| Message ID | 20190110100533.33333-2-peng.ma@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] ahci: qoriq: add lx2160 platforms support | expand |
On Thu, Jan 10, 2019 at 06:05:33PM +0800, Peng Ma wrote: > Add sata node support and Enable sata support > > Signed-off-by: Peng Ma <peng.ma@nxp.com> > --- > arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ > arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++ > 2 files changed, 60 insertions(+), 0 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > index 6481e5f..aacca27 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > @@ -117,3 +117,19 @@ > &usb1 { > status = "okay"; > }; > + > +&sata0 { > + status = "okay"; > +}; > + > +&sata1 { > + status = "okay"; > +}; > + > +&sata2 { > + status = "okay"; > +}; > + > +&sata3 { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > index a79f5c1..e857a14 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > @@ -762,5 +762,49 @@ > <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; > dma-coherent; > }; > + > + sata0: sata@3200000 { > + status = "disabled"; We usually have 'status' at the end of property list. Shawn > + compatible = "fsl,lx2160a-ahci"; > + reg = <0x0 0x3200000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + }; > + > + sata1: sata@3210000 { > + status = "disabled"; > + compatible = "fsl,lx2160a-ahci"; > + reg = <0x0 0x3210000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + }; > + > + sata2: sata@3220000 { > + status = "disabled"; > + compatible = "fsl,lx2160a-ahci"; > + reg = <0x0 0x3220000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + }; > + > + sata3: sata@3230000 { > + status = "disabled"; > + compatible = "fsl,lx2160a-ahci"; > + reg = <0x0 0x3230000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + }; > }; > }; > -- > 1.7.1 >
>-----Original Message----- >From: Shawn Guo <shawnguo@kernel.org> >Sent: 2019年1月13日 12:06 >To: Peng Ma <peng.ma@nxp.com> >Cc: axboe@kernel.dk; Leo Li <leoyang.li@nxp.com>; robh+dt@kernel.org; >mark.rutland@arm.com; linux-arm-kernel@lists.infradead.org; >devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; >linux-ide@vger.kernel.org >Subject: Re: [PATCH 2/2] arm64: dts: lx2160a: add sata node support > >On Thu, Jan 10, 2019 at 06:05:33PM +0800, Peng Ma wrote: >> Add sata node support and Enable sata support >> >> Signed-off-by: Peng Ma <peng.ma@nxp.com> >> --- >> arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ >> arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 >+++++++++++++++++++++ >> 2 files changed, 60 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> index 6481e5f..aacca27 100644 >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> @@ -117,3 +117,19 @@ >> &usb1 { >> status = "okay"; >> }; >> + >> +&sata0 { >> + status = "okay"; >> +}; >> + >> +&sata1 { >> + status = "okay"; >> +}; >> + >> +&sata2 { >> + status = "okay"; >> +}; >> + >> +&sata3 { >> + status = "okay"; >> +}; >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> index a79f5c1..e857a14 100644 >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> @@ -762,5 +762,49 @@ >> <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; >> dma-coherent; >> }; >> + >> + sata0: sata@3200000 { >> + status = "disabled"; > >We usually have 'status' at the end of property list. > >Shawn [Peng Ma] Ok, got it, thanks yure quick reply. Regards, Peng > >> + compatible = "fsl,lx2160a-ahci"; >> + reg = <0x0 0x3200000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + }; >> + >> + sata1: sata@3210000 { >> + status = "disabled"; >> + compatible = "fsl,lx2160a-ahci"; >> + reg = <0x0 0x3210000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + }; >> + >> + sata2: sata@3220000 { >> + status = "disabled"; >> + compatible = "fsl,lx2160a-ahci"; >> + reg = <0x0 0x3220000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + }; >> + >> + sata3: sata@3230000 { >> + status = "disabled"; >> + compatible = "fsl,lx2160a-ahci"; >> + reg = <0x0 0x3230000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + }; >> }; >> }; >> -- >> 1.7.1 >>
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 6481e5f..aacca27 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -117,3 +117,19 @@ &usb1 { status = "okay"; }; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index a79f5c1..e857a14 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -762,5 +762,49 @@ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; }; + + sata0: sata@3200000 { + status = "disabled"; + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + }; + + sata1: sata@3210000 { + status = "disabled"; + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3210000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + }; + + sata2: sata@3220000 { + status = "disabled"; + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3220000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + }; + + sata3: sata@3230000 { + status = "disabled"; + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3230000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + }; }; };
Add sata node support and Enable sata support Signed-off-by: Peng Ma <peng.ma@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++ 2 files changed, 60 insertions(+), 0 deletions(-)