LCDC has 5 display layers.
Only 3 are used here.

- Video layer 0 (Win0)
- Video layer 1 (Win1)
- OSD layer     (Win2)

Win0 and Win1 are exchangeable.
Maximum resolution is 1920x1080.

The LCDC0 output is connected to:
- LCDC0 IO (without IOMUX)
- HDMI TX video input

The LCDC1 output is connected to:
- LCDC1 IO (with IOMUX)
- HDMI TX video input

The HDMI TX input can switch between LCDC0 and LCDC1.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 .../bindings/display/rockchip/rockchip-vop.txt     |   1 +
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c        | 110 +++++++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_vop_reg.h        |  53 ++++++++++
 3 files changed, 164 insertions(+)

Comments

Heiko Stübner Dec. 30, 2018, 5:22 p.m. UTC | #1 
Hi Johan,

Am Samstag, 29. Dezember 2018, 14:33:14 CET schrieb Johan Jonker:
> From: Mark Yao <mark.yao@rock-chips.com>
> 
> This patch adds the rk3066 VOP definitions.
> 
> The VOP or LCD Controller serves as interface between
> framebuffer memory and a display device (LCD panel or TV set).
> 
> This SOC has two symmetrical LCDC's for a dual panel application.
> 
> A LCDC has 5 display layers.
> Only 3 are used here.
> 
> - Video layer 0 (Win0)
> - Video layer 1 (Win1)
> - OSD layer     (Win2)

Patch itself looks good, we'll need to wait a bit to give Rob a chance
to look at the (simple) dt-binding change and I'll drop the paragraph
about the display layers when applying.

Looking at the rk3066-manual, the lcdcs really only have 3 fully usable
layers + the special cursor layer which is right now not really usable in
a drm context, so the above paragraph is misleading, so I'll just drop it.

Heiko


> Win0 and Win1 are exchangeable.
> Maximum resolution is 1920x1080.
> 
> The LCDC0 output is connected to:
> - LCDC0 IO (without IOMUX)
> - HDMI TX video input
> 
> The LCDC1 output is connected to:
> - LCDC1 IO (with IOMUX)
> - HDMI TX video input
> 
> The HDMI TX input can switch between LCDC0 and LCDC1.
> 
> Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Rob Herring (Arm) Jan. 11, 2019, 2:54 p.m. UTC | #2 
On Sun, Dec 30, 2018 at 06:22:00PM +0100, Heiko Stuebner wrote:
> Hi Johan,
> 
> Am Samstag, 29. Dezember 2018, 14:33:14 CET schrieb Johan Jonker:
> > From: Mark Yao <mark.yao@rock-chips.com>
> > 
> > This patch adds the rk3066 VOP definitions.
> > 
> > The VOP or LCD Controller serves as interface between
> > framebuffer memory and a display device (LCD panel or TV set).
> > 
> > This SOC has two symmetrical LCDC's for a dual panel application.
> > 
> > A LCDC has 5 display layers.
> > Only 3 are used here.
> > 
> > - Video layer 0 (Win0)
> > - Video layer 1 (Win1)
> > - OSD layer     (Win2)
> 
> Patch itself looks good, we'll need to wait a bit to give Rob a chance
> to look at the (simple) dt-binding change and I'll drop the paragraph
> about the display layers when applying.

Don't wait on me for simple oneline compatible additions.

Acked-by: Rob Herring <robh@kernel.org>

Rob
Heiko Stübner Jan. 12, 2019, 6:53 p.m. UTC | #3 
Am Freitag, 11. Januar 2019, 15:54:24 CET schrieb Rob Herring:
> On Sun, Dec 30, 2018 at 06:22:00PM +0100, Heiko Stuebner wrote:
> > Hi Johan,
> > 
> > Am Samstag, 29. Dezember 2018, 14:33:14 CET schrieb Johan Jonker:
> > > From: Mark Yao <mark.yao@rock-chips.com>
> > > 
> > > This patch adds the rk3066 VOP definitions.
> > > 
> > > The VOP or LCD Controller serves as interface between
> > > framebuffer memory and a display device (LCD panel or TV set).
> > > 
> > > This SOC has two symmetrical LCDC's for a dual panel application.
> > > 
> > > A LCDC has 5 display layers.
> > > Only 3 are used here.
> > > 
> > > - Video layer 0 (Win0)
> > > - Video layer 1 (Win1)
> > > - OSD layer     (Win2)
> > 
> > Patch itself looks good, we'll need to wait a bit to give Rob a chance
> > to look at the (simple) dt-binding change and I'll drop the paragraph
> > about the display layers when applying.
> 
> Don't wait on me for simple oneline compatible additions.

