diff mbox series

[v9,5/7] ARM: tegra: Don't apply CPU erratas in insecure mode

Message ID 20190303171214.24821-6-digetx@gmail.com (mailing list archive)
State New, archived
Headers show
Series Support Trusted Foundations firmware on Tegra30 | expand

Commit Message

Dmitry Osipenko March 3, 2019, 5:12 p.m. UTC
CPU isn't allowed to touch secure registers while running under secure
monitor. Hence skip applying of CPU erratas in the reset handler if
Trusted Foundations firmware presents.

Partially based on work done by Michał Mirosław [1].

[1] https://www.spinics.net/lists/arm-kernel/msg594768.html

Tested-by: Robert Yang <decatf@gmail.com>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm/mach-tegra/reset-handler.S | 23 ++++++++++++-----------
 arch/arm/mach-tegra/reset.c         |  3 +++
 arch/arm/mach-tegra/reset.h         |  9 +++++++--
 arch/arm/mach-tegra/sleep-tegra20.S |  4 ++++
 4 files changed, 26 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index e22ccf87eded..809fbc200cef 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -29,8 +29,6 @@ 
 
 #define PMC_SCRATCH41	0x140
 
-#define RESET_DATA(x)	((TEGRA_RESET_##x)*4)
-
 #ifdef CONFIG_PM_SLEEP
 /*
  *	tegra_resume
@@ -121,6 +119,12 @@  ENTRY(__tegra_cpu_reset_handler)
 	cpsid	aif, 0x13			@ SVC mode, interrupts disabled
 
 	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
+
+	adr	r12, __tegra_cpu_reset_handler_data
+	ldr	r5, [r12, #RESET_DATA(TF_PRESENT)]
+	cmp	r5, #0
+	bne	after_errata
+
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
 t20_check:
 	cmp	r6, #TEGRA20
@@ -155,7 +159,6 @@  after_errata:
 	and	r10, r10, #0x3			@ R10 = CPU number
 	mov	r11, #1
 	mov	r11, r11, lsl r10  		@ R11 = CPU mask
-	adr	r12, __tegra_cpu_reset_handler_data
 
 #ifdef CONFIG_SMP
 	/* Does the OS know about this CPU? */
@@ -169,10 +172,9 @@  after_errata:
 	cmp	r6, #TEGRA20
 	bne	1f
 	/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
-	mov32	r5, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET
 	mov	r0, #CPU_NOT_RESETTABLE
 	cmp	r10, #0
-	strbne	r0, [r5, #__tegra20_cpu1_resettable_status_offset]
+	strbne	r0, [r12, #RESET_DATA(RESETTABLE_STATUS)]
 1:
 #endif
 
@@ -277,14 +279,13 @@  ENDPROC(__tegra_cpu_reset_handler)
 	.align L1_CACHE_SHIFT
 	.type	__tegra_cpu_reset_handler_data, %object
 	.globl	__tegra_cpu_reset_handler_data
+	.globl	__tegra_cpu_reset_handler_data_offset
+	.equ	__tegra_cpu_reset_handler_data_offset, \
+					. - __tegra_cpu_reset_handler_start
 __tegra_cpu_reset_handler_data:
-	.rept	TEGRA_RESET_DATA_SIZE
-	.long	0
+	.rept   TEGRA_RESET_DATA_SIZE
+	.long   0
 	.endr
-	.globl	__tegra20_cpu1_resettable_status_offset
-	.equ	__tegra20_cpu1_resettable_status_offset, \
-					. - __tegra_cpu_reset_handler_start
-	.byte	0
 	.align L1_CACHE_SHIFT
 
 ENTRY(__tegra_cpu_reset_handler_end)
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index dc558892753c..b02ae7699842 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -24,6 +24,7 @@ 
 #include <asm/cacheflush.h>
 #include <asm/firmware.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/trusted_foundations.h>
 
 #include "iomap.h"
 #include "irammap.h"
@@ -89,6 +90,8 @@  static void __init tegra_cpu_reset_handler_enable(void)
 
 void __init tegra_cpu_reset_handler_init(void)
 {
+	__tegra_cpu_reset_handler_data[TEGRA_RESET_TF_PRESENT] =
+		trusted_foundations_registered();
 
 #ifdef CONFIG_SMP
 	__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] =
diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h
index 9c479c7925b8..db0e6b3097ab 100644
--- a/arch/arm/mach-tegra/reset.h
+++ b/arch/arm/mach-tegra/reset.h
@@ -25,7 +25,11 @@ 
 #define TEGRA_RESET_STARTUP_SECONDARY	3
 #define TEGRA_RESET_STARTUP_LP2		4
 #define TEGRA_RESET_STARTUP_LP1		5
-#define TEGRA_RESET_DATA_SIZE		6
+#define TEGRA_RESET_RESETTABLE_STATUS	6
+#define TEGRA_RESET_TF_PRESENT		7
+#define TEGRA_RESET_DATA_SIZE		8
+
+#define RESET_DATA(x)	((TEGRA_RESET_##x)*4)
 
 #ifndef __ASSEMBLY__
 
@@ -49,7 +53,8 @@  void __tegra_cpu_reset_handler_end(void);
 	 (u32)__tegra_cpu_reset_handler_start)))
 #define tegra20_cpu1_resettable_status \
 	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
-	 (u32)__tegra20_cpu1_resettable_status_offset))
+	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_RESETTABLE_STATUS] - \
+	 (u32)__tegra_cpu_reset_handler_start)))
 #endif
 
 #define tegra_cpu_reset_handler_offset \
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index dedeebfccc55..50d51d3465f6 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -28,6 +28,7 @@ 
 #include <asm/cache.h>
 
 #include "irammap.h"
+#include "reset.h"
 #include "sleep.h"
 
 #define EMC_CFG				0xc
@@ -53,6 +54,9 @@ 
 #define APB_MISC_XM2CFGCPADCTRL2	0x8e4
 #define APB_MISC_XM2CFGDPADCTRL2	0x8e8
 
+#define __tegra20_cpu1_resettable_status_offset \
+	(__tegra_cpu_reset_handler_data_offset + RESET_DATA(RESETTABLE_STATUS))
+
 .macro pll_enable, rd, r_car_base, pll_base
 	ldr	\rd, [\r_car_base, #\pll_base]
 	tst	\rd, #(1 << 30)