| Message ID | 20190522161921.20750-4-nm@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: Initial support Texas Instrument's J721E Platform | expand |
Hi Nishanth, Tero, On 5/22/19 11:19 AM, Nishanth Menon wrote: > The J721E SoC belongs to the K3 Multicore SoC architecture platform, > providing advanced system integration to enable lower system costs > of automotive applications such as infotainment, cluster, premium > Audio, Gateway, industrial and a range of broad market applications. > This SoC is designed around reducing the system cost by eliminating > the need of an external system MCU and is targeted towards ASIL-B/C > certification/requirements in addition to allowing complex software > and system use-cases. > > Some highlights of this SoC are: > * Dual Cortex-A72s in a single cluster, three clusters of lockstep > capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), > C7x floating point Vector DSP, Two C66x floating point DSPs. > * 3D GPU PowerVR Rogue 8XE GE8430 > * Vision Processing Accelerator (VPAC) with image signal processor and Depth > and Motion Processing Accelerator (DMPAC) > * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual > PRUs and dual RTUs > * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and > up to two DPI interfaces. > * Integrated Ethernet switch supporting up to a total of 8 external ports in > addition to legacy Ethernet switch of up to 2 ports. > * System MMU (SMMU) Version 3.0 and advanced virtualisation > capabilities. > * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, > 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, > I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. > * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL > management. > * Configurable L3 Cache and IO-coherent architecture with high data throughput > capable distributed DMA architecture under NAVSS > * Centralized System Controller for Security, Power, and Resource > Management (DMSC) > > See J721E Technical Reference Manual (SPRUIL1, May 2019) > for further details: http://www.ti.com/lit/pdf/spruil1 > > Signed-off-by: Nishanth Menon <nm@ti.com> > --- > arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 202 ++++++++++++++++++ > .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 72 +++++++ > arch/arm64/boot/dts/ti/k3-j721e.dtsi | 176 +++++++++++++++ > 3 files changed, 450 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j721e.dtsi > > diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi > new file mode 100644 > index 000000000000..d42912044a5d > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi > @@ -0,0 +1,202 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for J721E SoC Family Main Domain peripherals > + * > + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ > + */ > + > +&cbass_main { > + msmc_ram: sram@70000000 { > + compatible = "mmio-sram"; > + reg = <0x0 0x70000000 0x0 0x800000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0x70000000 0x800000>; > + > + atf-sram@0 { > + reg = <0x0 0x20000>; > + }; > + }; > + > + gic500: interrupt-controller@1800000 { > + compatible = "arm,gic-v3"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ > + <0x00 0x01900000 0x00 0x100000>; /* GICR */ > + > + /* vcpumntirq: virtual CPU interface maintenance interrupt */ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + > + gic_its: gic-its@18200000 { > + compatible = "arm,gic-v3-its"; > + reg = <0x00 0x01820000 0x00 0x10000>; > + socionext,synquacer-pre-its = <0x1000000 0x400000>; > + msi-controller; > + #msi-cells = <1>; > + }; > + }; > + > + smmu0: smmu@36600000 { > + compatible = "arm,smmu-v3"; > + reg = <0x0 0x36600000 0x0 0x100000>; > + interrupt-parent = <&gic500>; > + interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "eventq", "gerror"; > + #iommu-cells = <1>; > + }; > + > + secure_proxy_main: mailbox@32c00000 { > + compatible = "ti,am654-secure-proxy"; > + #mbox-cells = <1>; > + reg-names = "target_data", "rt", "scfg"; > + reg = <0x00 0x32c00000 0x00 0x100000>, > + <0x00 0x32400000 0x00 0x100000>, > + <0x00 0x32800000 0x00 0x100000>; > + interrupt-names = "rx_011"; > + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + main_pmx0: pinmux@11c000 { > + compatible = "pinctrl-single"; > + /* Proxy 0 addressing */ > + reg = <0x0 0x11c000 0x0 0x2b4>; > + #pinctrl-cells = <1>; > + pinctrl-single,register-width = <32>; > + pinctrl-single,function-mask = <0xffffffff>; > + }; > + > + main_uart0: serial@2800000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02800000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 146>; > + clocks = <&k3_clks 146 0>; > + clock-names = "fclk"; > + }; > + > + main_uart1: serial@2810000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02810000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 278>; > + clocks = <&k3_clks 278 0>; > + clock-names = "fclk"; > + }; > + > + main_uart2: serial@2820000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02820000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 279>; > + clocks = <&k3_clks 279 0>; > + clock-names = "fclk"; > + }; > + > + main_uart3: