diff mbox series

[09/22] ARM: dts: imx6qdl-colibri: add phy to fec

Message ID 20190730144649.19022-10-dev@pschenker.ch (mailing list archive)
State New, archived
Headers show
Series This patchset holds some common changes that were never upstreamed. | expand

Commit Message

Philippe Schenker July 30, 2019, 2:46 p.m. UTC 
From: Philippe Schenker <philippe.schenker@toradex.com>

Add the phy-node and mdio bus to the fec-node, represented as is on
hardware.
This commit includes micrel,led-mode that is set to the default
value, prepared for someone who wants to change this.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

 arch/arm/boot/dts/imx6qdl-colibri.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 1beac22266ed..019dda6b88ad 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -140,7 +140,18 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			micrel,led-mode = <0>;
+		};
+	};
 };
 
 &hdmi {