Message ID | 20190522071227.31488-2-andrew.smirnov@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/3] ARM: dts: imx6: rdu2: Add node for UCS1002 USB charger chip | expand |
> RDU2 production units come with resistor connecting WP pin to > correpsonding GPIO DNPed for both SD card slots. Drop any WP related > configuration and mark both slots with "disable-wp". > > Reported-by: Chris Healy <cphealy@gmail.com> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: Lucas Stach <l.stach@pengutronix.de> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > --- > arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 6 ++---- > 1 file changed, 2 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi > index 977d923e35df..5484e4b87975 100644 > --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi > @@ -625,7 +625,7 @@ > pinctrl-0 = <&pinctrl_usdhc2>; Reviewed-by: Chris Healy <cphealy@gmail.com>
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 977d923e35df..5484e4b87975 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -625,7 +625,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + disable-wp; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; @@ -638,7 +638,7 @@ pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + disable-wp; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; @@ -1054,7 +1054,6 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040 >; }; @@ -1067,7 +1066,6 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040 >;
RDU2 production units come with resistor connecting WP pin to correpsonding GPIO DNPed for both SD card slots. Drop any WP related configuration and mark both slots with "disable-wp". Reported-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)