| Message ID | 20190420091239.3793-1-daniel.baluta@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: imx: Add mclk0 clock for SAI | expand |
On Sat, Apr 20, 2019 at 09:12:52AM +0000, Daniel Baluta wrote: > From: Shengjiu Wang <shengjiu.wang@nxp.com> > > SAI has 4 clock sources, which can be selected using MSEL > bit of SAI TCR2 register. I have a doubt at this statement. As far as I can understand, this MSEL is probably used by its internal clock MUX, so it's not really proving that SAI has 4 MCLK inputs. What I know is that SAI block itself only has 3 MCLK inputs as we defined in DT. It's just internally connects bus clock or MCLK1 to input0 of clock MUX's and connects MCLK[1-3] to input[1-3]. So adding an MCLK0 here doesn't sound a right way to me. Unless someone can justify for it, I think we should just fix it from driver side. Thanks Nicolin > > On imx6/7 mclk0 and mclk1 always point to the same clock > source. Anyhow, this is no longer true for imx8. > > For this reason, we need to add mclk0 and handle it > in a generic way in SAI driver. > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> > --- > arch/arm/boot/dts/imx6sx.dtsi | 6 ++++-- > arch/arm/boot/dts/imx6ul.dtsi | 9 ++++++--- > arch/arm/boot/dts/imx7s.dtsi | 9 ++++++--- > 3 files changed, 16 insertions(+), 8 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi > index b16a123990a2..682207b5d868 100644 > --- a/arch/arm/boot/dts/imx6sx.dtsi > +++ b/arch/arm/boot/dts/imx6sx.dtsi > @@ -1071,9 +1071,10 @@ > reg = <0x021d4000 0x4000>; > interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&clks IMX6SX_CLK_SAI1_IPG>, > + <&clks IMX6SX_CLK_SAI1>, > <&clks IMX6SX_CLK_SAI1>, > <&clks 0>, <&clks 0>; > - clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > dma-names = "rx", "tx"; > dmas = <&sdma 31 24 0>, <&sdma 32 24 0>; > status = "disabled"; > @@ -1090,9 +1091,10 @@ > reg = <0x021dc000 0x4000>; > interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&clks IMX6SX_CLK_SAI2_IPG>, > + <&clks IMX6SX_CLK_SAI2>, > <&clks IMX6SX_CLK_SAI2>, > <&clks 0>, <&clks 0>; > - clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > dma-names = "rx", "tx"; > dmas = <&sdma 33 24 0>, <&sdma 34 24 0>; > status = "disabled"; > diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi > index bbf010c73336..e9691306f557 100644 > --- a/arch/arm/boot/dts/imx6ul.dtsi > +++ b/arch/arm/boot/dts/imx6ul.dtsi > @@ -304,9 +304,10 @@ > reg = <0x02028000 0x4000>; > interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&clks IMX6UL_CLK_SAI1_IPG>, > + <&clks IMX6UL_CLK_SAI1>, > <&clks IMX6UL_CLK_SAI1>, > <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; > - clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > dmas = <&sdma 35 24 0>, > <&sdma 36 24 0>; > dma-names = "rx", "tx"; > @@ -319,9 +320,10 @@ > reg = <0x0202c000 0x4000>; > interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&clks IMX6UL_CLK_SAI2_IPG>, > + <&clks IMX6UL_CLK_SAI2>, > <&clks IMX6UL_CLK_SAI2>, > <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; > - clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > dmas = <&sdma 37 24 0>, > <&sdma 38 24 0>; > dma-names = "rx", "tx"; > @@ -334,9 +336,10 @@ > reg = <0x02030000 0x4000>; > interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&clks IMX6UL_CLK_SAI3_IPG>, > + <&clks IMX6UL_CLK_SAI3>, > <&clks IMX6UL_CLK_SAI3>, > <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; > - clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > dmas = <&sdma 39 24 0>, > <&sdma 40 24 0>; > dma-names = "rx", "tx"; > diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi > index 0b01109ac0a9..693b88e37799 100644 > --- a/arch/arm/boot/dts/imx7s.dtsi > +++ b/arch/arm/boot/dts/imx7s.dtsi > @@ -884,10 +884,11 @@ > reg = <0x308a0000 0x10000>; > interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&clks IMX7D_SAI1_IPG_CLK>, > + <&clks