serial@2830000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02830000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 280>; > + clocks = <&k3_clks 280 0>; > + clock-names = "fclk"; > + }; > + > + main_uart4: serial@2840000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02840000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 281>; > + clocks = <&k3_clks 281 0>; > + clock-names = "fclk"; > + }; > + > + main_uart5: serial@2850000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02850000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 282>; > + clocks = <&k3_clks 282 0>; > + clock-names = "fclk"; > + }; > + > + main_uart6: serial@2860000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02860000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 283>; > + clocks = <&k3_clks 283 0>; > + clock-names = "fclk"; > + }; > + > + main_uart7: serial@2870000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02870000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 284>; > + clocks = <&k3_clks 284 0>; > + clock-names = "fclk"; > + }; > + > + main_uart8: serial@2880000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02880000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 285>; > + clocks = <&k3_clks 285 0>; > + clock-names = "fclk"; > + }; > + > + main_uart9: serial@2890000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02890000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 286>; > + clocks = <&k3_clks 286 0>; > + clock-names = "fclk"; > + }; > +}; > diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi > new file mode 100644 > index 000000000000..b72e033fa159 > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi > @@ -0,0 +1,72 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals > + * > + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ > + */ > + > +&cbass_mcu_wakeup { > + dmsc: dmsc@44083000 { > + compatible = "ti,k2g-sci"; > + ti,host-id = <12>; > + > + mbox-names = "rx", "tx"; > + > + mboxes= <&secure_proxy_main 11>, > + <&secure_proxy_main 13>; > + > + reg-names = "debug_messages"; > + reg = <0x00 0x44083000 0x0 0x1000>; > + > + k3_pds: power-controller { > + compatible = "ti,sci-pm-domain"; > + #power-domain-cells = <1>; > + }; > + > + k3_clks: clocks { > + compatible = "ti,k2g-sci-clk"; > + #clock-cells = <2>; > + ti,scan-clocks-from-dt; > + }; > + > + k3_reset: reset-controller { > + compatible = "ti,sci-reset"; > + #reset-cells = <2>; > + }; > + }; > + > + wkup_pmx0: pinmux@4301c000 { > + compatible = "pinctrl-single"; > + /* Proxy 0 addressing */ > + reg = <0x00 0x4301c000 0x00 0x178>; > + #pinctrl-cells = <1>; > + pinctrl-single,register-width = <32>; > + pinctrl-single,function-mask = <0xffffffff>; > + }; > + > + wkup_uart0: serial@42300000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x42300000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 287>; > + clocks = <&k3_clks 287 0>; > + clock-names = "fclk"; > + }; > + > + mcu_uart0: serial@40a00000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x40a00000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <96000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 149>; > + clocks = <&k3_clks 149 0>; > + clock-names = "fclk"; > + }; > +}; > diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi > new file mode 100644 > index 000000000000..e7c366c98ce1 > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi > @@ -0,0 +1,176 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for J721E SoC Family > + * > + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ > + */ > + > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/pinctrl/k3.h> > + > +/ { > + model = "Texas Instruments K3 J721E SoC"; > + compatible = "ti,j721e"; > + interrupt-parent = <&gic500>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + aliases { > + serial0 = &wkup_uart0; > + serial1 = &mcu_uart0; > + serial2 = &main_uart0; > + serial3 = &main_uart1; > + serial4 = &main_uart2; > + serial5 = &main_uart3; > + serial6 = &main_uart4; > + serial7 = &main_uart5; > + serial8 = &main_uart6; > + serial9 = &main_uart7; > + serial10 = &main_uart8; > + serial11 = &main_uart9; > + }; > + > + chosen { }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + cpu-map { > + cluster0: cluster0 { > + core0 { > + cpu = <&cpu0>; > + }; > + > + core1 { > + cpu = <&cpu1>; > + }; > + }; > + > + }; > + > + cpu0: cpu@0 { > + compatible = "arm,cortex-a72"; > + reg = <0x000>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0xC000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&L2_0>; > + }; > + > + cpu1: cpu@1 { > + compatible = "arm,cortex-a72"; > + reg = <0x001>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0xC000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&L2_0>; > + }; > + }; > + > + L2_0: l2-cache0 { > + compatible = "cache"; > + cache-level = <2>; > + cache-size = <0x100000>; > + cache-line-size = <64>; > + cache-sets = <2048>; > + next-level-cache = <&msmc_l3>; > + }; > + > + msmc_l3: l3-cache0 { > + compatible = "cache"; > + cache-level = <3>; > + }; > + > + firmware { > + optee { > + compatible = "linaro,optee-tz"; > + method = "smc"; > + }; > + > + psci: psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + }; > + > + a72_timer0: timer-cl0-cpu0 { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ > + }; > + > + pmu: pmu { > + compatible = "arm,armv8-pmuv3"; > + /* Recommendation from GIC500 TRM Table A.3 */ > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + cbass_main: interconnect@100000 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ > + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ > + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ > + <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ > + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ > + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ > + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ > + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ > + <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */ > + <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */ > + <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */ > + <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */ > + /* MCUSS_WKUP Range */ > + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, > + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, > + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, > + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, > + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, > + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, > + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, > + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, > + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, > + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, > + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, > + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, minor nit, can we have this MSMC RAM range line moved to before the MCUSS_WKUP comment since it doesn't belong to the MCUSS range. Perhaps can be fixed up while applying the patch. Other than that, everything looks good. Reviewed-by: Suman Anna <s-anna@ti.com> regards Suman > + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, > + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; > + > + cbass_mcu_wakeup: interconnect@28380000 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ > + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */ > + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ > + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ > + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ > + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */ > + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */ > + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ > + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ > + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ > + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ > + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ > + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ > + }; > + }; > +}; > + > +/* Now include the peripherals for each bus segments */ > +#include "k3-j721e-main.dtsi" > +#include "k3-j721e-mcu-wakeup.dtsi" >
On 22/05/2019 19:19, Nishanth Menon wrote: > The J721E SoC belongs to the K3 Multicore SoC architecture platform, > providing advanced system integration to enable lower system costs > of automotive applications such as infotainment, cluster, premium > Audio, Gateway, industrial and a range of broad market applications. > This SoC is designed around reducing the system cost by eliminating > the need of an external system MCU and is targeted towards ASIL-B/C > certification/requirements in addition to allowing complex software > and system use-cases. > > Some highlights of this SoC are: > * Dual Cortex-A72s in a single cluster, three clusters of lockstep > capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), > C7x floating point Vector DSP, Two C66x floating point DSPs. > * 3D GPU PowerVR Rogue 8XE GE8430 > * Vision Processing Accelerator (VPAC) with image signal processor and Depth > and Motion Processing Accelerator (DMPAC) > * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual > PRUs and dual RTUs > * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and > up to two DPI interfaces. > * Integrated Ethernet switch supporting up to a total of 8 external ports in > addition to legacy Ethernet switch of up to 2 ports. > * System MMU (SMMU) Version 3.0 and advanced virtualisation > capabilities. > * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, > 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, > I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. > * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL > management. > * Configurable L3 Cache and IO-coherent architecture with high data throughput > capable distributed DMA architecture under NAVSS > * Centralized System Controller for Security, Power, and Resource > Management (DMSC) > > See J721E Technical Reference Manual (SPRUIL1, May 2019) > for further details: http://www.ti.com/lit/pdf/spruil1 > > Signed-off-by: Nishanth Menon <nm@ti.com> > --- > arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 202 ++++++++++++++++++ > .