This more or less was the fault of the year change :-D ... most of
the time I'd apply a simple new compatible earlier and possibly
without Ack ;-) .

And I've applied the patch to drm-misc-next now (for 5.1).

Heiko
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
index b79e5769f..4f58c5a2d 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
@@ -10,6 +10,7 @@  Required properties:
 		"rockchip,rk3126-vop";
 		"rockchip,px30-vop-lit";
 		"rockchip,px30-vop-big";
+		"rockchip,rk3066-vop";
 		"rockchip,rk3188-vop";
 		"rockchip,rk3288-vop";
 		"rockchip,rk3368-vop";
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
index a6db3cd55..2799c7e8e 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
@@ -299,6 +299,114 @@  static const struct vop_data px30_vop_lit = {
 	.win_size = ARRAY_SIZE(px30_vop_lit_win_data),
 };
 
+static const struct vop_scl_regs rk3066_win_scl = {
+	.scale_yrgb_x = VOP_REG(RK3066_WIN0_SCL_FACTOR_YRGB, 0xffff, 0x0),
+	.scale_yrgb_y = VOP_REG(RK3066_WIN0_SCL_FACTOR_YRGB, 0xffff, 16),
+	.scale_cbcr_x = VOP_REG(RK3066_WIN0_SCL_FACTOR_CBR, 0xffff, 0x0),
+	.scale_cbcr_y = VOP_REG(RK3066_WIN0_SCL_FACTOR_CBR, 0xffff, 16),
+};
+
+static const struct vop_win_phy rk3066_win0_data = {
+	.scl = &rk3066_win_scl,
+	.data_formats = formats_win_full,
+	.nformats = ARRAY_SIZE(formats_win_full),
+	.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 0),
+	.format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 4),
+	.rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 19),
+	.act_info = VOP_REG(RK3066_WIN0_ACT_INFO, 0x1fff1fff, 0),
+	.dsp_info = VOP_REG(RK3066_WIN0_DSP_INFO, 0x0fff0fff, 0),
+	.dsp_st = VOP_REG(RK3066_WIN0_DSP_ST, 0x1fff1fff, 0),
+	.yrgb_mst = VOP_REG(RK3066_WIN0_YRGB_MST0, 0xffffffff, 0),
+	.uv_mst = VOP_REG(RK3066_WIN0_CBR_MST0, 0xffffffff, 0),
+	.yrgb_vir = VOP_REG(RK3066_WIN0_VIR, 0xffff, 0),
+	.uv_vir = VOP_REG(RK3066_WIN0_VIR, 0x1fff, 16),
+};
+
+static const struct vop_win_phy rk3066_win1_data = {
+	.scl = &rk3066_win_scl,
+	.data_formats = formats_win_full,
+	.nformats = ARRAY_SIZE(formats_win_full),
+	.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 1),
+	.format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 7),
+	.rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 23),
+	.act_info = VOP_REG(RK3066_WIN1_ACT_INFO, 0x1fff1fff, 0),
+	.dsp_info = VOP_REG(RK3066_WIN1_DSP_INFO, 0x0fff0fff, 0),
+	.dsp_st = VOP_REG(RK3066_WIN1_DSP_ST, 0x1fff1fff, 0),
+	.yrgb_mst = VOP_REG(RK3066_WIN1_YRGB_MST, 0xffffffff, 0),
+	.uv_mst = VOP_REG(RK3066_WIN1_CBR_MST, 0xffffffff, 0),
+	.yrgb_vir = VOP_REG(RK3066_WIN1_VIR, 0xffff, 0),
+	.uv_vir = VOP_REG(RK3066_WIN1_VIR, 0x1fff, 16),
+};
+
+static const struct vop_win_phy rk3066_win2_data = {
+	.data_formats = formats_win_lite,
+	.nformats = ARRAY_SIZE(formats_win_lite),
+	.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 2),
+	.format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 10),