IMX7D_SAI1_ROOT_CLK>, > <&clks IMX7D_SAI1_ROOT_CLK>, > <&clks IMX7D_CLK_DUMMY>, > <&clks IMX7D_CLK_DUMMY>; > - clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > dma-names = "rx", "tx"; > dmas = <&sdma 8 24 0>, <&sdma 9 24 0>; > status = "disabled"; > @@ -899,10 +900,11 @@ > reg = <0x308b0000 0x10000>; > interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&clks IMX7D_SAI2_IPG_CLK>, > + <&clks IMX7D_SAI2_ROOT_CLK>, > <&clks IMX7D_SAI2_ROOT_CLK>, > <&clks IMX7D_CLK_DUMMY>, > <&clks IMX7D_CLK_DUMMY>; > - clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > dma-names = "rx", "tx"; > dmas = <&sdma 10 24 0>, <&sdma 11 24 0>; > status = "disabled"; > @@ -914,10 +916,11 @@ > reg = <0x308c0000 0x10000>; > interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&clks IMX7D_SAI3_IPG_CLK>, > + <&clks IMX7D_SAI3_ROOT_CLK>, > <&clks IMX7D_SAI3_ROOT_CLK>, > <&clks IMX7D_CLK_DUMMY>, > <&clks IMX7D_CLK_DUMMY>; > - clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > dma-names = "rx", "tx"; > dmas = <&sdma 12 24 0>, <&sdma 13 24 0>; > status = "disabled"; > -- > 2.17.1 >
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index b16a123990a2..682207b5d868 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -1071,9 +1071,10 @@ reg = <0x021d4000 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_SAI1_IPG>, + <&clks IMX6SX_CLK_SAI1>, <&clks IMX6SX_CLK_SAI1>, <&clks 0>, <&clks 0>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dma-names = "rx", "tx"; dmas = <&sdma 31 24 0>, <&sdma 32 24 0>; status = "disabled"; @@ -1090,9 +1091,10 @@ reg = <0x021dc000 0x4000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_SAI2_IPG>, + <&clks IMX6SX_CLK_SAI2>, <&clks IMX6SX_CLK_SAI2>, <&clks 0>, <&clks 0>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dma-names = "rx", "tx"; dmas = <&sdma 33 24 0>, <&sdma 34 24 0>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index bbf010c73336..e9691306f557 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -304,9 +304,10 @@ reg = <0x02028000 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_SAI1_IPG>, + <&clks IMX6UL_CLK_SAI1>, <&clks IMX6UL_CLK_SAI1>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&sdma 35 24 0>, <&sdma 36 24 0>; dma-names = "rx", "tx"; @@ -319,9 +320,10 @@ reg = <0x0202c000 0x4000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_SAI2_IPG>, + <&clks IMX6UL_CLK_SAI2>, <&clks IMX6UL_CLK_SAI2>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&sdma 37 24 0>, <&sdma 38 24 0>; dma-names = "rx", "tx"; @@ -334,9 +336,10 @@ reg = <0x02030000 0x4000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_SAI3_IPG>, + <&clks IMX6UL_CLK_SAI3>, <&clks IMX6UL_CLK_SAI3>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&sdma 39 24 0>, <&sdma 40 24 0>; dma-names = "rx", "tx"; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 0b01109ac0a9..693b88e37799 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -884,10 +884,11 @@ reg = <0x308a0000 0x10000>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_SAI1_IPG_CLK>, + <&clks IMX7D_SAI1_ROOT_CLK>, <&clks IMX7D_SAI1_ROOT_CLK>, <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dma-names = "rx", "tx"; dmas = <&sdma 8 24 0>, <&sdma 9 24 0>; status = "disabled"; @@ -899,10 +900,11 @@ reg = <0x308b0000 0x10000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_SAI2_IPG_CLK>, + <&clks IMX7D_SAI2_ROOT_CLK>, <&clks IMX7D_SAI2_ROOT_CLK>, <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dma-names = "rx", "tx"; dmas = <&sdma 10 24 0>, <&sdma 11 24 0>; status = "disabled"; @@ -914,10 +916,11 @@ reg = <0x308c0000 0x10000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_SAI3_IPG_CLK>, + <&clks IMX7D_SAI3_ROOT_CLK>, <&clks IMX7D_SAI3_ROOT_CLK>, <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dma-names = "rx", "tx"; dmas = <&sdma 12 24 0>, <&sdma 13 24 0>; status = "disabled";