diff mbox series

[v2,4/5] nvmem: imx-ocotp: Add i.MX8MM support

Message ID 20190419164808.23236-5-pure.logic@nexus-software.ie (mailing list archive)
State New, archived
Headers show
Series Add i.MX8MM support | expand

Commit Message

Bryan O'Donoghue April 19, 2019, 4:48 p.m. UTC 
This patch adds support to burn the fuses on the i.MX8MM.
https://www.nxp.com/webapp/Download?colCode=IMX8MMRM

The i.MX8MM is similar to i.MX6 processors in terms of addressing and clock
setup.

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
---
 drivers/nvmem/imx-ocotp.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 5b625d61e433..08006b07657b 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -453,6 +453,12 @@  static const struct ocotp_params imx8mq_params = {
 	.set_timing = imx_ocotp_set_imx7_timing,
 };
 
+static const struct ocotp_params imx8mm_params = {
+	.nregs = 60,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+};
+
 static const struct of_device_id imx_ocotp_dt_ids[] = {
 	{ .compatible = "fsl,imx6q-ocotp",  .data = &imx6q_params },
 	{ .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
@@ -463,6 +469,7 @@  static const struct of_device_id imx_ocotp_dt_ids[] = {
 	{ .compatible = "fsl,imx6sll-ocotp", .data = &imx6sll_params },
 	{ .compatible = "fsl,imx7ulp-ocotp", .data = &imx7ulp_params },
 	{ .compatible = "fsl,imx8mq-ocotp", .data = &imx8mq_params },
+	{ .compatible = "fsl,imx8mm-ocotp", .data = &imx8mm_params },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);