diff mbox series

[2/6] ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties

Message ID 20190416085746.11969-2-maxime.ripard@bootlin.com (mailing list archive)
State New, archived
Headers show
Series [1/6] ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry | expand

Commit Message

Maxime Ripard April 16, 2019, 8:57 a.m. UTC 
While the USB PHY Device Tree mandates that the name of the ID detect pin
should be usb0_id_det-gpios, a significant number of device tree use
usb0_id_det-gpio instead.

This was functional because the GPIO framework falls back to the gpio
suffix that is legacy, but we should fix this. Commit 2c515b0d05a9
("ARM: sunxi: Fix the USB PHY ID detect GPIO properties") was supposed to
fix this, but one fell through the cracks.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 7c1f379c3aed..a8e537fd4bd6 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -217,7 +217,7 @@ 
 };
 
 &usbphy {
-	usb0_id_det-gpio   = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
 	usb0_vbus-supply   = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;