@@ -17,23 +17,23 @@
/*
* Instantiate the CP110
*/
-#define CP110_NAME cp0
-#define CP110_BASE f2000000
-#define CP110_PCIE_IO_BASE 0xf9000000
-#define CP110_PCIE_MEM_BASE 0xf6000000
-#define CP110_PCIE0_BASE f2600000
-#define CP110_PCIE1_BASE f2620000
-#define CP110_PCIE2_BASE f2640000
+#define CP11X_NAME cp0
+#define CP11X_BASE f2000000
+#define CP11X_PCIE_IO_BASE 0xf9000000
+#define CP11X_PCIE_MEM_BASE 0xf6000000
+#define CP11X_PCIE0_BASE f2600000
+#define CP11X_PCIE1_BASE f2620000
+#define CP11X_PCIE2_BASE f2640000
#include "armada-cp110.dtsi"
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIE_IO_BASE
+#undef CP11X_PCIE_MEM_BASE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
&cp0_gpio1 {
status = "okay";
@@ -19,44 +19,44 @@
/*
* Instantiate the master CP110
*/
-#define CP110_NAME cp0
-#define CP110_BASE f2000000
-#define CP110_PCIE_IO_BASE 0xf9000000
-#define CP110_PCIE_MEM_BASE 0xf6000000
-#define CP110_PCIE0_BASE f2600000
-#define CP110_PCIE1_BASE f2620000
-#define CP110_PCIE2_BASE f2640000
+#define CP11X_NAME cp0
+#define CP11X_BASE f2000000
+#define CP11X_PCIE_IO_BASE 0xf9000000
+#define CP11X_PCIE_MEM_BASE 0xf6000000
+#define CP11X_PCIE0_BASE f2600000
+#define CP11X_PCIE1_BASE f2620000
+#define CP11X_PCIE2_BASE f2640000
#include "armada-cp110.dtsi"
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIE_IO_BASE
+#undef CP11X_PCIE_MEM_BASE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
/*
* Instantiate the slave CP110
*/
-#define CP110_NAME cp1
-#define CP110_BASE f4000000
-#define CP110_PCIE_IO_BASE 0xfd000000
-#define CP110_PCIE_MEM_BASE 0xfa000000
-#define CP110_PCIE0_BASE f4600000
-#define CP110_PCIE1_BASE f4620000
-#define CP110_PCIE2_BASE f4640000
+#define CP11X_NAME cp1
+#define CP11X_BASE f4000000
+#define CP11X_PCIE_IO_BASE 0xfd000000
+#define CP11X_PCIE_MEM_BASE 0xfa000000
+#define CP11X_PCIE0_BASE f4600000
+#define CP11X_PCIE1_BASE f4620000
+#define CP11X_PCIE2_BASE f4640000
#include "armada-cp110.dtsi"
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIE_IO_BASE
+#undef CP11X_PCIE_MEM_BASE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
/* The 80x0 has two CP blocks, but uses only one block from each. */
&cp1_gpio1 {
@@ -6,6 +6,6 @@
/* Common definitions used by Armada 7K/8K DTs */
#define PASTER(x, y) x ## y
#define EVALUATOR(x, y) PASTER(x, y)
-#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
-#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name))
+#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name))
+#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name))
#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
@@ -1,579 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
*
* Device Tree file for Marvell Armada CP110.
*/
-#include <dt-bindings/interrupt-controller/mvebu-icu.h>
-#include <dt-bindings/thermal/thermal.h>
+#define CP11X_TYPE cp110
-#include "armada-common.dtsi"
+#include "armada-cp11x.dtsi"
-#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000))
-#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000))
-#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
-
-/ {
- /*
- * The contents of the node are defined below, in order to
- * save one indentation level
- */
- CP110_NAME: CP110_NAME { };
-
- /*
- * CPs only have one sensor in the thermal IC.
- *
- * The cooling maps are empty as there are no cooling devices.
