Message ID | 20190327001843.2420-2-megous@megous.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add bluetooth, gps and accelerometer to TBS A711 | expand |
Hi, On Wed, Mar 27, 2019 at 01:18:37AM +0100, megous@megous.com wrote: > From: Ondrej Jirman <megous@megous.com> > > TBS A711 tablet has a bcm20702a1 bluetooth chip (part of AP6210 WiFi/BT > module) connected to UART1. Add node for the blutooth chip. > > The driver needs brcm/BCM20702A1.hcd firmware file to run. > > Signed-off-by: Ondrej Jirman <megous@megous.com> Applied, thanks! Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 1e840ab5a541..6aae70c89a1e 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -406,7 +406,20 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm20702a1"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vbat>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + max-speed = <1500000>; + }; }; &usb_otg {