diff mbox series

[v3,5/5] arm64: dts: rockchip: Enable dmc and dfi nodes on gru.

Message ID 20190321231440.19031-6-gael.portay@collabora.com (mailing list archive)
State New, archived
Headers show
Series Add support for drm/rockchip to dynamically control the DDR frequency. | expand

Commit Message

Gaël PORTAY March 21, 2019, 11:14 p.m. UTC 
From: Lin Huang <hl@rock-chips.com>

Enable the DMC (Dynamic Memory Controller) and the DFI (DDR PHY Interface)
nodes on gru/kevin boards so we can support DDR DVFS.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
---

Changes in v3:
- [PATCH v2 5/5] Remove display_subsystem nodes.

Changes in v2:
- [PATCH 8/8] Move center-supply attribute of dmc node in file
              rk3399-gru-chromebook.dtsi (where ppvar_centerlogic is
	      defined).

Changes in v1: None

 .../boot/dts/rockchip/rk3399-gru-chromebook.dtsi |  4 ++++
 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi     | 16 ++++++++++++++++
 2 files changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 931640e9aed4..cfb81356c61e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -400,3 +400,7 @@  ap_i2c_tp: &i2c5 {
 		rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
 	};
 };
+
+&dmc {
+	center-supply = <&ppvar_centerlogic>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index da03fa9c5662..1bde7ad3b980 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -289,6 +289,12 @@ 
 	status = "okay";
 };
 
+&dmc_opp_table {
+	opp04 {
+		opp-suspend;
+	};
+};
+
 /*
  * Set some suspend operating points to avoid OVP in suspend
  *
@@ -489,6 +495,16 @@  ap_i2c_audio: &i2c8 {
 	status = "okay";
 };
 
+&dfi {
+	status = "okay";
+};
+
+&dmc {
+	status = "okay";
+	upthreshold = <25>;
+	downdifferential = <15>;
+};
+
 &sdhci {
 	/*
 	 * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the