diff mbox series

[PATCHv4] arm64: dts: allwinner: a64: teres-i: enable backlight

Message ID 20190209104018.6765-1-harald@ccbib.org (mailing list archive)
State Mainlined, archived
Commit 24bd5d2cb93bc282e3c15e4d10fcd3210192f954
Headers show
Series [PATCHv4] arm64: dts: allwinner: a64: teres-i: enable backlight | expand

Commit Message

Harald Geyer Feb. 9, 2019, 10:40 a.m. UTC
Enable pwm and add a pretty standard backlight node.

The regulator is always on, but we include it anyway, because it is
required by the binding document.

Signed-off-by: Harald Geyer <harald@ccbib.org>
---
Changes since v3:
 * Adjust brightness-levels to follow closer to an exponential law
 * Change default value to have a similar brightness to what we had
   before.

Changes since v2:
 * Drop all the other stuff that got merged a year ago.
 * Rebased on current sunxi/for-next branch
 * Add power-supply property (just to conform to the binding)
 * Use slightly different brightness-levels

Actually I tried omitting brightness-levels completely, as it is now
optional. However automatic calculation gives unreasonable results
(depending on the exact value of pwm period). A report has been sent
to the author of the code.


 .../arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Maxime Ripard Feb. 12, 2019, 8:34 a.m. UTC | #1
On Sat, Feb 09, 2019 at 10:40:18AM +0000, Harald Geyer wrote:
> Enable pwm and add a pretty standard backlight node.
> 
> The regulator is always on, but we include it anyway, because it is
> required by the binding document.
> 
> Signed-off-by: Harald Geyer <harald@ccbib.org>

Applied, thanks!
Maxime
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 7b7b14ba58e6..0ec46b969a75 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -21,6 +21,15 @@ 
 		serial0 = &uart0;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 0>;
+		power-supply = <&reg_dcdc1>;
+		brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>;
+		default-brightness-level = <5>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 
@@ -131,6 +140,10 @@ 
 	status = "okay";
 };
 
+&pwm {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";