| Message ID | 20190517123846.3708-14-vidyas@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Tegra194 PCIe support | expand |
On Fri, May 17, 2019 at 06:08:44PM +0530, Vidya Sagar wrote: > Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface > with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module. > For each PCIe lane of a controller, there is a P2U unit instantiated at > hardware level. This driver provides support for the programming required > for each P2U that is going to be used for a PCIe controller. > > Signed-off-by: Vidya Sagar <vidyas@nvidia.com> > --- > Changes since [v6]: > * None > > Changes since [v5]: > * Addressed review comments from Thierry > > Changes since [v4]: > * None > > Changes since [v3]: > * Rebased on top of linux-next top of the tree > > Changes since [v2]: > * Replaced spaces with tabs in Kconfig file > * Sorted header file inclusion alphabetically > > Changes since [v1]: > * Added COMPILE_TEST in Kconfig > * Removed empty phy_ops implementations > * Modified code according to DT documentation file modifications > > drivers/phy/tegra/Kconfig | 7 ++ > drivers/phy/tegra/Makefile | 1 + > drivers/phy/tegra/pcie-p2u-tegra194.c | 109 ++++++++++++++++++++++++++ > 3 files changed, 117 insertions(+) > create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c > > diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig > index a3b1de953fb7..06d423fa85b4 100644 > --- a/drivers/phy/tegra/Kconfig > +++ b/drivers/phy/tegra/Kconfig > @@ -6,3 +6,10 @@ config PHY_TEGRA_XUSB > > To compile this driver as a module, choose M here: the module will > be called phy-tegra-xusb. > + > +config PHY_TEGRA194_PCIE_P2U > + tristate "NVIDIA Tegra P2U PHY Driver" The Kconfig symbol and driver are named inconsistently. That's not inherently wrong, but I think it unnecessarily complicates things. Why not just do something like: config PHY_TEGRA194_P2U and name the driver... > + depends on ARCH_TEGRA || COMPILE_TEST > + select GENERIC_PHY > + help > + Enable this to support the P2U (PIPE to UPHY) that is part of Tegra 19x SOCs. > diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile > index a93cd9a499b2..1aaca794f40c 100644 > --- a/drivers/phy/tegra/Makefile > +++ b/drivers/phy/tegra/Makefile > @@ -5,3 +5,4 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o > phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o > phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o > phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o > +obj-$(CONFIG_PHY_TEGRA194_PCIE_P2U) += pcie-p2u-tegra194.o ... phy-tegra194-p2u here? Or perhaps even leave away the 194 and make it just phy-tegra-p2u. That would make it consistent with the phy-tegra-xusb driver. Looks good otherwise. Thierry > diff --git a/drivers/phy/tegra/pcie-p2u-tegra194.c b/drivers/phy/tegra/pcie-p2u-tegra194.c > new file mode 100644 > index 000000000000..fae2afe1a1aa > --- /dev/null > +++ b/drivers/phy/tegra/pcie-p2u-tegra194.c > @@ -0,0 +1,109 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * P2U (PIPE to UPHY) driver for Tegra T194 SoC > + * > + * Copyright (C) 2019 NVIDIA Corporation. > + * > + * Author: Vidya Sagar <vidyas@nvidia.com> > + */ > + > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_platform.h> > +#include <linux/phy/phy.h> > + > +#define P2U_PERIODIC_EQ_CTRL_GEN3 0xc0 > +#define P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN BIT(0) > +#define P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN BIT(1) > +#define P2U_PERIODIC_EQ_CTRL_GEN4 0xc4 > +#define P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN BIT(1) > + > +#define P2U_RX_DEBOUNCE_TIME 0xa4 > +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK 0xffff > +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL 160 > + > +struct tegra_p2u { > + void __iomem *base; > +}; > + > +static int tegra_p2u_power_on(struct phy *x) > +{ > + struct tegra_p2u *phy = phy_get_drvdata(x); > + u32 val; > + > + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN3); > + val &= ~P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN; > + val |= P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN; > + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN3); > + > + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN4); > + val |= P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN; > + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN4); > + > + val = readl(phy->base + P2U_RX_DEBOUNCE_TIME); > + val &= ~P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK; > + val |= P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL; > + writel(val, phy->base + P2U_RX_DEBOUNCE_TIME); > + > + return 0; > +} > + > +static const struct phy_ops ops = { > + .power_on = tegra_p2u_power_on, > + .owner = THIS_MODULE, > +}; > + > +static int tegra_p2u_probe(struct platform_device *pdev) > +{ > + struct phy_provider *phy_provider; > + struct device *dev = &pdev->dev; > + struct phy *generic_phy; > + struct tegra_p2u *phy; > + struct resource *res; > + > + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); > + if (!phy) > + return -ENOMEM; > + > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctl"); > + phy->base = devm_ioremap_resource(dev, res); > + if (IS_ERR(phy->base)) > + return PTR_ERR_OR_ZERO(phy->base); > + > + platform_set_drvdata(pdev, phy); > + > + generic_phy = devm_phy_create(dev, NULL, &ops); > + if (IS_ERR(generic_phy)) > + return PTR_ERR_OR_ZERO(generic_phy); > + > + phy_set_drvdata(generic_phy, phy); > + > + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + if (IS_ERR(phy_provider)) > + return PTR_ERR_OR_ZERO(phy_provider); > + > + return 0; > +} > + > +static const struct of_device_id tegra_p2u_id_table[] = { > + { > + .compatible = "nvidia,tegra194-p2u", > + }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, tegra_p2u_id_table); > + > +static struct platform_driver tegra_p2u_driver = { > + .probe = tegra_p2u_probe, > + .driver = { > + .name = "tegra194-p2u", > + .of_match_table = tegra_p2u_id_table, > + }, > +}; > +module_platform_driver(tegra_p2u_driver); > + > +MODULE_AUTHOR("Vidya Sagar <vidyas@nvidia.com>"); > +MODULE_DESCRIPTION("NVIDIA Tegra PIPE2UPHY PHY driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.17.1 >
On Fri, May 17, 2019 at 06:08:44PM +0530, Vidya Sagar wrote: > Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface > with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module. > For each PCIe lane of a controller, there is a P2U unit instantiated at > hardware level. This driver provides support for the programming required > for each P2U that is going to be used for a PCIe controller. > > Signed-off-by: Vidya Sagar <vidyas@nvidia.com> > --- > Changes since [v6]: > * None > > Changes since [v5]: > * Addressed review comments from Thierry > > Changes since [v4]: > * None > > Changes since [v3]: > * Rebased on top of linux-next top of the tree > > Changes since [v2]: > * Replaced spaces with tabs in Kconfig file > * Sorted header file inclusion alphabetically > > Changes since [v1]: > * Added COMPILE_TEST in Kconfig > * Removed empty phy_ops implementations > * Modified code according to DT documentation file modifications > > drivers/phy/tegra/Kconfig | 7 ++ > drivers/phy/tegra/Makefile | 1 + > drivers/phy/tegra/pcie-p2u-tegra194.c | 109 ++++++++++++++++++++++++++ > 3 files changed, 117 insertions(+) > create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c > > diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig > index a3b1de953fb7..06d423fa85b4 100644 > --- a/drivers/phy/tegra/Kconfig > +++ b/drivers/phy/tegra/Kconfig > @@ -6,3 +6,10 @@ config PHY_TEGRA_XUSB > > To compile this driver as a module, choose M here: the module will > be called phy-tegra-xusb. > + > +config PHY_TEGRA194_PCIE_P2U > + tristate "NVIDIA Tegra P2U PHY Driver" One more thing: perhaps make this description consistent with the driver description in the source file. Thierry