- */
- thermal-zones {
- CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) {
- polling-delay-passive = <0>; /* Interrupt driven */
- polling-delay = <0>; /* Interrupt driven */
-
- thermal-sensors = <&CP110_LABEL(thermal) 0>;
-
- trips {
- CP110_LABEL(crit): crit {
- temperature = <100000>; /* mC degrees */
- hysteresis = <2000>; /* mC degrees */
- type = "critical";
- };
- };
-
- cooling-maps { };
- };
- };
-};
-
-&CP110_NAME {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&CP110_LABEL(icu_nsr)>;
- ranges;
-
- config-space@CP110_BASE {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
-
- CP110_LABEL(ethernet): ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
- <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
- <&CP110_LABEL(clk) 1 18>;
- clock-names = "pp_clk", "gop_clk",
- "mg_clk", "mg_core_clk", "axi_clk";
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- status = "disabled";
- dma-coherent;
-
- CP110_LABEL(eth0): eth0 {
- interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
- <43 IRQ_TYPE_LEVEL_HIGH>,
- <47 IRQ_TYPE_LEVEL_HIGH>,
- <51 IRQ_TYPE_LEVEL_HIGH>,
- <55 IRQ_TYPE_LEVEL_HIGH>,
- <59 IRQ_TYPE_LEVEL_HIGH>,
- <63 IRQ_TYPE_LEVEL_HIGH>,
- <67 IRQ_TYPE_LEVEL_HIGH>,
- <71 IRQ_TYPE_LEVEL_HIGH>,
- <129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hif0", "hif1", "hif2",
- "hif3", "hif4", "hif5", "hif6", "hif7",
- "hif8", "link";
- port-id = <0>;
- gop-port-id = <0>;
- status = "disabled";
- };
-
- CP110_LABEL(eth1): eth1 {
- interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
- <44 IRQ_TYPE_LEVEL_HIGH>,
- <48 IRQ_TYPE_LEVEL_HIGH>,
- <52 IRQ_TYPE_LEVEL_HIGH>,
- <56 IRQ_TYPE_LEVEL_HIGH>,
- <60 IRQ_TYPE_LEVEL_HIGH>,
- <64 IRQ_TYPE_LEVEL_HIGH>,
- <68 IRQ_TYPE_LEVEL_HIGH>,
- <72 IRQ_TYPE_LEVEL_HIGH>,
- <128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hif0", "hif1", "hif2",
- "hif3", "hif4", "hif5", "hif6", "hif7",
- "hif8", "link";
- port-id = <1>;
- gop-port-id = <2>;
- status = "disabled";
- };
-
- CP110_LABEL(eth2): eth2 {
- interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
- <45 IRQ_TYPE_LEVEL_HIGH>,
- <49 IRQ_TYPE_LEVEL_HIGH>,
- <53 IRQ_TYPE_LEVEL_HIGH>,
- <57 IRQ_TYPE_LEVEL_HIGH>,
- <61 IRQ_TYPE_LEVEL_HIGH>,
- <65 IRQ_TYPE_LEVEL_HIGH>,
- <69 IRQ_TYPE_LEVEL_HIGH>,
- <73 IRQ_TYPE_LEVEL_HIGH>,
- <127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hif0", "hif1", "hif2",
- "hif3", "hif4", "hif5", "hif6", "hif7",
- "hif8", "link";
- port-id = <2>;
- gop-port-id = <3>;
- status = "disabled";
- };
- };
-
- CP110_LABEL(comphy): phy@120000 {
- compatible = "marvell,comphy-cp110";
- reg = <0x120000 0x6000>;
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
- <&CP110_LABEL(clk) 1 18>;
- clock-names = "mg_clk", "mg_core_clk", "axi_clk";
- #address-cells = <1>;
- #size-cells = <0>;
-
- CP110_LABEL(comphy0): phy@0 {
- reg = <0>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy1): phy@1 {
- reg = <1>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy2): phy@2 {
- reg = <2>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy3): phy@3 {
- reg = <3>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy4): phy@4 {
- reg = <4>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy5): phy@5 {
- reg = <5>;
- #phy-cells = <1>;
- };
- };
-
- CP110_LABEL(mdio): mdio@12a200 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
- reg = <0x12a200 0x10>;
- clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>,
- <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
- status = "disabled";
- };
-
- CP110_LABEL(xmdio): mdio@12a600 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,xmdio";
- reg = <0x12a600 0x10>;
- clocks = <&CP110_LABEL(clk) 1 5>,
- <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