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 72 +++++++ > arch/arm64/boot/dts/ti/k3-j721e.dtsi | 176 +++++++++++++++ > 3 files changed, 450 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j721e.dtsi > > diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi > new file mode 100644 > index 000000000000..d42912044a5d > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi <snip> > +&cbass_mcu_wakeup { > + dmsc: dmsc@44083000 { > + compatible = "ti,k2g-sci"; > + ti,host-id = <12>; > + > + mbox-names = "rx", "tx"; > + > + mboxes= <&secure_proxy_main 11>, > + <&secure_proxy_main 13>; > + > + reg-names = "debug_messages"; > + reg = <0x00 0x44083000 0x0 0x1000>; > + > + k3_pds: power-controller { > + compatible = "ti,sci-pm-domain"; > + #power-domain-cells = <1>; > + }; > + > + k3_clks: clocks { > + compatible = "ti,k2g-sci-clk"; > + #clock-cells = <2>; > + ti,scan-clocks-from-dt; ti,scan-clocks-from-dt is an invalid DT property, it was NAK:ed a while back. The same functionality is now going to be used by default, so the property is not needed anyway. Fixed this locally by dropping the property. -Tero -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On 07/06/2019 23:58, Suman Anna wrote: > Hi Nishanth, Tero, > > On 5/22/19 11:19 AM, Nishanth Menon wrote: >> The J721E SoC belongs to the K3 Multicore SoC architecture platform, >> providing advanced system integration to enable lower system costs >> of automotive applications such as infotainment, cluster, premium >> Audio, Gateway, industrial and a range of broad market applications. >> This SoC is designed around reducing the system cost by eliminating >> the need of an external system MCU and is targeted towards ASIL-B/C >> certification/requirements in addition to allowing complex software >> and system use-cases. >> >> Some highlights of this SoC are: >> * Dual Cortex-A72s in a single cluster, three clusters of lockstep >> capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), >> C7x floating point Vector DSP, Two C66x floating point DSPs. >> * 3D GPU PowerVR Rogue 8XE GE8430 >> * Vision Processing Accelerator (VPAC) with image signal processor and Depth >> and Motion Processing Accelerator (DMPAC) >> * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual >> PRUs and dual RTUs >> * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and >> up to two DPI interfaces. >> * Integrated Ethernet switch supporting up to a total of 8 external ports in >> addition to legacy Ethernet switch of up to 2 ports. >> * System MMU (SMMU) Version 3.0 and advanced virtualisation >> capabilities. >> * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, >> 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, >> I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. >> * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL >> management. >> * Configurable L3 Cache and IO-coherent architecture with high data throughput >> capable distributed DMA architecture under NAVSS >> * Centralized System Controller for Security, Power, and Resource >> Management (DMSC) >> >> See J721E Technical Reference Manual (SPRUIL1, May 2019) >> for further details: http://www.ti.com/lit/pdf/spruil1 >> >> Signed-off-by: Nishanth Menon <nm@ti.com> >> --- >> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 202 ++++++++++++++++++ >> .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 72 +++++++ >> arch/arm64/boot/dts/ti/k3-j721e.dtsi | 176 +++++++++++++++ >> 3 files changed, 450 insertions(+) >> create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi >> create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi >> create mode 100644 arch/arm64/boot/dts/ti/k3-j721e.dtsi >> <snip> >> + /* MCUSS_WKUP Range */ >> + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, >> + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, >> + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, >> + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, >> + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, >> + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, >> + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, >> + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, >> + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, >> + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, >> + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, >> + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, > > minor nit, can we have this MSMC RAM range line moved to before the > MCUSS_WKUP comment since it doesn't belong to the MCUSS range. Perhaps > can be fixed up while applying the patch. > > Other than that, everything looks good. > > Reviewed-by: Suman Anna <s-anna@ti.com> Fixed this issue also locally, thanks. -Tero -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi new file mode 100644 index 000000000000..d42912044a5d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family Main Domain peripherals + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_main { + msmc_ram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x0 0x70000000 0x0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x70000000 