+	.rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 27),
+	.dsp_info = VOP_REG(RK3066_WIN2_DSP_INFO, 0x0fff0fff, 0),
+	.dsp_st = VOP_REG(RK3066_WIN2_DSP_ST, 0x1fff1fff, 0),
+	.yrgb_mst = VOP_REG(RK3066_WIN2_MST, 0xffffffff, 0),
+	.yrgb_vir = VOP_REG(RK3066_WIN2_VIR, 0xffff, 0),
+};
+
+static const struct vop_modeset rk3066_modeset = {
+	.htotal_pw = VOP_REG(RK3066_DSP_HTOTAL_HS_END, 0x1fff1fff, 0),
+	.hact_st_end = VOP_REG(RK3066_DSP_HACT_ST_END, 0x1fff1fff, 0),
+	.vtotal_pw = VOP_REG(RK3066_DSP_VTOTAL_VS_END, 0x1fff1fff, 0),
+	.vact_st_end = VOP_REG(RK3066_DSP_VACT_ST_END, 0x1fff1fff, 0),
+};
+
+static const struct vop_output rk3066_output = {
+	.pin_pol = VOP_REG(RK3066_DSP_CTRL0, 0x7, 4),
+};
+
+static const struct vop_common rk3066_common = {
+	.standby = VOP_REG(RK3066_SYS_CTRL0, 0x1, 1),
+	.out_mode = VOP_REG(RK3066_DSP_CTRL0, 0xf, 0),
+	.cfg_done = VOP_REG(RK3066_REG_CFG_DONE, 0x1, 0),
+	.dsp_blank = VOP_REG(RK3066_DSP_CTRL1, 0x1, 24),
+};
+
+static const struct vop_win_data rk3066_vop_win_data[] = {
+	{ .base = 0x00, .phy = &rk3066_win0_data,
+	  .type = DRM_PLANE_TYPE_PRIMARY },
+	{ .base = 0x00, .phy = &rk3066_win1_data,
+	  .type = DRM_PLANE_TYPE_OVERLAY },
+	{ .base = 0x00, .phy = &rk3066_win2_data,
+	  .type = DRM_PLANE_TYPE_CURSOR },
+};
+
+static const int rk3066_vop_intrs[] = {
+	/*
+	 * hs_start interrupt fires at frame-start, so serves
+	 * the same purpose as dsp_hold in the driver.
+	 */
+	DSP_HOLD_VALID_INTR,
+	FS_INTR,
+	LINE_FLAG_INTR,
+	BUS_ERROR_INTR,
+};
+
+static const struct vop_intr rk3066_intr = {
+	.intrs = rk3066_vop_intrs,
+	.nintrs = ARRAY_SIZE(rk3066_vop_intrs),
+	.line_flag_num[0] = VOP_REG(RK3066_INT_STATUS, 0xfff, 12),
+	.status = VOP_REG(RK3066_INT_STATUS, 0xf, 0),
+	.enable = VOP_REG(RK3066_INT_STATUS, 0xf, 4),
+	.clear = VOP_REG(RK3066_INT_STATUS, 0xf, 8),
+};
+
+static const struct vop_data rk3066_vop = {
+	.version = VOP_VERSION(2, 1),
+	.intr = &rk3066_intr,
+	.common = &rk3066_common,
+	.modeset = &rk3066_modeset,
+	.output = &rk3066_output,
+	.win = rk3066_vop_win_data,
+	.win_size = ARRAY_SIZE(rk3066_vop_win_data),
+};
+
 static const struct vop_scl_regs rk3188_win_scl = {
 	.scale_yrgb_x = VOP_REG(RK3188_WIN0_SCL_FACTOR_YRGB, 0xffff, 0x0),
 	.scale_yrgb_y = VOP_REG(RK3188_WIN0_SCL_FACTOR_YRGB, 0xffff, 16),
@@ -754,6 +862,8 @@  static const struct of_device_id vop_driver_dt_match[] = {
 	  .data = &px30_vop_big },
 	{ .compatible = "rockchip,px30-vop-lit",
 	  .data = &px30_vop_lit },
+	{ .compatible = "rockchip,rk3066-vop",
+	  .data = &rk3066_vop },
 	{ .compatible = "rockchip,rk3188-vop",
 	  .data = &rk3188_vop },
 	{ .compatible = "rockchip,rk3288-vop",
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.h b/drivers/gpu/drm/rockchip/rockchip_vop_reg.h
index 7348c6835..d837d4a7d 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.h
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.h
@@ -983,4 +983,57 @@ 
 #define RK3188_REG_CFG_DONE		0x90
 /* rk3188 register definition end */
 
