| Message ID | 20190301185212.26837-1-andreas@kemnade.info (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board | expand |
ping On Fri, 1 Mar 2019 19:52:12 +0100 Andreas Kemnade <andreas@kemnade.info> wrote: > The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip > with broadcom internals attached to UART1 and some gpios. > This addition is in line with similar boards > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > --- > changes in v2: remove pinctrl things > arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts > index 1db2541135a7..57432d0500b1 100644 > --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts > +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts > @@ -69,6 +69,8 @@ > compatible = "mmc-pwrseq-simple"; > pinctrl-names = "default"; > reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ > + clocks = <&rtc 1>; > + clock-names = "ext_clock"; > }; > }; > > @@ -122,7 +124,20 @@ > &uart1 { > pinctrl-names = "default"; > pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; > + uart-has-rtscts; > status = "okay"; > + > + bluetooth { > + compatible = "brcm,bcm43438-bt"; > + clocks = <&rtc 1>; > + clock-names = "lpo"; > + vbat-supply = <®_vcc3v3>; > + vddio-supply = <®_vcc3v3>; > + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ > + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ > + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ > + }; > + > }; > > &usb_otg { > -- > 2.11.0 > >
On Sun, Apr 07, 2019 at 10:23:21PM +0200, Andreas Kemnade wrote: > ping > > On Fri, 1 Mar 2019 19:52:12 +0100 > Andreas Kemnade <andreas@kemnade.info> wrote: > > > The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip > > with broadcom internals attached to UART1 and some gpios. > > This addition is in line with similar boards > > > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> I never received that patch, who did you send it to? Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
On Sat, Mar 2, 2019 at 2:53 AM Andreas Kemnade <andreas@kemnade.info> wrote: > > The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip > with broadcom internals attached to UART1 and some gpios. ^ Broadcom > This addition is in line with similar boards This sentence is unfinished. > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> ChenYu
Hi, On Mon, 8 Apr 2019 10:14:04 +0200 Maxime Ripard <maxime.ripard@bootlin.com> wrote: > On Sun, Apr 07, 2019 at 10:23:21PM +0200, Andreas Kemnade wrote: > > ping > > > > On Fri, 1 Mar 2019 19:52:12 +0100 > > Andreas Kemnade <andreas@kemnade.info> wrote: > > > > > The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip > > > with broadcom internals attached to UART1 and some gpios. > > > This addition is in line with similar boards > > > > > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > > I never received that patch, who did you send it to? > Seems that I only have sent you the first version of that patch. Somehow I must have left you out during copy and paste of adresses. Regards, Andreas
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 1db2541135a7..57432d0500b1 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -69,6 +69,8 @@ compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -122,7 +124,20 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; + }; &usb_otg {
The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip with broadcom internals attached to UART1 and some gpios. This addition is in line with similar boards Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- changes in v2: remove pinctrl things arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)