diff mbox series

[2/2] ARM: dts: meson8b: odroidc1: use the MAC address stored in the eFuse

Message ID 20190727194647.15355-3-martin.blumenstingl@googlemail.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: meson8b: persistent MAC address for Odroid-C1 | expand

Commit Message

Martin Blumenstingl July 27, 2019, 7:46 p.m. UTC 
Odroid-C1 (and probably other Meson8b boards which are based on the
reference designs) uses the MAC address stored in eFuse at offset 0x1b4.

Assign the nvmem cell to the Ethernet controller as "mac-address" so the
MAC address which is stored in the eFuse is assigned to the Ethernet
controller. This means the MAC address will be consistent across
reboots.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 90f66dc45115..df428a40a748 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -200,6 +200,9 @@ 
 	phy-handle = <&eth_phy>;
 	amlogic,tx-delay-ns = <4>;
 
+	nvmem-cells = <&ethernet_mac_address>;
+	nvmem-cell-names = "mac-address";
+
 	mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;