diff mbox series

net: stmmac: make "snps,reset-delays-us" optional again

Message ID 20190701224225.19701-1-martin.blumenstingl@googlemail.com (mailing list archive)
State New, archived
Headers show
Series net: stmmac: make "snps,reset-delays-us" optional again | expand

Commit Message

Martin Blumenstingl July 1, 2019, 10:42 p.m. UTC
Commit 760f1dc2958022 ("net: stmmac: add sanity check to
device_property_read_u32_array call") introduced error checking of the
device_property_read_u32_array() call in stmmac_mdio_reset().
This results in the following error when the "snps,reset-delays-us"
property is not defined in devicetree:
  invalid property snps,reset-delays-us

This sanity check made sense until commit 84ce4d0f9f55b4 ("net: stmmac:
initialize the reset delay array") ensured that there are fallback
values for the reset delay if the "snps,reset-delays-us" property is
absent. That was at the cost of making that property mandatory though.

Drop the sanity check for device_property_read_u32_array() and thus make
the "snps,reset-delays-us" property optional again (avoiding the error
message while loading the stmmac driver with a .dtb where the property
is absent).

Fixes: 760f1dc2958022 ("net: stmmac: add sanity check to device_property_read_u32_array call")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
This is a fix for a patch in net-next and should either go into net-next
or 5.3-rcX.


 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

Comments

David Miller July 2, 2019, 10:23 p.m. UTC | #1
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Tue,  2 Jul 2019 00:42:25 +0200

> Commit 760f1dc2958022 ("net: stmmac: add sanity check to
> device_property_read_u32_array call") introduced error checking of the
> device_property_read_u32_array() call in stmmac_mdio_reset().
> This results in the following error when the "snps,reset-delays-us"
> property is not defined in devicetree:
>   invalid property snps,reset-delays-us
> 
> This sanity check made sense until commit 84ce4d0f9f55b4 ("net: stmmac:
> initialize the reset delay array") ensured that there are fallback
> values for the reset delay if the "snps,reset-delays-us" property is
> absent. That was at the cost of making that property mandatory though.
> 
> Drop the sanity check for device_property_read_u32_array() and thus make
> the "snps,reset-delays-us" property optional again (avoiding the error
> message while loading the stmmac driver with a .dtb where the property
> is absent).
> 
> Fixes: 760f1dc2958022 ("net: stmmac: add sanity check to device_property_read_u32_array call")
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> This is a fix for a patch in net-next and should either go into net-next
> or 5.3-rcX.

Ok, applied to net-next.
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index f8061e34122f..18cadf0b0d66 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -242,7 +242,6 @@  int stmmac_mdio_reset(struct mii_bus *bus)
 	if (priv->device->of_node) {
 		struct gpio_desc *reset_gpio;
 		u32 delays[3] = { 0, 0, 0 };
-		int ret;
 
 		reset_gpio = devm_gpiod_get_optional(priv->device,
 						     "snps,reset",
@@ -250,15 +249,9 @@  int stmmac_mdio_reset(struct mii_bus *bus)
 		if (IS_ERR(reset_gpio))
 			return PTR_ERR(reset_gpio);
 
-		ret = device_property_read_u32_array(priv->device,
-						     "snps,reset-delays-us",
-						     delays,
-						     ARRAY_SIZE(delays));
-		if (ret) {
-			dev_err(ndev->dev.parent,
-				"invalid property snps,reset-delays-us\n");
-			return -EINVAL;
-		}
+		device_property_read_u32_array(priv->device,
+					       "snps,reset-delays-us",
+					       delays, ARRAY_SIZE(delays));
 
 		if (delays[0])
 			msleep(DIV_ROUND_UP(delays[0], 1000));