diff mbox series

[v2,2/3] crypto: arm/crct10dif-ce - cleanup and optimizations

Message ID 20190129080029.22261-3-ebiggers@kernel.org (mailing list archive)
State New, archived
Headers show
Series crypto: crct10dif assembly cleanup and optimizations | expand

Commit Message

Eric Biggers Jan. 29, 2019, 8 a.m. UTC
From: Eric Biggers <ebiggers@google.com>

The x86, arm, and arm64 asm implementations of crct10dif are very
difficult to understand partly because many of the comments, labels, and
macros are named incorrectly: the lengths mentioned are usually off by a
factor of two from the actual code.  Many other things are unnecessarily
convoluted as well, e.g. there are many more fold constants than
actually needed and some aren't fully reduced.

This series therefore cleans up all these implementations to be much
more maintainable.  I also made some small optimizations where I saw
opportunities, resulting in slightly better performance.

This patch cleans up the arm version.

(Also moved the constants to .rodata as suggested by Ard Biesheuvel.)

Signed-off-by: Eric Biggers <ebiggers@google.com>
---
 arch/arm/crypto/crct10dif-ce-core.S | 554 +++++++++++++---------------
 arch/arm/crypto/crct10dif-ce-glue.c |   2 +-
 2 files changed, 263 insertions(+), 293 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/crypto/crct10dif-ce-core.S b/arch/arm/crypto/crct10dif-ce-core.S
index d058fad423c2f..f023a975fe0c4 100644
--- a/arch/arm/crypto/crct10dif-ce-core.S
+++ b/arch/arm/crypto/crct10dif-ce-core.S
@@ -2,12 +2,14 @@ 
 // Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions instructions
 //
 // Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
+// Copyright (C) 2019 Google LLC <ebiggers@google.com>
 //
 // This program is free software; you can redistribute it and/or modify
 // it under the terms of the GNU General Public License version 2 as
 // published by the Free Software Foundation.
 //
 
+// Derived from the x86 version:
 //
 // Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions
 //
@@ -54,19 +56,11 @@ 
 // NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 // SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 //
-//       Function API:
-//       UINT16 crc_t10dif_pcl(
-//               UINT16 init_crc, //initial CRC value, 16 bits
-//               const unsigned char *buf, //buffer pointer to calculate CRC on
-//               UINT64 len //buffer length in bytes (64-bit data)
-//       );
-//
 //       Reference paper titled "Fast CRC Computation for Generic
 //	Polynomials Using PCLMULQDQ Instruction"
 //       URL: http://www.intel.com/content/dam/www/public/us/en/documents
 //  /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
 //
-//
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
@@ -80,11 +74,11 @@ 
 	.text
 	.fpu		crypto-neon-fp-armv8
 
-	arg1_low32	.req	r0
-	arg2		.req	r1
-	arg3		.req	r2
+	init_crc	.req	r0
+	buf		.req	r1
+	len		.req	r2
 
