@@ -23,3 +23,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-rom7720-a1.dtb
new file mode 100644
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/dts-v1/;
+
+#include "imx8qm.dtsi"
+
+/ {
+ model = "Advantech iMX8QM Qseven series";
+ compatible = "fsl,imx8qm";
+
+ board {
+ compatible = "proc-board";
+ board-type = "ROM-7720_A1";
+ board-cpu = "iMX8QM";
+ };
+
+ chosen {
+ bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
+ stdout-path = &dma_lpuart0;
+ };
+
+ cpus {
+ /delete-node/ cpu-map;
+ /delete-node/ cpu@100;
+ /delete-node/ cpu@101;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x40000000>;
+ };
+
+ reg_usdhc2_vmmc: usdhc2_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "sw-3p3-sd1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ off-on-delay = <3000>;
+ enable-active-high;
+ };
+};
+
+&dma_lpuart0 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-txid";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ fsl,rgmii_rxc_dly;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ at803x,eee-disabled;
+ at803x,vddio-1p8v;
+ };
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ bus-width = <4>;
+ cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_hog_1: hoggrp-1 {
+ fsl,pins = <
+ IMX8QM_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000048
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0
+ IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020
+ IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
+ IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000060
+ IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000060
+ IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000060
+ IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000060
+ IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000060
+ IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000060
+ IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000060
+ IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000060
+ IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000060
+ IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000060
+ IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000060
+ IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000060
+ >;
+ };
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020
+ IMX8QM_UART0_TX_DMA_UART0_TX 0x06000020
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040
+ IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020
+ IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020
+ IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020
+ IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020
+ IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020
+ IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020
+ IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020
+ IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020
+ IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020
+ IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000040
+ IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040
+ IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020
+ IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020
+ IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020
+ IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020
+ IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020
+ IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020
+ IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020
+ IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020
+ IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020
+ IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000040
+ IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ fsl,pins = <
+ IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21 0x00000021
+ IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021
+ IMX8QM_USDHC1_RESET_B_LSIO_GPIO4_IO07 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041
+ IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021
+ IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021
+ IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021
+ IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021
+ IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021
+ IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040
+ IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020
+ IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020
+ IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020
+ IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020
+ IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020
+ IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040
+ IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020
+ IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020
+ IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020
+ IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020
+ IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020
+ IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020
+ >;
+ };
+};
Add basic dts support for a Advantech iMX8QM Qseven Board Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8qm-rom7720-a1.dts | 221 ++++++++++++++++++ 2 files changed, 222 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts