diff mbox series

[v6,1/4] dt-bindings: media: add Amlogic Video Decoder Bindings

Message ID 20190514135612.30822-2-mjourdan@baylibre.com (mailing list archive)
State New, archived
Headers show
Series Add Amlogic video decoder driver | expand

Commit Message

Maxime Jourdan May 14, 2019, 1:56 p.m. UTC 
Add documentation for the meson vdec dts node.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
---
 .../bindings/media/amlogic,vdec.txt           | 71 +++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/amlogic,vdec.txt

Comments

Martin Blumenstingl May 14, 2019, 6:46 p.m. UTC | #1 
Hi Maxime,

On Tue, May 14, 2019 at 3:56 PM Maxime Jourdan <mjourdan@baylibre.com> wrote:
>
> Add documentation for the meson vdec dts node.
thank you for working on this!

> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[...]
> +Required properties:
> +- compatible: value should be different for each SoC family as :
> +       - GXBB (S905) : "amlogic,gxbb-vdec"
> +       - GXL (S905X, S905D) : "amlogic,gxl-vdec"
> +       - GXM (S912) : "amlogic,gxm-vdec"
> +- reg: base address and size of he following memory-mapped regions :
> +       - dos
> +       - esparser
> +- reg-names: should contain the names of the previous memory regions
> +- interrupts: should contain the following IRQs:
> +       - vdec
> +       - esparser
> +- interrupt-names: should contain the names of the previous interrupts
Maxime already mentioned in the RFC version that there may be more
interrupts in the future. I'm fine with adding the missing ones on
demand

> +- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node
my goal is to remove this property at some point and replace it with
references to the power-domains.
however, we don't have a power-domain driver for this yet (it's
somewhere on my TODO-list - it involves splitting the current
meson-gx-pwrc-vpu into two separate drivers, so we need to do it
carefully so we don't break HDMI support)


Regards
Martin
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/amlogic,vdec.txt b/Documentation/devicetree/bindings/media/amlogic,vdec.txt
new file mode 100644
index 000000000000..aabdd01bcf32
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,vdec.txt
@@ -0,0 +1,71 @@ 
+Amlogic Video Decoder
+================================
+
+The video decoding IP lies within the DOS memory region,
+except for the hardware bitstream parser that makes use of an undocumented
+region.
+
+It makes use of the following blocks:
+
+- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks
+then feed from this VIFIFO.
+- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1.
+- VDEC_HEVC can decode HEVC and VP9.
+
+Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run
+concurrently.
+
+Device Tree Bindings:
+---------------------
+
+VDEC: Video Decoder
+--------------------------
+
+Required properties:
+- compatible: value should be different for each SoC family as :
+	- GXBB (S905) : "amlogic,gxbb-vdec"
+	- GXL (S905X, S905D) : "amlogic,gxl-vdec"
+	- GXM (S912) : "amlogic,gxm-vdec"
+- reg: base address and size of he following memory-mapped regions :
+	- dos
+	- esparser
+- reg-names: should contain the names of the previous memory regions
+- interrupts: should contain the following IRQs:
+	- vdec
+	- esparser
+- interrupt-names: should contain the names of the previous interrupts
+- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node
+- amlogic,canvas: should point to a canvas provider node
+- clocks: should contain the following clocks :
+	- dos_parser
+	- dos
+	- vdec_1
+	- vdec_hevc
+- clock-names: should contain the names of the previous clocks
+- resets: should contain the parser reset
+- reset-names: should be "esparser"
+
+Example:
+
+vdec: video-decoder@c8820000 {
+	compatible = "amlogic,gxbb-vdec";
+	reg = <0x0 0xc8820000 0x0 0x10000>,
+	      <0x0 0xc110a580 0x0 0xe4>;
+	reg-names = "dos", "esparser";
+
+	interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+		     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+	interrupt-names = "vdec", "esparser";
+
+	amlogic,ao-sysctrl = <&sysctrl_AO>;
+	amlogic,canvas = <&canvas>;
+
+	clocks = <&clkc CLKID_DOS_PARSER>,
+		 <&clkc CLKID_DOS>,
+		 <&clkc CLKID_VDEC_1>,
+		 <&clkc CLKID_VDEC_HEVC>;
+	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+
+	resets = <&reset RESET_PARSER>;
+	reset-names = "esparser";
+};