-	qzr		.req	q13
+	fold_consts_ptr	.req	ip
 
 	q0l		.req	d0
 	q0h		.req	d1
@@ -102,82 +96,35 @@ 
 	q6h		.req	d13
 	q7l		.req	d14
 	q7h		.req	d15
-
-ENTRY(crc_t10dif_pmull)
-	vmov.i8		qzr, #0			// init zero register
-
-	// adjust the 16-bit initial_crc value, scale it to 32 bits
-	lsl		arg1_low32, arg1_low32, #16
-
-	// check if smaller than 256
-	cmp		arg3, #256
-
-	// for sizes less than 128, we can't fold 64B at a time...
-	blt		_less_than_128
-
-	// load the initial crc value
-	// crc value does not need to be byte-reflected, but it needs
-	// to be moved to the high part of the register.
-	// because data will be byte-reflected and will align with
-	// initial crc at correct place.
-	vmov		s0, arg1_low32		// initial crc
-	vext.8		q10, qzr, q0, #4
-
-	// receive the initial 64B data, xor the initial crc value
-	vld1.64		{q0-q1}, [arg2]!
-	vld1.64		{q2-q3}, [arg2]!
-	vld1.64		{q4-q5}, [arg2]!
-	vld1.64		{q6-q7}, [arg2]!
-CPU_LE(	vrev64.8	q0, q0			)
-CPU_LE(	vrev64.8	q1, q1			)
-CPU_LE(	vrev64.8	q2, q2			)
-CPU_LE(	vrev64.8	q3, q3			)
-CPU_LE(	vrev64.8	q4, q4			)
-CPU_LE(	vrev64.8	q5, q5			)
-CPU_LE(	vrev64.8	q6, q6			)
-CPU_LE(	vrev64.8	q7, q7			)
-
-	vswp		d0, d1
-	vswp		d2, d3
-	vswp		d4, d5
-	vswp		d6, d7
-	vswp		d8, d9
-	vswp		d10, d11
-	vswp		d12, d13
-	vswp		d14, d15
-
-	// XOR the initial_crc value
-	veor.8		q0, q0, q10
-
-	adr		ip, rk3
-	vld1.64		{q10}, [ip, :128]	// xmm10 has rk3 and rk4
-
-	//
-	// we subtract 256 instead of 128 to save one instruction from the loop
-	//
-	sub		arg3, arg3, #256
-
-	// at this section of the code, there is 64*x+y (0<=y<64) bytes of
-	// buffer. The _fold_64_B_loop will fold 64B at a time
-	// until we have 64+y Bytes of buffer
-
-
-	// fold 64B at a time. This section of the code folds 4 vector
-	// registers in parallel
-_fold_64_B_loop:
-
-	.macro		fold64, reg1, reg2
-	vld1.64		{q11-q12}, [arg2]!
-
-	vmull.p64	q8, \reg1\()h, d21
-	vmull.p64	\reg1, \reg1\()l, d20
-	vmull.p64	q9, \reg2\()h, d21
-	vmull.p64	\reg2, \reg2\()l, d20
-
-CPU_LE(	vrev64.8	q11, q11		)
-CPU_LE(	vrev64.8	q12, q12		)
-	vswp		d22, d23
-	vswp		d24, d25
+	q8l		.req	d16
+	q8h		.req	d17
+	q9l		.req	d18
+	q9h		.req	d19
+	q10l		.req	d20
+	q10h		.req	d21
+	q11l		.req	d22
+	q11h		.req	d23
+	q12l		.req	d24
+	q12h		.req	d25
+
+	FOLD_CONSTS	.req	q10
+	FOLD_CONST_L	.req	q10l
+	FOLD_CONST_H	.req	q10h
+
+	// Fold reg1, reg2 into the next 32 data bytes, storing the result back
+	// into reg1, reg2.
+	.macro		fold_32_bytes, reg1, reg2
+	vld1.64		{q11-q12}, [buf]!
+
+	vmull.p64	q8, \reg1\()h, FOLD_CONST_H
+	vmull.p64	\reg1, \reg1\()l, FOLD_CONST_L
+	vmull.p64	q9, \reg2\()h, FOLD_CONST_H
+	vmull.p64	\reg2, \reg2\()l, FOLD_CONST_L
+
+CPU_LE(	vrev64.8	q11, q11	)
+CPU_LE(	vrev64.8	q12, q12	)
+	vswp		q11l, q11h
+	vswp		q12l, q12h
 
 	veor.8		\reg1, \reg1, q8
 	veor.8		\reg2, \reg2, q9
@@ -185,229 +132,252 @@  CPU_LE(	vrev64.8	q12, q12		)
 	veor.8		\reg2, \reg2, q12
 	.endm
 
-	fold64		q0, q1
-	fold64		q2, q3
-	fold64		q4, q5
-	fold64		q6, q7
-
-	subs		arg3, arg3, #128
-
-	// check if there is another 64B in the buffer to be able to fold
-	bge		_fold_64_B_loop
-
-	// at this point, the buffer pointer is pointing at the last y Bytes
-	// of the buffer the 64B of folded data is in 4 of the vector
-	// registers: v0, v1, v2, v3
-
-	// fold the 8 vector registers to 1 vector register with different
-	// constants
-
-	adr		ip, rk9
-	vld1.64		{q10}, [ip, :128]!
+	// Fold src_reg into dst_reg, optionally loading the next fold constants
+	.macro		fold_16_bytes, src_reg, dst_reg, load_next_consts
+	vmull.p64	q8, \src_reg\()l, FOLD_CONST_L
+	vmull.p64	\src_reg, \src_reg\()h, FOLD_CONST_H
+	.ifnb		\load_next_consts
+	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
+	.endif
+	veor.8		\dst_reg, \dst_reg, q8
+	veor.8		\dst_reg, \dst_reg, \src_reg
+	.endm
 
-	.macro		fold16, reg, rk
-	vmull.p64	q8, \reg\()l, d20
-	vmull.p64	\reg, \reg\()h, d21
-	.ifnb		\rk
-	vld1.64		{q10}, [ip, :128]!
+	.macro		__adrl, out, sym
+	.if		__LINUX_ARM_ARCH__ < 7
+	ldr		\out, =\sym
+	.else
+	movw		\out, #:lower16:\sym
+	movt		\out, #:upper16:\sym
 	.endif
-	veor.8		q7, q7, q8
-	veor.8		q7, q7, \reg
 	.endm
 
-	fold16		q0, rk11
-	fold16		q1, rk13
-	fold16		q2, rk15
-	fold16		q3, rk17
-	fold16		q4, rk19
-	fold16		q5, rk1
-	fold16		q6
-
-	// instead of 64, we add 48 to the loop counter to save 1 instruction
-	// from the loop instead of a cmp instruction, we use the negative
-	// flag with the jl instruction
-	adds		arg3, arg3, #(128-16)
-	blt		_final_reduction_for_128
-
-	// now we have 16+y bytes left to reduce. 16 Bytes is in register v7
-	// and the rest is in memory. We can fold 16 bytes at a time if y>=16
-	// continue folding 16B at a time
-
-_16B_reduction_loop:
-	vmull.p64	q8, d14, d20
-	vmull.p64	q7, d15, d21
-	veor.8		q7, q7, q8
+//
+// u16 crc_t10dif_pmull(u16 init_crc, const u8 *buf, size_t len);
+//
+// Assumes len >= 16.
+//
+ENTRY(crc_t10dif_pmull)
 
