@@ -36,6 +36,15 @@
};
};
+
+ audio_mclk: clk_div1 {
+ pinconf {
+ pins = "gpio15";
+ function = "func1";
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ };
+ };
+
volume_up_gpio: pm8996_gpio2 {
pinconf {
pins = "gpio2";
@@ -18,6 +18,8 @@
#include "apq8096-db820c-pmic-pins.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
/*
* GPIO name legend: proper name = the GPIO line is used as GPIO
@@ -63,6 +65,7 @@
};
clocks {
+ compatible = "simple-bus";
divclk4: divclk4 {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -72,6 +75,15 @@
pinctrl-names = "default";
pinctrl-0 = <&divclk4_pin_a>;
};
+
+ div1_mclk: divclk1 {
+ compatible = "gpio-gate-clock";
+ pinctrl-0 = <&audio_mclk>;
+ pinctrl-names = "default";
+ clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+ #clock-cells = <0>;
+ enable-gpios = <&pm8994_gpios 15 0>;
+ };
};
soc {
@@ -453,6 +465,16 @@
};
};
+ slim_msm: slim@91c0000 {
+ ngd@1 {
+ wcd9335: codec@1{
+ clock-names = "mclk", "slimbus";
+ clocks = <&div1_mclk>,
+ <&rpmcc RPM_SMD_BB_CLK1>;
+ };
+ };
+ };
+
mdss@900000 {
status = "okay";
@@ -479,6 +501,10 @@
core-vcc-supply = <&pm8994_s4>;
};
};
+
+ remoteproc@2080000 {
+ status = "okay";
+ };
};
@@ -666,3 +692,75 @@
};
};
};
+
+&sound {
+ compatible = "qcom,apq8096-sndcard";
+ model = "DB820c";
+ audio-routing = "RX_BIAS", "MCLK";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ hdmi-dai-link {
+ link-name = "HDMI";
+ cpu {
+ sound-dai = <&q6afedai HDMI_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&hdmi 0>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_6_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 6>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 1>;
+ };
+ };
+};
@@ -13,6 +13,52 @@
&msmgpio {
+ wcd9xxx_intr {
+ wcd_intr_default: wcd_intr_default{
+ mux {
+ pins = "gpio54";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio54";
+ drive-strength = <2>; /* 2 mA */
+ bias-pull-down; /* pull down */
+ input-enable;
+ };
+ };
+ };
+
+
+ cdc_reset_ctrl {
+ cdc_reset_sleep: cdc_reset_sleep {
+ mux {
+ pins = "gpio64";
+ function = "gpio";
+ };
+ config {
+ pins = "gpio64";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+ };
+ cdc_reset_active:cdc_reset_active {
+ mux {
+ pins = "gpio64";
+ function = "gpio";
+ };
+ config {
+ pins = "gpio64";
+ drive-strength = <16>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+ };
+
+
+
blsp1_spi0_default: blsp1_spi0_default {
pinmux {
function = "blsp_spi1";
@@ -14,6 +14,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/soc/qcom,apr.h>
/ {
interrupt-parent = <&intc>;
@@ -1178,6 +1179,33 @@
power-domains = <&mmcc MDSS_GDSC>;
};
+ lpass_q6_smmu: arm,smmu-lpass_q6@1600000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x1600000 0x20000>;
+ #iommu-cells = <1>;
+ power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
+ <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
+ clock-names = "iface", "bus";
+ status = "okay";
+ };
+
agnoc@0 {
power-domains = <&gcc AGGRE0_NOC_GDSC>;
compatible = "simple-pm-bus";
@@ -1344,6 +1372,66 @@
};
};
+ slimbam:dma@9184000
+ {
+ compatible = "qcom,bam-v1.7.0";
+ qcom,controlled-remotely;
+ reg = <0x9184000 0x32000>;
+ num-channels = <31>;
+ interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <1>;
+ qcom,num-ees = <2>;
+ };
+
+ slim_msm: slim@91c0000 {
+ compatible = "qcom,slim-ngd-v1.5.0";
+ reg = <0x91c0000 0x2C000>;
+ reg-names = "ctrl";
+ interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&slimbam 3>, <&slimbam 4>,
+ <&slimbam 5>, <&slimbam 6>;
+ dma-names = "rx", "tx", "tx2", "rx2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ngd@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tasha_ifd: tas-ifd {
+ compatible = "slim217,1a0";
+ reg = <0 0>;
+ };
+
+ wcd9335: codec@1{
+ pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+ pinctrl-names = "default";
+
+ compatible = "slim217,1a0";
+ reg = <1 0>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr1", "intr2";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reset-gpios = <&msmgpio 64 0>;
+
+ slim-ifc-dev = <&tasha_ifd>;
+
+ vdd-buck-supply = <&pm8994_s4>;
+ vdd-buck-sido-supply = <&pm8994_s4>;
+ vdd-tx-supply = <&pm8994_s4>;
+ vdd-rx-supply = <&pm8994_s4>;
+ vdd-io-supply = <&pm8994_s4>;
+
+ #sound-dai-cells = <1>;
+ };
+ };
+ };
+
gpu@b00000 {
compatible = "qcom,adreno-530.2", "qcom,adreno";
#stream-id-cells = <16>;
@@ -1473,6 +1561,7 @@
phys = <&hdmi_phy>;
phy-names = "hdmi_phy";
+ #sound-dai-cells = <1>;
ports {
#address-cells = <1>;
@@ -1511,6 +1600,9 @@
};
};
+ sound: sound {
+ };
+
adsp-pil {
compatible = "qcom,msm8996-adsp-pil";
@@ -1537,6 +1629,54 @@
mboxes = <&apcs_glb 8>;
qcom,smd-edge = <1>;
qcom,remote-pid = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ apr {
+ power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
+ compatible = "qcom,apr-v2";
+ qcom,smd-channels = "apr_audio_svc";
+ reg = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6core {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ };
+
+ q6afe: q6afe {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ hdmi@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ q6asm: q6asm {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #sound-dai-cells = <1>;
+ iommus = <&lpass_q6_smmu 1>;
+ };
+ };
+
+ q6adm: q6adm {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
};
};
This patch adds support both digital and analog audio on DB820c. This board has HDMI port and 3.5mm audio jack to support both digital and analog audio respectively. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- .../dts/qcom/apq8096-db820c-pmic-pins.dtsi | 9 ++ arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 98 ++++++++++++ arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 46 ++++++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 140 ++++++++++++++++++ 4 files changed, 293 insertions(+)