[V2,1/9] spi: bcm2835aux: unifying code between polling and interrupt driven code

Commit Message

Martin Sperl March 24, 2019, 5:49 p.m. UTC

From: Martin Sperl <[e-mail]>

Sharing more code between polling and interrupt-driven mode.

Signed-off-by: Martin Sperl <[e-mail]>
---
 drivers/spi/spi-bcm2835aux.c | 51 ++++++++++++++++----------------------------
 1 file changed, 18 insertions(+), 33 deletions(-)

--
2.11.0

Patch

diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
index f7e054848ca5..41366d0a16af 100644
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -178,23 +178,13 @@  static void bcm2835aux_spi_reset_hw(struct bcm2835aux_spi *bs)
 		      BCM2835_AUX_SPI_CNTL0_CLEARFIFO);
 }

-static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
+static void bcm2835aux_spi_transfer_helper(struct bcm2835aux_spi *bs)
 {
-	struct spi_master *master = dev_id;
-	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
-	irqreturn_t ret = IRQ_NONE;
-
-	/* IRQ may be shared, so return if our interrupts are disabled */
-	if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) &
-	      (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE)))
-		return ret;
-
 	/* check if we have data to read */
 	while (bs->rx_len &&
 	       (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
 		  BCM2835_AUX_SPI_STAT_RX_EMPTY))) {
 		bcm2835aux_rd_fifo(bs);
-		ret = IRQ_HANDLED;
 	}

 	/* check if we have data to write */
@@ -203,7 +193,6 @@  static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
 	       (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
 		  BCM2835_AUX_SPI_STAT_TX_FULL))) {
 		bcm2835aux_wr_fifo(bs);
-		ret = IRQ_HANDLED;
 	}

 	/* and check if we have reached "done" */
@@ -211,8 +200,21 @@  static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
 	       (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
 		  BCM2835_AUX_SPI_STAT_BUSY))) {
 		bcm2835aux_rd_fifo(bs);
-		ret = IRQ_HANDLED;
 	}
+}
+
+static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
+{
+	struct spi_master *master = dev_id;
+	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+
+	/* IRQ may be shared, so return if our interrupts are disabled */
+	if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) &
+	      (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE)))
+		return IRQ_NONE;
+
+	/* do common fifo handling */
+	bcm2835aux_spi_transfer_helper(bs);

 	if (!bs->tx_len) {
 		/* disable tx fifo empty interrupt */
@@ -226,8 +228,7 @@  static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
 		complete(&master->xfer_completion);
 	}

-	/* and return */
-	return ret;
+	return IRQ_HANDLED;
 }

 static int __bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
@@ -273,7 +274,6 @@  static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
 {
 	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
 	unsigned long timeout;
-	u32 stat;

 	/* configure spi */
 	bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
@@ -284,24 +284,9 @@  static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,

 	/* loop until finished the transfer */
 	while (bs->rx_len) {
-		/* read status */
-		stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT);
-
-		/* fill in tx fifo with remaining data */
-		if ((bs->tx_len) && (!(stat & BCM2835_AUX_SPI_STAT_TX_FULL))) {
-			bcm2835aux_wr_fifo(bs);
-			continue;
-		}

-		/* read data from fifo for both cases */
-		if (!(stat & BCM2835_AUX_SPI_STAT_RX_EMPTY)) {
-			bcm2835aux_rd_fifo(bs);
-			continue;
-		}
-		if (!(stat & BCM2835_AUX_SPI_STAT_BUSY)) {
-			bcm2835aux_rd_fifo(bs);
-			continue;
-		}
+		/* do common fifo handling */
+		bcm2835aux_spi_transfer_helper(bs);

 		/* there is still data pending to read check the timeout */
 		if (bs->rx_len && time_after(jiffies, timeout)) {