diff mbox series

[v4,2/2] i2c: imx: forward error values out of i2c_imx_dma_request()

Message ID 20190107084738.4130-3-o.rempel@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series i2c: imx: rework imx error handling. | expand

Commit Message

Oleksij Rempel Jan. 7, 2019, 8:47 a.m. UTC 
Make sure, i2c_imx_probe() well get and forward same error values as
i2c_imx_dma_request().

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/i2c/busses/i2c-imx.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

Comments

Uwe Kleine-König Jan. 7, 2019, 8:31 p.m. UTC | #1 
On Mon, Jan 07, 2019 at 09:47:38AM +0100, Oleksij Rempel wrote:
> Make sure, i2c_imx_probe() well get and forward same error values as
> i2c_imx_dma_request().

Maybe better: Improve the error handling in i2c_imx_dma_request() and
let it return an error indication that the caller then can handle
accordingly.

> -static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
> +static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
>  						dma_addr_t phy_addr)

This is a good opportunity to realign the continuation line to the
opening parenthesis.

Otherwise the patch looks good.

Best regards
Uwe
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index e28ef494dac8..487ccc2af999 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -273,7 +273,7 @@  static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
 }
 
 /* Functions for DMA support */
-static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
+static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
 						dma_addr_t phy_addr)
 {
 	struct imx_i2c_dma *dma;
@@ -283,7 +283,7 @@  static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
 
 	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
 	if (!dma)
-		return;
+		return -ENOMEM;
 
 	dma->chan_tx = dma_request_chan(dev, "tx");
 	if (IS_ERR(dma->chan_tx)) {
@@ -328,7 +328,7 @@  static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
 	dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n",
 		dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
 
-	return;
+	return 0;
 
 fail_rx:
 	dma_release_channel(dma->chan_rx);
@@ -336,6 +336,8 @@  static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
 	dma_release_channel(dma->chan_tx);
 fail_al:
 	devm_kfree(dev, dma);
+	/* return successfully if there is no dma support */
+	return ret == -ENODEV ? 0 : ret;
 }
 
 static void i2c_imx_dma_callback(void *arg)
@@ -1163,11 +1165,13 @@  static int i2c_imx_probe(struct platform_device *pdev)
 	dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res);
 	dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n",
 		i2c_imx->adapter.name);
-	dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
 
 	/* Init DMA config if supported */
-	i2c_imx_dma_request(i2c_imx, phy_addr);
+	ret = i2c_imx_dma_request(i2c_imx, phy_addr);
+	if (ret < 0)
+		goto clk_notifier_unregister;
 
+	dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
 	return 0;   /* Return OK */
 
 clk_notifier_unregister: