@@ -38,12 +38,14 @@
#define AT803X_DEVICE_ADDR 0x03
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
+#define AT803X_SMARTEEE_CTL3_OFFSET 0x805D
#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
#define AT803X_MMD_ACCESS_CONTROL 0x0D
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
#define AT803X_FUNC_DATA 0x4003
#define AT803X_REG_CHIP_CONFIG 0x1f
#define AT803X_BT_BX_REG_SEL 0x8000
+#define AT803X_SMARTEEE_DISABLED_VAL 0x1000
#define AT803X_DEBUG_ADDR 0x1D
#define AT803X_DEBUG_DATA 0x1E
@@ -65,12 +67,15 @@
#define ATH8035_PHY_ID 0x004dd072
#define AT803X_PHY_ID_MASK 0xffffffef
+#define AT803X_SMARTEEE_FEATURE_DISABLE BIT(1)
+
MODULE_DESCRIPTION("Atheros 803x PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
MODULE_LICENSE("GPL");
struct at803x_priv {
bool phy_reset:1;
+ u32 quirks;
};
struct at803x_context {
@@ -210,6 +215,13 @@ static void at803x_get_wol(struct phy_device *phydev,
wol->wolopts |= WAKE_MAGIC;
}
+static int at803x_disable_smarteee(struct phy_device *phydev)
+{
+ return phy_write_mmd(phydev, AT803X_DEVICE_ADDR,
+ AT803X_SMARTEEE_CTL3_OFFSET,
+ AT803X_SMARTEEE_DISABLED_VAL);
+}
+
static int at803x_suspend(struct phy_device *phydev)
{
int value;
@@ -242,6 +254,9 @@ static int at803x_probe(struct phy_device *phydev)
if (!priv)
return -ENOMEM;
+ if (of_property_read_bool(dev->of_node, "at803x,smarteee-disabled"))
+ priv->quirks |= AT803X_SMARTEEE_FEATURE_DISABLE;
+
phydev->priv = priv;
return 0;
@@ -249,6 +264,7 @@ static int at803x_probe(struct phy_device *phydev)
static int at803x_config_init(struct phy_device *phydev)
{
+ struct at803x_priv *priv = phydev->priv;
int ret;
ret = genphy_config_init(phydev);
@@ -269,6 +285,12 @@ static int at803x_config_init(struct phy_device *phydev)
return ret;
}
+ if (priv->quirks & AT803X_SMARTEEE_FEATURE_DISABLE) {
+ ret = at803x_disable_smarteee(phydev);
+ if (ret < 0)
+ return ret;
+ }
+
return 0;
}
The proprietary SmartEEE mode makes the PHY entering a sleep mode after a configurable idle time. It does this without LPI signals coming from MAC. Since this is a configurable behavior and it is known to cause issues add a way to disable it using a custom quirk. Signed-off-by: Carlo Caione <ccaione@baylibre.com> --- drivers/net/phy/at803x.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)