- status = "disabled";
- };
-
- CP110_LABEL(icu): interrupt-controller@1e0000 {
- compatible = "marvell,cp110-icu";
- reg = <0x1e0000 0x440>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- CP110_LABEL(icu_nsr): interrupt-controller@10 {
- compatible = "marvell,cp110-icu-nsr";
- reg = <0x10 0x20>;
- #interrupt-cells = <2>;
- interrupt-controller;
- msi-parent = <&gicp>;
- };
-
- CP110_LABEL(icu_sei): interrupt-controller@50 {
- compatible = "marvell,cp110-icu-sei";
- reg = <0x50 0x10>;
- #interrupt-cells = <2>;
- interrupt-controller;
- msi-parent = <&sei>;
- };
- };
-
- CP110_LABEL(rtc): rtc@284000 {
- compatible = "marvell,armada-8k-rtc";
- reg = <0x284000 0x20>, <0x284080 0x24>;
- reg-names = "rtc", "rtc-soc";
- interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- CP110_LABEL(syscon0): system-controller@440000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x440000 0x2000>;
-
- CP110_LABEL(clk): clock {
- compatible = "marvell,cp110-clock";
- #clock-cells = <2>;
- };
-
- CP110_LABEL(gpio1): gpio@100 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x100>;
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
- interrupt-controller;
- interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
- <85 IRQ_TYPE_LEVEL_HIGH>,
- <84 IRQ_TYPE_LEVEL_HIGH>,
- <83 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <2>;
- status = "disabled";
- };
-
- CP110_LABEL(gpio2): gpio@140 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x140>;
- ngpios = <31>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
- interrupt-controller;
- interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
- <81 IRQ_TYPE_LEVEL_HIGH>,
- <80 IRQ_TYPE_LEVEL_HIGH>,
- <79 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <2>;
- status = "disabled";
- };
- };
-
- CP110_LABEL(syscon1): system-controller@400000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x400000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- CP110_LABEL(thermal): thermal-sensor@70 {
- compatible = "marvell,armada-cp110-thermal";
- reg = <0x70 0x10>;
- interrupts-extended =
- <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
- #thermal-sensor-cells = <1>;
- };
- };
-
- CP110_LABEL(usb3_0): usb3@500000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x500000 0x4000>;
- dma-coherent;
- interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 22>,
- <&CP110_LABEL(clk) 1 16>;
- status = "disabled";
- };
-
- CP110_LABEL(usb3_1): usb3@510000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x510000 0x4000>;
- dma-coherent;
- interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 23>,
- <&CP110_LABEL(clk) 1 16>;
- status = "disabled";
- };
-
- CP110_LABEL(sata0): sata@540000 {
- compatible = "marvell,armada-8k-ahci",
- "generic-ahci";
- reg = <0x540000 0x30000>;
- dma-coherent;
- interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CP110_LABEL(clk) 1 15>,
- <&CP110_LABEL(clk) 1 16>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata-port@0 {
- reg = <0>;
- };
-
- sata-port@1 {
- reg = <1>;
- };
- };
-
- CP110_LABEL(xor0): xor@6a0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 8>,
- <&CP110_LABEL(clk) 1 14>;
- };
-
- CP110_LABEL(xor1): xor@6c0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 7>,
- <&CP110_LABEL(clk) 1 14>;
- };
-
- CP110_LABEL(spi0): spi@700600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700600 0x50>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(clk) 1 21>,
- <&CP110_LABEL(clk) 1 17>;
- status = "disabled";
- };
-
- CP110_LABEL(spi1): spi@700680 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700680 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(clk) 1 21>,
- <&CP110_LABEL(clk) 1 17>;
- status = "disabled";
- };
-
