diff mbox series

[v2,1/5] dt-bindings: regulator: add support for MT6392

Message ID 20190513161026.31308-2-fparent@baylibre.com (mailing list archive)
State New, archived
Headers show
Series mt6392: Add support for MediaTek MT6392 PMIC | expand

Commit Message

Fabien Parent May 13, 2019, 4:10 p.m. UTC 
Add binding documentation of the regulator for MT6392 SoCs.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---

v2:
	* Use 'pmic' as node name for the pmic.
	* Use 'regulators' as node name for the regulators
	* use dash instead of underscore for regulator's node names.

---
 .../bindings/regulator/mt6392-regulator.txt   | 220 ++++++++++++++++++
 1 file changed, 220 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/mt6392-regulator.txt

Comments

Rob Herring (Arm) May 14, 2019, 8:27 p.m. UTC | #1 
On Mon, 13 May 2019 18:10:22 +0200, Fabien Parent wrote:
> Add binding documentation of the regulator for MT6392 SoCs.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
> 
> v2:
> 	* Use 'pmic' as node name for the pmic.
> 	* Use 'regulators' as node name for the regulators
> 	* use dash instead of underscore for regulator's node names.
> 
> ---
>  .../bindings/regulator/mt6392-regulator.txt   | 220 ++++++++++++++++++
>  1 file changed, 220 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/mt6392-regulator.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/mt6392-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6392-regulator.txt
new file mode 100644
index 000000000000..d03c0707fabc
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6392-regulator.txt
@@ -0,0 +1,220 @@ 
+Mediatek MT6392 Regulator
+
+Required properties:
+- compatible: "mediatek,mt6392-regulator"
+- mt6392regulator: List of regulators provided by this controller. It is named
+  according to its regulator type, buck_<name> and ldo_<name>.
+  The definition for each of these nodes is defined using the standard binding
+  for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+  buck_vproc, buck_vsys, buck_vcore
+LDO:
+  ldo_vxo22, ldo_vaud22, ldo_vcama, ldo_vaud28, ldo_vadc18, ldo_vcn35,
+  ldo_vio28. ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2,
+  ldo_vcn18, ldo_vcamaf, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio, ldo_vm25,
+  ldo_vefuse
+
+Example:
+	pmic {
+		compatible = "mediatek,mt6392", "mediatek,mt6323";
+		mediatek,system-power-controller;
+
+		regulator {
+			compatible = "mediatek,mt6392-regulator";
+
+			mt6392_vproc_reg: buck-vproc {
+				regulator-name = "buck_vproc";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6392_vsys_reg: buck-vsys {
+				regulator-name = "buck_vsys";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <2987500>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6392_vcore_reg: buck-vcore {
+				regulator-name = "buck_vcore";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6392_vxo22_reg: ldo-vxo22 {
+				regulator-name = "ldo_vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <110>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6392_vaud22_reg: ldo-vaud22 {
+				regulator-name = "ldo_vaud22";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6392_vcama_reg: ldo-vcama {
+				regulator-name = "ldo_vcama";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6392_vaud28_reg: ldo-vaud28 {
+				regulator-name = "ldo_vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6392_vadc18_reg: ldo-vadc18 {
+				regulator-name = "ldo_vadc18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6392_vcn35_reg: ldo-vcn35 {
+				regulator-name = "ldo_vcn35";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6392_vio28_reg: ldo-vio28 {
+				regulator-name = "ldo_vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6392_vusb_reg: ldo-vusb {
+				regulator-name = "ldo_vusb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6392_vmc_reg: ldo-vmc {
+				regulator-name = "ldo_vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-boot-on;
+			};
+
+			mt6392_vmch_reg: ldo-vmch {
+				regulator-name = "ldo_vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-boot-on;
+			};
+
+			mt6392_vemc3v3_reg: ldo-vemc3v3 {
+				regulator-name = "ldo_vemc3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-boot-on;
+			};
+
+			mt6392_vgp1_reg: ldo-vgp1 {
+				regulator-name = "ldo_vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6392_vgp2_reg: ldo-vgp2 {
+				regulator-name = "ldo_vgp2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6392_vcn18_reg: ldo-vcn18 {
+				regulator-name = "ldo_vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6392_vcamaf_reg: ldo-vcamaf {
+				regulator-name = "ldo_vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6392_vm_reg: ldo-vm {
+				regulator-name = "ldo_vm";
+				regulator-min-microvolt = <1240000>;
+				regulator-max-microvolt = <1390000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6392_vio18_reg: ldo-vio18 {
+				regulator-name = "ldo_vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6392_vcamd_reg: ldo-vcamd {
+				regulator-name = "ldo_vcamd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6392_vcamio_reg: ldo-vcamio {
+				regulator-name = "ldo_vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6392_vm25_reg: ldo-vm25 {
+				regulator-name = "ldo_vm25";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6392_vefuse_reg: ldo-vefuse {
+				regulator-name = "ldo_vefuse";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+		};
+	};