From patchwork Mon Mar 25 12:41:34 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "zhiyong.tao" X-Patchwork-Id: 10869037 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 260681390 for ; Mon, 25 Mar 2019 12:42:08 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 0B85D292EF for ; Mon, 25 Mar 2019 12:42:08 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id EF74329366; Mon, 25 Mar 2019 12:42:07 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-5.2 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED,UNPARSEABLE_RELAY autolearn=ham version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 8BC0D292EF for ; Mon, 25 Mar 2019 12:42:05 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=Vai+qf0uusYlwR9gYKQurXE61aJQTSV5rNrAEaHJTfY=; b=eZKKOXI43yOA7T 7o4AR70BfzFfTpMFYbr/0W+8XDmT0a5Y82YmwXSqdGiNRuiEqoV0sBl2BAjFhaLTVU8qzm09y5zg2 p8Le+OJmSxfj77SH8DSQkpkWP1v8hXoKiM2W7nXmcaTQQpcYWxJEprsNU43Z8Qgx3ycZnM+KXZ0fr cklp/H44UYIKxUpKj7QKzGtwwB6UOtztmjKvh2Sf0M1VaBbQ9L07hgDUmSKESb9QTgdYZtO6N9q8P ViyV4B4RbzMSVMMh/uYxigL2MDlEs8NACACIKhywr/ax/t/Zy+hlN3JI3iUtSttCWFLxGFM4wwn3p UPGQBGTWGPxGnhMot2HA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1h8OvS-0003cJ-7m; Mon, 25 Mar 2019 12:42:02 +0000 Received: from mailgw02.mediatek.com ([216.200.240.185]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1h8OvI-0003ab-HH; Mon, 25 Mar 2019 12:41:59 +0000 X-UUID: 331d531600ff4d7e9f36eba3b6f289d7-20190325 X-UUID: 331d531600ff4d7e9f36eba3b6f289d7-20190325 Received: from mtkcas66.mediatek.inc [(172.29.193.44)] by mailgw02.mediatek.com (envelope-from ) (musrelay.mediatek.com ESMTP with TLS) with ESMTP id 1002840318; Mon, 25 Mar 2019 04:41:44 -0800 Received: from MTKMBS01DR.mediatek.inc (172.21.101.111) by MTKMBS62DR.mediatek.inc (172.29.94.18) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Mon, 25 Mar 2019 05:41:43 -0700 Received: from MTKCAS06.mediatek.inc (172.21.101.30) by mtkmbs01dr.mediatek.inc (172.21.101.111) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Mon, 25 Mar 2019 20:41:41 +0800 Received: from localhost.localdomain (10.17.3.153) by MTKCAS06.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1395.4 via Frontend Transport; Mon, 25 Mar 2019 20:41:40 +0800 From: Zhiyong Tao To: , , , , Subject: [PATCH RESEND v3 1/4] dt-bindings: pinctrl: mt8183: add binding document Date: Mon, 25 Mar 2019 20:41:34 +0800 Message-ID: <20190325124137.6117-2-zhiyong.tao@mediatek.com> X-Mailer: git-send-email 2.12.5 In-Reply-To: <20190325124137.6117-1-zhiyong.tao@mediatek.com> References: <20190325124137.6117-1-zhiyong.tao@mediatek.com> MIME-Version: 1.0 X-MTK: N X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20190325_054152_594331_49A57804 X-CRM114-Status: GOOD ( 16.33 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, sean.wang@mediatek.com, srv_heupstream@mediatek.com, chuanjia.liu@mediatek.com, biao.huang@mediatek.com, zhiyong.tao@mediatek.com, erin.lo@mediatek.com, hui.liu@mediatek.com, linux-kernel@vger.kernel.org, hongzhou.yang@mediatek.com, linux-mediatek@lists.infradead.org, linux-gpio@vger.kernel.org, eddie.huang@mediatek.com, linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP The commit adds mt8183 compatible node in binding document. Signed-off-by: Zhiyong Tao Reviewed-by: Rob Herring --- .../devicetree/bindings/pinctrl/pinctrl-mt8183.txt | 132 +++++++++++++++++++++ 1 file changed, 132 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt new file mode 100644 index 000000000000..eccbe3f55d3f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt @@ -0,0 +1,132 @@ +* Mediatek MT8183 Pin Controller + +The Mediatek's Pin controller is used to control SoC pins. + +Required properties: +- compatible: value should be one of the following. + "mediatek,mt8183-pinctrl", compatible with mt8183 pinctrl. +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. +- gpio-ranges : gpio valid number range. +- reg: physical address base for gpio base registers. There are 10 GPIO + physical address base in mt8183. + +Optional properties: +- reg-names: gpio base register names. There are 10 gpio base register + names in mt8183. They are "iocfg0", "iocfg1", "iocfg2", "iocfg3", "iocfg4", + "iocfg5", "iocfg6", "iocfg7", "iocfg8", "eint". +- interrupt-controller: Marks the device node as an interrupt controller +- #interrupt-cells: Should be two. +- interrupts : The interrupt outputs to sysirq. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices. + +Subnode format +A pinctrl node should contain at least one subnodes representing the +pinctrl groups available on the machine. Each subnode will list the +pins it needs, and how they should be configured, with regard to muxer +configuration, pullups, drive strength, input enable/disable and input schmitt. + + node { + pinmux = ; + GENERIC_PINCONFIG; + }; + +Required properties: +- pinmux: integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in boot/dts/-pinfunc.h directly. + +Optional properties: +- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable, + bias-pull-down, bias-pull-up, input-enable, input-disable, output-low, + output-high, input-schmitt-enable, input-schmitt-disable + and drive-strength are valid. + + Some special pins have extra pull up strength, there are R0 and R1 pull-up + resistors available, but for user, it's only need to set R1R0 as 00, 01, + 10 or 11. So It needs config "mediatek,pull-up-adv" or + "mediatek,pull-down-adv" to support arguments for those special pins. + Valid arguments are from 0 to 3. + + mediatek,tdsel: An integer describing the steps for output level shifter + duty cycle when asserted (high pulse width adjustment). Valid arguments + are from 0 to 15. + mediatek,rdsel: An integer describing the steps for input level shifter + duty cycle when asserted (high pulse width adjustment). Valid arguments + are from 0 to 63. + + When config drive-strength, it can support some arguments, such as + MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h. + It can only support 2/4/6/8/10/12/14/16mA in mt8183. + For I2C pins, there are existing generic driving setup and the specific + driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA driving + adjustment in generic driving setup. But in specific driving setup, + they can support 0.125/0.25/0.5/1mA adjustment. If we enable specific + driving setup for I2C pins, the existing generic driving setup will be + disabled. For some special features, we need the I2C pins specific + driving setup. The specific driving setup is controlled by E1E0EN. + So we need add extra vendor driving preperty instead of + the generic driving property. + We can add "mediatek,drive-strength-adv = ;" to describe the specific + driving setup property. "XXX" means the value of E1E0EN. EN is 0 or 1. + It is used to enable or disable the specific driving setup. + E1E0 is used to describe the detail strength specification of the I2C pin. + When E1=0/E0=0, the strength is 0.125mA. + When E1=0/E0=1, the strength is 0.25mA. + When E1=1/E0=0, the strength is 0.5mA. + When E1=1/E0=1, the strength is 1mA. + So the valid arguments of "mediatek,drive-strength-adv" are from 0 to 7. + +Examples: + +#include "mt8183-pinfunc.h" + +... +{ + pio: pinctrl@10005000 { + compatible = "mediatek,mt8183-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11f20000 0 0x1000>, + <0 0x11e80000 0 0x1000>, + <0 0x11e70000 0 0x1000>, + <0 0x11e90000 0 0x1000>, + <0 0x11d30000 0 0x1000>, + <0 0x11d20000 0 0x1000>, + <0 0x11c50000 0 0x1000>, + <0 0x11f30000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg1", "iocfg2", + "iocfg3", "iocfg4", "iocfg5", + "iocfg6", "iocfg7", "iocfg8", + "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 192>; + interrupt-controller; + interrupts = ; + #interrupt-cells = <2>; + + i2c0_pins_a: i2c0 { + pins1 { + pinmux = , + ; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <7>; + }; + }; + + i2c1_pins_a: i2c1 { + pins { + pinmux = , + ; + mediatek,pull-down-adv = <2>; + mediatek,drive-strength-adv = <4>; + }; + }; + ... + }; +};