| Message ID | 20190601070718.26971-3-pbrobinson@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] arm: imx6sx: udoo: Use the correct style for SPDX License Identifier | expand |
On Sat, Jun 1, 2019 at 4:07 AM Peter Robinson <pbrobinson@gmail.com> wrote: > > The i2c2 bus has a external plug which enables the easy connection of external > "bricks" with sensors of various kinds, while i2c4 on the Extended/Full boards > has a pair of on board motion sensors, accelerometer and magnetometer on one chip > and gyroscope on another so it makes sense to enable these i2c buses for use. > Tested on UDOO Neo Full. > > Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts index c6005cd284be..04a9f8780b8c 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts @@ -16,3 +16,7 @@ reg = <0x80000000 0x40000000>; }; }; + +&i2c4 { /* Onboard Motion sensors */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts index ad8b8a663a70..3cc6b0231ff6 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts @@ -31,3 +31,7 @@ }; }; }; + +&i2c4 { /* Onboard Motion sensors */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index 386707c1bfe0..26373e3f3afd 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -188,6 +188,20 @@ }; }; +&i2c2 { /* Brick snap in sensors connector */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c4 { /* Onboard Motion sensors */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clock-frequency = <100000>; + status = "disabled"; +}; + &iomuxc { pinctrl_bt_reg: btreggrp { fsl,pins = @@ -219,6 +233,18 @@ <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1>, + <MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = + <MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>, + <MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>; + }; + pinctrl_uart1: uart1grp { fsl,pins = <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>,
The i2c2 bus has a external plug which enables the easy connection of external "bricks" with sensors of various kinds, while i2c4 on the Extended/Full boards has a pair of on board motion sensors, accelerometer and magnetometer on one chip and gyroscope on another so it makes sense to enable these i2c buses for use. Tested on UDOO Neo Full. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> -- v2: move i2c-4 core to imx6sx-udoo-neo.dtsi and just enable it on specific boards --- .../arm/boot/dts/imx6sx-udoo-neo-extended.dts | 4 +++ arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 4 +++ arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 26 +++++++++++++++++++ 3 files changed, 34 insertions(+)