diff mbox series

[8/8] DO-NOT-MERGE: arm64: allwinner: a64: enable Bluetooth On SoPine baseboard

Message ID 20190118170232.16142-9-anarsoul@gmail.com (mailing list archive)
State New, archived
Headers show
Series Add support for rtl8723bs/rtl8723cs bluetooth | expand

Commit Message

Vasily Khoruzhick Jan. 18, 2019, 5:02 p.m. UTC
SoPine has optional RTL8723BS WiFi + BT module, BT is connected to UART1
and uses PL4 as BT reset, PL5 as device wake GPIO, PL6 as host wake GPIO
the I2C controlling signals are connected to R_I2C bus.

Enable it in the device tree.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
 .../dts/allwinner/sun50i-a64-sopine-baseboard.dts  | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index e6fb9683f213..691ffad390c6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -204,6 +204,20 @@ 
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		firmware-postfix = "pine64";
+	};
+};
+
 &usb_otg {
 	dr_mode = "host";
 	status = "okay";