diff mbox series

[02/22] ARM: dts: imx7-colibri: disable HS400

Message ID 20190730144649.19022-3-dev@pschenker.ch (mailing list archive)
State New, archived
Headers show
Series This patchset holds some common changes that were never upstreamed. | expand

Commit Message

Philippe Schenker July 30, 2019, 2:46 p.m. UTC 
From: Stefan Agner <stefan.agner@toradex.com>

Force HS200 by masking bit 63 of the SDHCI capability register.
The i.MX ESDHC driver uses SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400. With
that the stack checks bit 63 to descide whether HS400 is available.
Using sdhci-caps-mask allows to mask bit 63. The stack then selects
HS200 as operating mode.

This prevents rare communication errors with minimal effect on
performance:
	sdhci-esdhc-imx 30b60000.usdhc: warning! HS400 strobe DLL
		status REF not lock!

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

 arch/arm/boot/dts/imx7-colibri.dtsi | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index f1c1971f2160..f7c9ce5bed47 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -325,6 +325,7 @@ 
 	vmmc-supply = <&reg_module_3v3>;
 	vqmmc-supply = <&reg_DCDC3>;
 	non-removable;
+	sdhci-caps-mask = <0x80000000 0x0>;
 };
 
 &iomuxc {