-	vld1.64		{q0}, [arg2]!
-CPU_LE(	vrev64.8	q0, q0		)
-	vswp		d0, d1
-	veor.8		q7, q7, q0
-	subs		arg3, arg3, #16
-
-	// instead of a cmp instruction, we utilize the flags with the
-	// jge instruction equivalent of: cmp arg3, 16-16
-	// check if there is any more 16B in the buffer to be able to fold
-	bge		_16B_reduction_loop
-
-	// now we have 16+z bytes left to reduce, where 0<= z < 16.
-	// first, we reduce the data in the xmm7 register
-
-_final_reduction_for_128:
-	// check if any more data to fold. If not, compute the CRC of
-	// the final 128 bits
-	adds		arg3, arg3, #16
-	beq		_128_done
-
-	// here we are getting data that is less than 16 bytes.
-	// since we know that there was data before the pointer, we can
-	// offset the input pointer before the actual point, to receive
-	// exactly 16 bytes. after that the registers need to be adjusted.
-_get_last_two_regs:
-	add		arg2, arg2, arg3
-	sub		arg2, arg2, #16
-	vld1.64		{q1}, [arg2]
-CPU_LE(	vrev64.8	q1, q1			)
-	vswp		d2, d3
-
-	// get rid of the extra data that was loaded before
-	// load the shift constant
-	adr		ip, tbl_shf_table + 16
-	sub		ip, ip, arg3
-	vld1.8		{q0}, [ip]
-
-	// shift v2 to the left by arg3 bytes
-	vtbl.8		d4, {d14-d15}, d0
-	vtbl.8		d5, {d14-d15}, d1
-
-	// shift v7 to the right by 16-arg3 bytes
-	vmov.i8		q9, #0x80
-	veor.8		q0, q0, q9
-	vtbl.8		d18, {d14-d15}, d0
-	vtbl.8		d19, {d14-d15}, d1
-
-	// blend
-	vshr.s8		q0, q0, #7		// convert to 8-bit mask
-	vbsl.8		q0, q2, q1
-
-	// fold 16 Bytes
-	vmull.p64	q8, d18, d20
-	vmull.p64	q7, d19, d21
+	// For sizes less than 256 bytes, we can't fold 128 bytes at a time.
+	cmp		len, #256
+	blt		.Lless_than_256_bytes
+
+	__adrl		fold_consts_ptr, .Lfold_across_128_bytes_consts
+
+	// Load the first 128 data bytes.  Byte swapping is necessary to make
+	// the bit order match the polynomial coefficient order.
+	vld1.64		{q0-q1}, [buf]!
+	vld1.64		{q2-q3}, [buf]!
+	vld1.64		{q4-q5}, [buf]!
+	vld1.64		{q6-q7}, [buf]!
+CPU_LE(	vrev64.8	q0, q0	)
+CPU_LE(	vrev64.8	q1, q1	)
+CPU_LE(	vrev64.8	q2, q2	)
+CPU_LE(	vrev64.8	q3, q3	)
+CPU_LE(	vrev64.8	q4, q4	)
+CPU_LE(	vrev64.8	q5, q5	)
+CPU_LE(	vrev64.8	q6, q6	)
+CPU_LE(	vrev64.8	q7, q7	)
+	vswp		q0l, q0h
+	vswp		q1l, q1h
+	vswp		q2l, q2h
+	vswp		q3l, q3h
+	vswp		q4l, q4h
+	vswp		q5l, q5h
+	vswp		q6l, q6h
+	vswp		q7l, q7h
+
+	// XOR the first 16 data *bits* with the initial CRC value.
+	vmov.i8		q8h, #0
+	vmov.u16	q8h[3], init_crc
+	veor		q0h, q0h, q8h
+
+	// Load the constants for folding across 128 bytes.
+	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
+
+	// Subtract 128 for the 128 data bytes just consumed.  Subtract another
+	// 128 to simplify the termination condition of the following loop.
+	sub		len, len, #256
+
+	// While >= 128 data bytes remain (not counting q0-q7), fold the 128
+	// bytes q0-q7 into them, storing the result back into q0-q7.
+.Lfold_128_bytes_loop:
+	fold_32_bytes	q0, q1
+	fold_32_bytes	q2, q3
+	fold_32_bytes	q4, q5
+	fold_32_bytes	q6, q7
+	subs		len, len, #128
+	bge		.Lfold_128_bytes_loop
+
+	// Now fold the 112 bytes in q0-q6 into the 16 bytes in q7.
+
+	// Fold across 64 bytes.
+	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
+	fold_16_bytes	q0, q4
+	fold_16_bytes	q1, q5
+	fold_16_bytes	q2, q6
+	fold_16_bytes	q3, q7, 1
+	// Fold across 32 bytes.
+	fold_16_bytes	q4, q6
+	fold_16_bytes	q5, q7, 1
+	// Fold across 16 bytes.
+	fold_16_bytes	q6, q7
+
+	// Add 128 to get the correct number of data bytes remaining in 0...127
+	// (not counting q7), following the previous extra subtraction by 128.
+	// Then subtract 16 to simplify the termination condition of the
+	// following loop.
+	adds		len, len, #(128-16)
+
+	// While >= 16 data bytes remain (not counting q7), fold the 16 bytes q7
+	// into them, storing the result back into q7.