- CP110_LABEL(i2c0): i2c@701000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 21>,
- <&CP110_LABEL(clk) 1 17>;
- status = "disabled";
- };
-
- CP110_LABEL(i2c1): i2c@701100 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701100 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 21>,
- <&CP110_LABEL(clk) 1 17>;
- status = "disabled";
- };
-
- CP110_LABEL(uart0): serial@702000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702000 0x100>;
- reg-shift = <2>;
- interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(clk) 1 21>,
- <&CP110_LABEL(clk) 1 17>;
- status = "disabled";
- };
-
- CP110_LABEL(uart1): serial@702100 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702100 0x100>;
- reg-shift = <2>;
- interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(clk) 1 21>,
- <&CP110_LABEL(clk) 1 17>;
- status = "disabled";
- };
-
- CP110_LABEL(uart2): serial@702200 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702200 0x100>;
- reg-shift = <2>;
- interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(clk) 1 21>,
- <&CP110_LABEL(clk) 1 17>;
- status = "disabled";
- };
-
- CP110_LABEL(uart3): serial@702300 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702300 0x100>;
- reg-shift = <2>;
- interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(clk) 1 21>,
- <&CP110_LABEL(clk) 1 17>;
- status = "disabled";
- };
-
- CP110_LABEL(nand_controller): nand@720000 {
- /*
- * Due to the limitation of the pins available
- * this controller is only usable on the CPM
- * for A7K and on the CPS for A8K.
- */
- compatible = "marvell,armada-8k-nand-controller",
- "marvell,armada370-nand-controller";
- reg = <0x720000 0x54>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 2>,
- <&CP110_LABEL(clk) 1 17>;
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- status = "disabled";
- };
-
- CP110_LABEL(trng): trng@760000 {
- compatible = "marvell,armada-8k-rng",
- "inside-secure,safexcel-eip76";
- reg = <0x760000 0x7d>;
- interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 25>,
- <&CP110_LABEL(clk) 1 17>;
- status = "okay";
- };
-
- CP110_LABEL(sdhci0): sdhci@780000 {
- compatible = "marvell,armada-cp110-sdhci";
- reg = <0x780000 0x300>;
- interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
- dma-coherent;
- status = "disabled";
- };
-
- CP110_LABEL(crypto): crypto@800000 {
- compatible = "inside-secure,safexcel-eip197b";
- reg = <0x800000 0x200000>;
- interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
- <88 IRQ_TYPE_LEVEL_HIGH>,
- <89 IRQ_TYPE_LEVEL_HIGH>,
- <90 IRQ_TYPE_LEVEL_HIGH>,
- <91 IRQ_TYPE_LEVEL_HIGH>,
- <92 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mem", "ring0", "ring1",
- "ring2", "ring3", "eip";
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 26>,
- <&CP110_LABEL(clk) 1 17>;
- dma-coherent;
- };
- };
-
- CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>;
- status = "disabled";
- };
-
- CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>;
- status = "disabled";
- };
-
- CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>;
- status = "disabled";
- };
-};
+#undef CP11X_TYPE
new file mode 100644
@@ -0,0 +1,579 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP11x.
+ */
+
+#include <dt-bindings/interrupt-controller/mvebu-icu.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "armada-common.dtsi"
+
+#define CP11X_PCIEx_IO_BASE(iface) (CP11X_PCIE_IO_BASE + (iface * 0x10000))
+#define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000))
+#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
+
+/ {
+ /*
+ * The contents of the node are defined below, in order to
+ * save one indentation level
+ */
+ CP11X_NAME: CP11X_NAME { };
+
+ /*
+ * CPs only have one sensor in the thermal IC.