0x800000>; + + atf-sram@0 { + reg = <0x0 0x20000>; + }; + }; + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01900000 0x00 0x100000>; /* GICR */ + + /* vcpumntirq: virtual CPU interface maintenance interrupt */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: gic-its@18200000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + smmu0: smmu@36600000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0x36600000 0x0 0x100000>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror"; + #iommu-cells = <1>; + }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + main_pmx0: pinmux@11c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x0 0x11c000 0x0 0x2b4>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 146>; + clocks = <&k3_clks 146 0>; + clock-names = "fclk"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 278>; + clocks = <&k3_clks 278 0>; + clock-names = "fclk"; + }; + + main_uart2: serial@2820000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 279>; + clocks = <&k3_clks 279 0>; + clock-names = "fclk"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 280>; + clocks = <&k3_clks 280 0>; + clock-names = "fclk"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 281>; + clocks = <&k3_clks 281 0>; + clock-names = "fclk"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 282>; + clocks = <&k3_clks 282 0>; + clock-names = "fclk"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 283>; + clocks = <&k3_clks 283 0>; + clock-names = "fclk"; + }; + + main_uart7: serial@2870000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02870000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 284>; + clocks = <&k3_clks 284 0>; + clock-names = "fclk"; + }; + + main_uart8: serial@2880000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02880000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 285>; + clocks = <&k3_clks 285 0>; + clock-names = "fclk"; + }; + + main_uart9: serial@2890000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02890000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 286>; + clocks = <&k3_clks 286 0>; + clock-names = "fclk"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi new file mode 100644 index 000000000000..b72e033fa159 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_mcu_wakeup { + dmsc: dmsc@44083000 { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + + reg-names = "debug_messages"; + reg = <0x00 0x44083000 0x0 0x1000>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + ti,scan-clocks-from-dt; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + wkup_pmx0: pinmux@4301c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c000 0x00 0x178>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_uart0: serial@42300000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x42300000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 287>; + clocks = <&k3_clks 287 0>; + clock-names = "fclk"; + }; + + mcu_uart0: serial@40a00000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x40a00000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <96000000>; + current-speed = <115200>; + power-domains = <&k3_pds 149>; + clocks = <&k3_clks 149 0>; + clock-names = "fclk"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi new file mode 100644 index 000000000000..e7c366c98ce1 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -0,0 +1,176 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3.h> + +/ { + model = "Texas Instruments K3 J721E SoC"; + compatible = "ti,j721e"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + serial5 = &main_uart3; + serial6 = &main_uart4; + serial7 = &main_uart5; + serial8 = &main_uart6; + serial9 = &main_uart7; + serial10 = &main_uart8; + serial11 = &main_uart9; + }; + + chosen { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a72"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a72"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a72_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + /* Recommendation from GIC500 TRM Table A.3 */ + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: interconnect@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ + <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ + <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */ + <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */ + <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */ + <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */ + /* MCUSS_WKUP Range */ + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + + cbass_mcu_wakeup: interconnect@28380000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */ + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-j721e-main.dtsi" +#include "k3-j721e-mcu-wakeup.dtsi"
The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Signed-off-by: Nishanth Menon <nm@ti.com> --- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 202 ++++++++++++++++++ .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 72 +++++++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 176 +++++++++++++++ 3 files changed, 450 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721e.dtsi