+	blt		.Lfold_16_bytes_loop_done
+.Lfold_16_bytes_loop:
+	vmull.p64	q8, q7l, FOLD_CONST_L
+	vmull.p64	q7, q7h, FOLD_CONST_H
 	veor.8		q7, q7, q8
+	vld1.64		{q0}, [buf]!
+CPU_LE(	vrev64.8	q0, q0	)
+	vswp		q0l, q0h
 	veor.8		q7, q7, q0
-
-_128_done:
-	// compute crc of a 128-bit value
-	vldr		d20, rk5
-	vldr		d21, rk6		// rk5 and rk6 in xmm10
-
-	// 64b fold
-	vext.8		q0, qzr, q7, #8
-	vmull.p64	q7, d15, d20
-	veor.8		q7, q7, q0
-
-	// 32b fold
-	vext.8		q0, q7, qzr, #12
-	vmov		s31, s3
-	vmull.p64	q0, d0, d21
-	veor.8		q7, q0, q7
-
-	// barrett reduction
-_barrett:
-	vldr		d20, rk7
-	vldr		d21, rk8
-
-	vmull.p64	q0, d15, d20
-	vext.8		q0, qzr, q0, #12
-	vmull.p64	q0, d1, d21
-	vext.8		q0, qzr, q0, #12
+	subs		len, len, #16
+	bge		.Lfold_16_bytes_loop
+
+.Lfold_16_bytes_loop_done:
+	// Add 16 to get the correct number of data bytes remaining in 0...15
+	// (not counting q7), following the previous extra subtraction by 16.
+	adds		len, len, #16
+	beq		.Lreduce_final_16_bytes
+
+.Lhandle_partial_segment:
+	// Reduce the last '16 + len' bytes where 1 <= len <= 15 and the first
+	// 16 bytes are in q7 and the rest are the remaining data in 'buf'.  To
+	// do this without needing a fold constant for each possible 'len',
+	// redivide the bytes into a first chunk of 'len' bytes and a second
+	// chunk of 16 bytes, then fold the first chunk into the second.
+
+	// q0 = last 16 original data bytes
+	add		buf, buf, len
+	sub		buf, buf, #16
+	vld1.64		{q0}, [buf]
+CPU_LE(	vrev64.8	q0, q0	)
+	vswp		q0l, q0h
+
+	// q1 = high order part of second chunk: q7 left-shifted by 'len' bytes.
+	__adrl		r3, .Lbyteshift_table + 16
+	sub		r3, r3, len
+	vld1.8		{q2}, [r3]
+	vtbl.8		q1l, {q7l-q7h}, q2l
+	vtbl.8		q1h, {q7l-q7h}, q2h
+
+	// q3 = first chunk: q7 right-shifted by '16-len' bytes.
+	vmov.i8		q3, #0x80
+	veor.8		q2, q2, q3
+	vtbl.8		q3l, {q7l-q7h}, q2l
+	vtbl.8		q3h, {q7l-q7h}, q2h
+
+	// Convert to 8-bit masks: 'len' 0x00 bytes, then '16-len' 0xff bytes.
+	vshr.s8		q2, q2, #7
+
+	// q2 = second chunk: 'len' bytes from q0 (low-order bytes),
+	// then '16-len' bytes from q1 (high-order bytes).
+	vbsl.8		q2, q1, q0
+
+	// Fold the first chunk into the second chunk, storing the result in q7.
+	vmull.p64	q0, q3l, FOLD_CONST_L
+	vmull.p64	q7, q3h, FOLD_CONST_H
 	veor.8		q7, q7, q0
-	vmov		r0, s29
-
-_cleanup:
-	// scale the result back to 16 bits
-	lsr		r0, r0, #16
+	veor.8		q7, q7, q2
+
+.Lreduce_final_16_bytes:
+	// Reduce the 128-bit value M(x), stored in q7, to the final 16-bit CRC.
+
+	// Load 'x^48 * (x^48 mod G(x))' and 'x^48 * (x^80 mod G(x))'.
+	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
+
+	// Fold the high 64 bits into the low 64 bits, while also multiplying by
+	// x^64.  This produces a 128-bit value congruent to x^64 * M(x) and
+	// whose low 48 bits are 0.
+	vmull.p64	q0, q7h, FOLD_CONST_H	// high bits * x^48 * (x^80 mod G(x))
+	veor.8		q0h, q0h, q7l		// + low bits * x^64
+
+	// Fold the high 32 bits into the low 96 bits.  This produces a 96-bit
+	// value congruent to x^64 * M(x) and whose low 48 bits are 0.
+	vmov.i8		q1, #0
+	vmov		s4, s3			// extract high 32 bits
+	vmov		s3, s5			// zero high 32 bits
+	vmull.p64	q1, q1l, FOLD_CONST_L	// high 32 bits * x^48 * (x^48 mod G(x))
+	veor.8		q0, q0, q1		// + low bits
+
+	// Load G(x) and floor(x^48 / G(x)).
+	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]
+
+	// Use Barrett reduction to compute the final CRC value.
+	vmull.p64	q1, q0h, FOLD_CONST_H	// high 32 bits * floor(x^48 / G(x))
+	vshr.u64	q1l, q1l, #32		// /= x^32
+	vmull.p64	q1, q1l, FOLD_CONST_L	// *= G(x)
+	vshr.u64	q0l, q0l, #48
+	veor.8		q0l, q0l, q1l		// + low 16 nonzero bits
+	// Final CRC value (x^16 * M(x)) mod G(x) is in low 16 bits of q0.
+
+	vmov.u16	r0, q0l[0]
 	bx		lr
 
