| Message ID | 20190517123846.3708-11-vidyas@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Tegra194 PCIe support | expand |
On Fri, May 17, 2019 at 06:08:41PM +0530, Vidya Sagar wrote: > Add support for Tegra194 P2U (PIPE to UPHY) module block which is a glue > module instantiated one for each PCIe lane between Synopsys DesignWare core > based PCIe IP and Universal PHY block. > > Signed-off-by: Vidya Sagar <vidyas@nvidia.com> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > Changes since [v6]: > * None > > Changes since [v5]: > * Added Sob > * Changed node name from "p2u@xxxxxxxx" to "phy@xxxxxxxx" > > Changes since [v4]: > * None > > Changes since [v3]: > * None > > Changes since [v2]: > * Changed node label to reflect new format that includes either 'hsio' or > 'nvhs' in its name to reflect which UPHY brick they belong to > > Changes since [v1]: > * This is a new patch in v2 series > > .../bindings/phy/phy-tegra194-p2u.txt | 28 +++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt Acked-by: Thierry Reding <treding@nvidia.com>
diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt new file mode 100644 index 000000000000..d23ff90baad5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt @@ -0,0 +1,28 @@ +NVIDIA Tegra194 P2U binding + +Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High +Speed) each interfacing with 12 and 8 P2U instances respectively. +A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE +interface and PHY of HSIO/NVHS bricks. Each P2U instance represents one PCIe +lane. + +Required properties: +- compatible: For Tegra19x, must contain "nvidia,tegra194-p2u". +- reg: Should be the physical address space and length of respective each P2U + instance. +- reg-names: Must include the entry "ctl". + +Required properties for PHY port node: +- #phy-cells: Defined by generic PHY bindings. Must be 0. + +Refer to phy/phy-bindings.txt for the generic PHY binding properties. + +Example: + +p2u_hsio_0: phy@3e10000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e10000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; +};