+ *
+ * The cooling maps are empty as there are no cooling devices.
+ */
+ thermal-zones {
+ CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
+ polling-delay-passive = <0>; /* Interrupt driven */
+ polling-delay = <0>; /* Interrupt driven */
+
+ thermal-sensors = <&CP11X_LABEL(thermal) 0>;
+
+ trips {
+ CP11X_LABEL(crit): crit {
+ temperature = <100000>; /* mC degrees */
+ hysteresis = <2000>; /* mC degrees */
+ type = "critical";
+ };
+ };
+
+ cooling-maps { };
+ };
+ };
+};
+
+&CP11X_NAME {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
+ ranges;
+
+ config-space@CP11X_BASE {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
+
+ CP11X_LABEL(ethernet): ethernet@0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>;
+ clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
+ <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+ <&CP11X_LABEL(clk) 1 18>;
+ clock-names = "pp_clk", "gop_clk",
+ "mg_clk", "mg_core_clk", "axi_clk";
+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+ status = "disabled";
+ dma-coherent;
+
+ CP11X_LABEL(eth0): eth0 {
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
+ <43 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <51 IRQ_TYPE_LEVEL_HIGH>,
+ <55 IRQ_TYPE_LEVEL_HIGH>,
+ <59 IRQ_TYPE_LEVEL_HIGH>,
+ <63 IRQ_TYPE_LEVEL_HIGH>,
+ <67 IRQ_TYPE_LEVEL_HIGH>,
+ <71 IRQ_TYPE_LEVEL_HIGH>,
+ <129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
+ port-id = <0>;
+ gop-port-id = <0>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(eth1): eth1 {
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
+ <44 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>,
+ <52 IRQ_TYPE_LEVEL_HIGH>,
+ <56 IRQ_TYPE_LEVEL_HIGH>,
+ <60 IRQ_TYPE_LEVEL_HIGH>,
+ <64 IRQ_TYPE_LEVEL_HIGH>,
+ <68 IRQ_TYPE_LEVEL_HIGH>,
+ <72 IRQ_TYPE_LEVEL_HIGH>,
+ <128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
+ port-id = <1>;
+ gop-port-id = <2>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(eth2): eth2 {
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
+ <45 IRQ_TYPE_LEVEL_HIGH>,
+ <49 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>,
+ <57 IRQ_TYPE_LEVEL_HIGH>,
+ <61 IRQ_TYPE_LEVEL_HIGH>,
+ <65 IRQ_TYPE_LEVEL_HIGH>,
+ <69 IRQ_TYPE_LEVEL_HIGH>,
+ <73 IRQ_TYPE_LEVEL_HIGH>,
+ <127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
+ port-id = <2>;
+ gop-port-id = <3>;
+ status = "disabled";
+ };
+ };
+
+ CP11X_LABEL(comphy): phy@120000 {
+ compatible = "marvell,comphy-cp110";
+ reg = <0x120000 0x6000>;
+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+ clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+ <&CP11X_LABEL(clk) 1 18>;
+ clock-names = "mg_clk", "mg_core_clk", "axi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CP11X_LABEL(comphy0): phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy1): phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy2): phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy3): phy@3 {
+ reg = <3>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy4): phy@4 {
+ reg = <4>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy5): phy@5 {
+ reg = <5>;
+ #phy-cells = <1>;
+ };
+ };
+
+ CP11X_LABEL(mdio): mdio@12a200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x12a200 0x10>;
+ clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>,
+ <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(xmdio): mdio@12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x10>;
+ clocks = <&CP11X_LABEL(clk) 1 5>,
+ <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(icu): interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x440>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP11X_LABEL(icu_nsr): interrupt-controller@10 {
+ compatible = "marvell,cp110-icu-nsr";
+ reg = <0x10 0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
+
+ CP11X_LABEL(icu_sei): interrupt-controller@50 {
+ compatible = "marvell,cp110-icu-sei";
+ reg = <0x50 0x10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&sei>;
+ };
+ };
+
+ CP11X_LABEL(rtc): rtc@284000 {
+ compatible = "marvell,armada-8k-rtc";
+ reg = <0x284000 0x20>, <0x284080 0x24>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ CP11X_LABEL(syscon0): system-controller@440000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x440000 0x2000>;