-_less_than_128:
-	teq		arg3, #0
-	beq		_cleanup
+.Lless_than_256_bytes:
+	// Checksumming a buffer of length 16...255 bytes
 
-	vmov.i8		q0, #0
-	vmov		s3, arg1_low32		// get the initial crc value
+	__adrl		fold_consts_ptr, .Lfold_across_16_bytes_consts
 
-	vld1.64		{q7}, [arg2]!
-CPU_LE(	vrev64.8	q7, q7		)
-	vswp		d14, d15
-	veor.8		q7, q7, q0
+	// Load the first 16 data bytes.
+	vld1.64		{q7}, [buf]!
+CPU_LE(	vrev64.8	q7, q7	)
+	vswp		q7l, q7h
 
-	cmp		arg3, #16
-	beq		_128_done		// exactly 16 left
+	// XOR the first 16 data *bits* with the initial CRC value.
+	vmov.i8		q0h, #0
+	vmov.u16	q0h[3], init_crc
+	veor.8		q7h, q7h, q0h
 
-	// now if there is, load the constants
-	vldr		d20, rk1
-	vldr		d21, rk2		// rk1 and rk2 in xmm10
+	// Load the fold-across-16-bytes constants.
+	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
 
-	// check if there is enough buffer to be able to fold 16B at a time
-	subs		arg3, arg3, #32
-	addlt		arg3, arg3, #16
-	blt		_get_last_two_regs
-	b		_16B_reduction_loop
+	cmp		len, #16
+	beq		.Lreduce_final_16_bytes		// len == 16
+	subs		len, len, #32
+	addlt		len, len, #16
+	blt		.Lhandle_partial_segment	// 17 <= len <= 31
+	b		.Lfold_16_bytes_loop		// 32 <= len <= 255
 ENDPROC(crc_t10dif_pmull)
 
-// precomputed constants
-// these constants are precomputed from the poly:
-// 0x8bb70000 (0x8bb7 scaled to 32 bits)
+	.section	".rodata", "a"
 	.align		4
-// Q = 0x18BB70000
-// rk1 = 2^(32*3) mod Q << 32
-// rk2 = 2^(32*5) mod Q << 32
-// rk3 = 2^(32*15) mod Q << 32
-// rk4 = 2^(32*17) mod Q << 32
-// rk5 = 2^(32*3) mod Q << 32
-// rk6 = 2^(32*2) mod Q << 32
-// rk7 = floor(2^64/Q)
-// rk8 = Q
-
-rk3:	.quad		0x9d9d000000000000
-rk4:	.quad		0x7cf5000000000000
-rk5:	.quad		0x2d56000000000000
-rk6:	.quad		0x1368000000000000
-rk7:	.quad		0x00000001f65a57f8
-rk8:	.quad		0x000000018bb70000
-rk9:	.quad		0xceae000000000000
-rk10:	.quad		0xbfd6000000000000
-rk11:	.quad		0x1e16000000000000
-rk12:	.quad		0x713c000000000000
-rk13:	.quad		0xf7f9000000000000
-rk14:	.quad		0x80a6000000000000
-rk15:	.quad		0x044c000000000000
-rk16:	.quad		0xe658000000000000
-rk17:	.quad		0xad18000000000000
-rk18:	.quad		0xa497000000000000
-rk19:	.quad		0x6ee3000000000000
-rk20:	.quad		0xe7b5000000000000
-rk1:	.quad		0x2d56000000000000
-rk2:	.quad		0x06df000000000000
-
-tbl_shf_table:
-// use these values for shift constants for the tbl/tbx instruction
-// different alignments result in values as shown:
-//	DDQ 0x008f8e8d8c8b8a898887868584838281 # shl 15 (16-1) / shr1
-//	DDQ 0x01008f8e8d8c8b8a8988878685848382 # shl 14 (16-3) / shr2
-//	DDQ 0x0201008f8e8d8c8b8a89888786858483 # shl 13 (16-4) / shr3
-//	DDQ 0x030201008f8e8d8c8b8a898887868584 # shl 12 (16-4) / shr4
-//	DDQ 0x04030201008f8e8d8c8b8a8988878685 # shl 11 (16-5) / shr5
-//	DDQ 0x0504030201008f8e8d8c8b8a89888786 # shl 10 (16-6) / shr6
-//	DDQ 0x060504030201008f8e8d8c8b8a898887 # shl 9  (16-7) / shr7
-//	DDQ 0x07060504030201008f8e8d8c8b8a8988 # shl 8  (16-8) / shr8
-//	DDQ 0x0807060504030201008f8e8d8c8b8a89 # shl 7  (16-9) / shr9
-//	DDQ 0x090807060504030201008f8e8d8c8b8a # shl 6  (16-10) / shr10
-//	DDQ 0x0a090807060504030201008f8e8d8c8b # shl 5  (16-11) / shr11
-//	DDQ 0x0b0a090807060504030201008f8e8d8c # shl 4  (16-12) / shr12
-//	DDQ 0x0c0b0a090807060504030201008f8e8d # shl 3  (16-13) / shr13
-//	DDQ 0x0d0c0b0a090807060504030201008f8e # shl 2  (16-14) / shr14
-//	DDQ 0x0e0d0c0b0a090807060504030201008f # shl 1  (16-15) / shr15
 
