diff mbox series

[06/28] ARM: dts: sunxi: Switch to new GPIOs properties for i2c-gpio

Message ID 20190325135300.6440-6-maxime.ripard@bootlin.com (mailing list archive)
State New, archived
Headers show
Series [01/28] dt-bindings: arm: Remove the CPU compatible documentation | expand

Commit Message

Maxime Ripard March 25, 2019, 1:52 p.m. UTC
The i2c-gpio driver uses named gpios now and the array of GPIOs is
deprecated. Switch to the new binding.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 6 +++---
 arch/arm/boot/dts/sun6i-a31-colombus.dts | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

Comments

Chen-Yu Tsai March 25, 2019, 4:55 p.m. UTC | #1
On Mon, Mar 25, 2019 at 9:53 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> The i2c-gpio driver uses named gpios now and the array of GPIOs is
> deprecated. Switch to the new binding.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

Acked-by: Chen-Yu Tsai <wens@csie.org>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index 732873cbeedc..379d530ea2a7 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -58,13 +58,13 @@ 
 		/delete-property/stdout-path;
 	};
 
-	i2c_lcd: i2c-gpio {
+	i2c_lcd: i2c {
 		/* The lcd panel i2c interface is hooked up via gpios */
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c_lcd_pins>;
-		gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
-			<&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
+		sda-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+		scl-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
 		i2c-gpio,delay-us = <5>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index 0b7bedf85fb9..0e62b4042100 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -65,8 +65,8 @@ 
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c_lcd_pins>;
-		gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
-			<&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
+		sda-gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>; /* PA23 */
+		scl-gpios = <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24 */
 		i2c-gpio,delay-us = <5>;
 	};
 };