+/* rk3066 register definition */
+#define RK3066_SYS_CTRL0		0x00
+#define RK3066_SYS_CTRL1		0x04
+#define RK3066_DSP_CTRL0		0x08
+#define RK3066_DSP_CTRL1		0x0c
+#define RK3066_INT_STATUS		0x10
+#define RK3066_MCU_CTRL			0x14
+#define RK3066_BLEND_CTRL		0x18
+#define RK3066_WIN0_COLOR_KEY_CTRL	0x1c
+#define RK3066_WIN1_COLOR_KEY_CTRL	0x20
+#define RK3066_WIN2_COLOR_KEY_CTRL	0x24
+#define RK3066_WIN0_YRGB_MST0		0x28
+#define RK3066_WIN0_CBR_MST0		0x2c
+#define RK3066_WIN0_YRGB_MST1		0x30
+#define RK3066_WIN0_CBR_MST1		0x34
+#define RK3066_WIN0_VIR			0x38
+#define RK3066_WIN0_ACT_INFO		0x3c
+#define RK3066_WIN0_DSP_INFO		0x40
+#define RK3066_WIN0_DSP_ST		0x44
+#define RK3066_WIN0_SCL_FACTOR_YRGB	0x48
+#define RK3066_WIN0_SCL_FACTOR_CBR	0x4c
+#define RK3066_WIN0_SCL_OFFSET		0x50
+#define RK3066_WIN1_YRGB_MST		0x54
+#define RK3066_WIN1_CBR_MST		0x58
+#define RK3066_WIN1_VIR			0x5c
+#define RK3066_WIN1_ACT_INFO		0x60
+#define RK3066_WIN1_DSP_INFO		0x64
+#define RK3066_WIN1_DSP_ST		0x68
+#define RK3066_WIN1_SCL_FACTOR_YRGB	0x6c
+#define RK3066_WIN1_SCL_FACTOR_CBR	0x70
+#define RK3066_WIN1_SCL_OFFSET		0x74
+#define RK3066_WIN2_MST			0x78
+#define RK3066_WIN2_VIR			0x7c
+#define RK3066_WIN2_DSP_INFO		0x80
+#define RK3066_WIN2_DSP_ST		0x84
+#define RK3066_HWC_MST			0x88
+#define RK3066_HWC_DSP_ST		0x8c
+#define RK3066_HWC_COLOR_LUT0		0x90
+#define RK3066_HWC_COLOR_LUT1		0x94
+#define RK3066_HWC_COLOR_LUT2		0x98
+#define RK3066_DSP_HTOTAL_HS_END	0x9c
+#define RK3066_DSP_HACT_ST_END		0xa0
+#define RK3066_DSP_VTOTAL_VS_END	0xa4
+#define RK3066_DSP_VACT_ST_END		0xa8
+#define RK3066_DSP_VS_ST_END_F1		0xac
+#define RK3066_DSP_VACT_ST_END_F1	0xb0
+#define RK3066_REG_CFG_DONE		0xc0
+#define RK3066_MCU_BYPASS_WPORT		0x100
+#define RK3066_MCU_BYPASS_RPORT		0x200
+#define RK3066_WIN2_LUT_ADDR		0x400
+#define RK3066_DSP_LUT_ADDR		0x800
+/* rk3066 register definition end */
+
 #endif /* _ROCKCHIP_VOP_REG_H */