+// Fold constants precomputed from the polynomial 0x18bb7
+// G(x) = x^16 + x^15 + x^11 + x^9 + x^8 + x^7 + x^5 + x^4 + x^2 + x^1 + x^0
+.Lfold_across_128_bytes_consts:
+	.quad		0x0000000000006123	// x^(8*128)	mod G(x)
+	.quad		0x0000000000002295	// x^(8*128+64)	mod G(x)
+// .Lfold_across_64_bytes_consts:
+	.quad		0x0000000000001069	// x^(4*128)	mod G(x)
+	.quad		0x000000000000dd31	// x^(4*128+64)	mod G(x)
+// .Lfold_across_32_bytes_consts:
+	.quad		0x000000000000857d	// x^(2*128)	mod G(x)
+	.quad		0x0000000000007acc	// x^(2*128+64)	mod G(x)
+.Lfold_across_16_bytes_consts:
+	.quad		0x000000000000a010	// x^(1*128)	mod G(x)
+	.quad		0x0000000000001faa	// x^(1*128+64)	mod G(x)
+// .Lfinal_fold_consts:
+	.quad		0x1368000000000000	// x^48 * (x^48 mod G(x))
+	.quad		0x2d56000000000000	// x^48 * (x^80 mod G(x))
+// .Lbarrett_reduction_consts:
+	.quad		0x0000000000018bb7	// G(x)
+	.quad		0x00000001f65a57f8	// floor(x^48 / G(x))
+
+// For 1 <= len <= 15, the 16-byte vector beginning at &byteshift_table[16 -
+// len] is the index vector to shift left by 'len' bytes, and is also {0x80,
+// ..., 0x80} XOR the index vector to shift right by '16 - len' bytes.
+.Lbyteshift_table:
 	.byte		 0x0, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87
 	.byte		0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f
 	.byte		 0x0,  0x1,  0x2,  0x3,  0x4,  0x5,  0x6,  0x7
diff --git a/arch/arm/crypto/crct10dif-ce-glue.c b/arch/arm/crypto/crct10dif-ce-glue.c
index 14c19c70a8416..3d6b800b83965 100644
--- a/arch/arm/crypto/crct10dif-ce-glue.c
+++ b/arch/arm/crypto/crct10dif-ce-glue.c
@@ -21,7 +21,7 @@ 
 
 #define CRC_T10DIF_PMULL_CHUNK_SIZE	16U
 
-asmlinkage u16 crc_t10dif_pmull(u16 init_crc, const u8 buf[], u32 len);
+asmlinkage u16 crc_t10dif_pmull(u16 init_crc, const u8 *buf, size_t len);
 
 static int crct10dif_init(struct shash_desc *desc)
 {