On 5/21/2019 4:30 PM, Thierry Reding wrote: > On Fri, May 17, 2019 at 06:08:44PM +0530, Vidya Sagar wrote: >> Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface >> with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module. >> For each PCIe lane of a controller, there is a P2U unit instantiated at >> hardware level. This driver provides support for the programming required >> for each P2U that is going to be used for a PCIe controller. >> >> Signed-off-by: Vidya Sagar <vidyas@nvidia.com> >> --- >> Changes since [v6]: >> * None >> >> Changes since [v5]: >> * Addressed review comments from Thierry >> >> Changes since [v4]: >> * None >> >> Changes since [v3]: >> * Rebased on top of linux-next top of the tree >> >> Changes since [v2]: >> * Replaced spaces with tabs in Kconfig file >> * Sorted header file inclusion alphabetically >> >> Changes since [v1]: >> * Added COMPILE_TEST in Kconfig >> * Removed empty phy_ops implementations >> * Modified code according to DT documentation file modifications >> >> drivers/phy/tegra/Kconfig | 7 ++ >> drivers/phy/tegra/Makefile | 1 + >> drivers/phy/tegra/pcie-p2u-tegra194.c | 109 ++++++++++++++++++++++++++ >> 3 files changed, 117 insertions(+) >> create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c >> >> diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig >> index a3b1de953fb7..06d423fa85b4 100644 >> --- a/drivers/phy/tegra/Kconfig >> +++ b/drivers/phy/tegra/Kconfig >> @@ -6,3 +6,10 @@ config PHY_TEGRA_XUSB >> >> To compile this driver as a module, choose M here: the module will >> be called phy-tegra-xusb. >> + >> +config PHY_TEGRA194_PCIE_P2U >> + tristate "NVIDIA Tegra P2U PHY Driver" > > The Kconfig symbol and driver are named inconsistently. That's not > inherently wrong, but I think it unnecessarily complicates things. Why > not just do something like: > > config PHY_TEGRA194_P2U > > and name the driver... Ok. Done. > >> + depends on ARCH_TEGRA || COMPILE_TEST >> + select GENERIC_PHY >> + help >> + Enable this to support the P2U (PIPE to UPHY) that is part of Tegra 19x SOCs. >> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile >> index a93cd9a499b2..1aaca794f40c 100644 >> --- a/drivers/phy/tegra/Makefile >> +++ b/drivers/phy/tegra/Makefile >> @@ -5,3 +5,4 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o >> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o >> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o >> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o >> +obj-$(CONFIG_PHY_TEGRA194_PCIE_P2U) += pcie-p2u-tegra194.o > > ... phy-tegra194-p2u here? Or perhaps even leave away the 194 and make > it just phy-tegra-p2u. That would make it consistent with the > phy-tegra-xusb driver. I'll go with phy-tegra194-p2u here as P2U is present only starting from T194. > > Looks good otherwise. > > Thierry > >> diff --git a/drivers/phy/tegra/pcie-p2u-tegra194.c b/drivers/phy/tegra/pcie-p2u-tegra194.c >> new file mode 100644 >> index 000000000000..fae2afe1a1aa >> --- /dev/null >> +++ b/drivers/phy/tegra/pcie-p2u-tegra194.c >> @@ -0,0 +1,109 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * P2U (PIPE to UPHY) driver for Tegra T194 SoC >> + * >> + * Copyright (C) 2019 NVIDIA Corporation. >> + * >> + * Author: Vidya Sagar <vidyas@nvidia.com> >> + */ >> + >> +#include <linux/err.h> >> +#include <linux/io.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/of_platform.h> >> +#include <linux/phy/phy.h> >> + >> +#define P2U_PERIODIC_EQ_CTRL_GEN3 0xc0 >> +#define P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN BIT(0) >> +#define P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN BIT(1) >> +#define P2U_PERIODIC_EQ_CTRL_GEN4 0xc4 >> +#define P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN BIT(1) >> + >> +#define P2U_RX_DEBOUNCE_TIME 0xa4 >> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK 0xffff >> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL 160 >> + >> +struct tegra_p2u { >> + void __iomem *base; >> +}; >> + >> +static int tegra_p2u_power_on(struct phy *x) >> +{ >> + struct tegra_p2u *phy = phy_get_drvdata(x); >> + u32 val; >> + >> + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN3); >> + val &= ~P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN; >> + val |= P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN; >> + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN3); >> + >> + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN4); >> + val |= P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN; >> + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN4); >> + >> + val = readl(phy->base + P2U_RX_DEBOUNCE_TIME); >> + val &= ~P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK; >> + val |= P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL; >> + writel(val, phy->base + P2U_RX_DEBOUNCE_TIME); >> + >> + return 0; >> +} >> + >> +static const struct phy_ops ops = { >> + .power_on = tegra_p2u_power_on, >> + .owner = THIS_MODULE, >> +}; >> + >> +static int tegra_p2u_probe(struct platform_device *pdev) >> +{ >> + struct phy_provider *phy_provider; >> + struct device *dev = &pdev->dev; >> + struct phy *generic_phy; >> + struct tegra_p2u *phy; >> + struct resource *res; >> + >> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); >> + if (!phy) >> + return -ENOMEM; >> + >> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctl"); >> + phy->base = devm_ioremap_resource(dev, res); >> + if (IS_ERR(phy->base)) >> + return PTR_ERR_OR_ZERO(phy->base); >> + >> + platform_set_drvdata(pdev, phy); >> + >> + generic_phy = devm_phy_create(dev, NULL, &ops); >> + if (IS_ERR(generic_phy)) >> + return PTR_ERR_OR_ZERO(generic_phy); >> + >> + phy_set_drvdata(generic_phy, phy); >> + >> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); >> + if (IS_ERR(phy_provider)) >> + return PTR_ERR_OR_ZERO(phy_provider); >> + >> + return 0; >> +} >> + >> +static const struct of_device_id tegra_p2u_id_table[] = { >> + { >> + .compatible = "nvidia,tegra194-p2u", >> + }, >> + {} >> +}; >> +MODULE_DEVICE_TABLE(of, tegra_p2u_id_table); >> + >> +static struct platform_driver tegra_p2u_driver = { >> + .probe = tegra_p2u_probe, >> + .driver = { >> + .name = "tegra194-p2u", >> + .of_match_table = tegra_p2u_id_table, >> + }, >> +}; >> +module_platform_driver(tegra_p2u_driver); >> + >> +MODULE_AUTHOR("Vidya Sagar <vidyas@nvidia.com>"); >> +MODULE_DESCRIPTION("NVIDIA Tegra PIPE2UPHY PHY driver"); >> +MODULE_LICENSE("GPL v2"); >> -- >> 2.17.1 >>
On 5/21/2019 4:30 PM, Thierry Reding wrote: > On Fri, May 17, 2019 at 06:08:44PM +0530, Vidya Sagar wrote: >> Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface >> with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module. >> For each PCIe lane of a controller, there is a P2U unit instantiated at >> hardware level. This driver provides support for the programming required >> for each P2U that is going to be used for a PCIe controller. >> >> Signed-off-by: Vidya Sagar <vidyas@nvidia.com> >> --- >> Changes since [v6]: >> * None >> >> Changes since [v5]: >> * Addressed review comments from Thierry >> >> Changes since [v4]: >> * None >> >> Changes since [v3]: >> * Rebased on top of linux-next top of the tree >> >> Changes since [v2]: >> * Replaced spaces with tabs in Kconfig file >> * Sorted header file inclusion alphabetically >> >> Changes since [v1]: >> * Added COMPILE_TEST in Kconfig >> * Removed empty phy_ops implementations >> * Modified code according to DT documentation file modifications >> >> drivers/phy/tegra/Kconfig | 7 ++ >> drivers/phy/tegra/Makefile | 1 + >> drivers/phy/tegra/pcie-p2u-tegra194.c | 109 ++++++++++++++++++++++++++ >> 3 files changed, 117 insertions(+) >> create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c >> >> diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig >> index a3b1de953fb7..06d423fa85b4 100644 >> --- a/drivers/phy/tegra/Kconfig >> +++ b/drivers/phy/tegra/Kconfig >> @@ -6,3 +6,10 @@ config PHY_TEGRA_XUSB >> >> To compile this driver as a module, choose M here: the module will >> be called phy-tegra-xusb. >> + >> +config PHY_TEGRA194_PCIE_P2U >> + tristate "NVIDIA Tegra P2U PHY Driver" > > One more thing: perhaps make this description consistent with the driver > description in the source file. Done. > > Thierry >
diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig index a3b1de953fb7..06d423fa85b4 100644 --- a/drivers/phy/tegra/Kconfig +++ b/drivers/phy/tegra/Kconfig @@ -6,3 +6,10 @@ config PHY_TEGRA_XUSB To compile this driver as a module, choose M here: the module will be called phy-tegra-xusb. + +config PHY_TEGRA194_PCIE_P2U + tristate "NVIDIA Tegra P2U PHY Driver" + depends on ARCH_TEGRA || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support the P2U (PIPE to UPHY) that is part of Tegra 19x SOCs. diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile index a93cd9a499b2..1aaca794f40c 100644 --- a/drivers/phy/tegra/Makefile +++ b/drivers/phy/tegra/Makefile @@ -5,3 +5,4 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o +obj-$(CONFIG_PHY_TEGRA194_PCIE_P2U) += pcie-p2u-tegra194.o diff --git a/drivers/phy/tegra/pcie-p2u-tegra194.c b/drivers/phy/tegra/pcie-p2u-tegra194.c new file mode 100644 index 000000000000..fae2afe1a1aa --- /dev/null +++ b/drivers/phy/tegra/pcie-p2u-tegra194.c @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * P2U (PIPE to UPHY) driver for Tegra T194 SoC + * + * Copyright (C) 2019 NVIDIA Corporation. + * + * Author: Vidya Sagar <vidyas@nvidia.com> + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> + +#define P2U_PERIODIC_EQ_CTRL_GEN3 0xc0 +#define P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN BIT(0) +#define P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN BIT(1) +#define P2U_PERIODIC_EQ_CTRL_GEN4 0xc4 +#define P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN BIT(1) + +#define P2U_RX_DEBOUNCE_TIME 0xa4 +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK 0xffff +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL 160 + +struct tegra_p2u { + void __iomem *base; +}; + +static int tegra_p2u_power_on(struct phy *x) +{ + struct tegra_p2u *phy = phy_get_drvdata(x); + u32 val; + + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN3); + val &= ~P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN; + val |= P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN; + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN3); + + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN4); + val |= P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN; + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN4); + + val = readl(phy->base + P2U_RX_DEBOUNCE_TIME); + val &= ~P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK; + val |= P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL; + writel(val, phy->base + P2U_RX_DEBOUNCE_TIME); + + return 0; +} + +static const struct phy_ops ops = { + .power_on = tegra_p2u_power_on, + .owner = THIS_MODULE, +}; + +static int tegra_p2u_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct phy *generic_phy; + struct tegra_p2u *phy; + struct resource *res; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctl"); + phy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->base)) + return PTR_ERR_OR_ZERO(phy->base); + + platform_set_drvdata(pdev, phy); + + generic_phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(generic_phy)) + return PTR_ERR_OR_ZERO(generic_phy); + + phy_set_drvdata(generic_phy, phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR_OR_ZERO(phy_provider); + + return 0; +} + +static const struct of_device_id tegra_p2u_id_table[] = { + { + .compatible = "nvidia,tegra194-p2u", + }, + {} +}; +MODULE_DEVICE_TABLE(of, tegra_p2u_id_table); + +static struct platform_driver tegra_p2u_driver = { + .probe = tegra_p2u_probe, + .driver = { + .name = "tegra194-p2u", + .of_match_table = tegra_p2u_id_table, + }, +}; +module_platform_driver(tegra_p2u_driver); + +MODULE_AUTHOR("Vidya Sagar <vidyas@nvidia.com>"); +MODULE_DESCRIPTION("NVIDIA Tegra PIPE2UPHY PHY driver"); +MODULE_LICENSE("GPL v2");
Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module. For each PCIe lane of a controller, there is a P2U unit instantiated at hardware level. This driver provides support for the programming required for each P2U that is going to be used for a PCIe controller. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> --- Changes since [v6]: * None Changes since [v5]: * Addressed review comments from Thierry Changes since [v4]: * None Changes since [v3]: * Rebased on top of linux-next top of the tree Changes since [v2]: * Replaced spaces with tabs in Kconfig file * Sorted header file inclusion alphabetically Changes since [v1]: * Added COMPILE_TEST in Kconfig * Removed empty phy_ops implementations * Modified code according to DT documentation file modifications drivers/phy/tegra/Kconfig | 7 ++ drivers/phy/tegra/Makefile | 1 + drivers/phy/tegra/pcie-p2u-tegra194.c | 109 ++++++++++++++++++++++++++ 3 files changed, 117 insertions(+) create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c