diff mbox series

[v3,1/2] arm64: dts: imx8mm: Add SAI nodes

Message ID 20190515144210.25596-2-daniel.baluta@nxp.com (mailing list archive)
State New, archived
Headers show
Series Enable wm8524 codec on i.MX8MM EVK | expand

Commit Message

Daniel Baluta May 15, 2019, 2:42 p.m. UTC 
i.MX8MM has 5 SAI instances with the following base
addresses according to RM.

SAI1 base address: 3001_0000h
SAI2 base address: 3002_0000h
SAI3 base address: 3003_0000h
SAI5 base address: 3005_0000h
SAI6 base address: 3006_0000h

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 66 +++++++++++++++++++++++
 1 file changed, 66 insertions(+)

Comments

Fabio Estevam May 16, 2019, 6:33 p.m. UTC | #1 
Hi Daniel,

On Wed, May 15, 2019 at 11:42 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:
>
> i.MX8MM has 5 SAI instances with the following base
> addresses according to RM.
>
> SAI1 base address: 3001_0000h
> SAI2 base address: 3002_0000h
> SAI3 base address: 3003_0000h
> SAI5 base address: 3005_0000h
> SAI6 base address: 3006_0000h

No SAI4?

I know the RM does not show the SAI4 in the memory map, but the clock
driver does show a SAI4 clock gate.

So it seems we have a contradiction in the reference manual. Could you
please double check with the internal folks?
Fabio Estevam May 20, 2019, 7:33 p.m. UTC | #2 
On Thu, May 16, 2019 at 3:33 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Daniel,
>
> On Wed, May 15, 2019 at 11:42 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:
> >
> > i.MX8MM has 5 SAI instances with the following base
> > addresses according to RM.
> >
> > SAI1 base address: 3001_0000h
> > SAI2 base address: 3002_0000h
> > SAI3 base address: 3003_0000h
> > SAI5 base address: 3005_0000h
> > SAI6 base address: 3006_0000h
>
> No SAI4?
>
> I know the RM does not show the SAI4 in the memory map, but the clock
> driver does show a SAI4 clock gate.
>
> So it seems we have a contradiction in the reference manual. Could you
> please double check with the internal folks?

Despite the SAI4 confusion, the current patch correctly describe the
SAI interfaces as per the Reference Manual, so:

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Shawn Guo May 31, 2019, 7:27 a.m. UTC | #3 
On Wed, May 15, 2019 at 02:42:28PM +0000, Daniel Baluta wrote:
> i.MX8MM has 5 SAI instances with the following base
> addresses according to RM.
> 
> SAI1 base address: 3001_0000h
> SAI2 base address: 3002_0000h
> SAI3 base address: 3003_0000h
> SAI5 base address: 3005_0000h
> SAI6 base address: 3006_0000h
> 
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 6b407a94c06e..52abe2d03f31 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -201,6 +201,72 @@ 
 			#size-cells = <1>;
 			ranges;
 
+			sai1: sai@30010000 {
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30010000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+					 <&clk IMX8MM_CLK_SAI1_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai2: sai@30020000 {
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30020000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+					<&clk IMX8MM_CLK_SAI2_ROOT>,
+					<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@30030000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30030000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+					 <&clk IMX8MM_CLK_SAI3_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@30050000 {
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30050000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+					 <&clk IMX8MM_CLK_SAI5_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai6: sai@30060000 {
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30060000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+					 <&clk IMX8MM_CLK_SAI6_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			gpio1: gpio@30200000 {
 				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 				reg = <0x30200000 0x10000>;