+
+ CP11X_LABEL(clk): clock {
+ compatible = "marvell,cp110-clock";
+ #clock-cells = <2>;
+ };
+
+ CP11X_LABEL(gpio1): gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
+ interrupt-controller;
+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
+ <85 IRQ_TYPE_LEVEL_HIGH>,
+ <84 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(gpio2): gpio@140 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x140>;
+ ngpios = <31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
+ interrupt-controller;
+ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ CP11X_LABEL(syscon1): system-controller@400000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x400000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP11X_LABEL(thermal): thermal-sensor@70 {
+ compatible = "marvell,armada-cp110-thermal";
+ reg = <0x70 0x10>;
+ interrupts-extended =
+ <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ CP11X_LABEL(usb3_0): usb3@500000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x500000 0x4000>;
+ dma-coherent;
+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 22>,
+ <&CP11X_LABEL(clk) 1 16>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(usb3_1): usb3@510000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x510000 0x4000>;
+ dma-coherent;
+ interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 23>,
+ <&CP11X_LABEL(clk) 1 16>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(sata0): sata@540000 {
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
+ reg = <0x540000 0x30000>;
+ dma-coherent;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP11X_LABEL(clk) 1 15>,
+ <&CP11X_LABEL(clk) 1 16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata-port@0 {
+ reg = <0>;
+ };
+
+ sata-port@1 {
+ reg = <1>;
+ };
+ };
+
+ CP11X_LABEL(xor0): xor@6a0000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 8>,
+ <&CP11X_LABEL(clk) 1 14>;
+ };
+
+ CP11X_LABEL(xor1): xor@6c0000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 7>,
+ <&CP11X_LABEL(clk) 1 14>;
+ };
+
+ CP11X_LABEL(spi0): spi@700600 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700600 0x50>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clock-names = "core", "axi";
+ clocks = <&CP11X_LABEL(clk) 1 21>,
+ <&CP11X_LABEL(clk) 1 17>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(spi1): spi@700680 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700680 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "core", "axi";
+ clocks = <&CP11X_LABEL(clk) 1 21>,
+ <&CP11X_LABEL(clk) 1 17>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(i2c0): i2c@701000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 21>,
+ <&CP11X_LABEL(clk) 1 17>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(i2c1): i2c@701100 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 21>,
+ <&CP11X_LABEL(clk) 1 17>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart0): serial@702000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702000 0x100>;
+ reg-shift = <2>;
+ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(clk) 1 21>,
+ <&CP11X_LABEL(clk) 1 17>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart1): serial@702100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702100 0x100>;
+ reg-shift = <2>;
+ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(clk) 1 21>,
+ <&CP11X_LABEL(clk) 1 17>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart2): serial@702200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702200 0x100>;
+ reg-shift = <2>;
+ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(clk) 1 21>,
+ <&CP11X_LABEL(clk) 1 17>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart3): serial@702300 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702300 0x100>;
+ reg-shift = <2>;
+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(clk) 1 21>,
+ <&CP11X_LABEL(clk) 1 17>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(nand_controller): nand@720000 {
+ /*
+ * Due to the limitation of the pins available
+ * this controller is only usable on the CPM
+ * for A7K and on the CPS for A8K.
+ */
+ compatible = "marvell,armada-8k-nand-controller",
+ "marvell,armada370-nand-controller";
+ reg = <0x720000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 2>,
+ <&CP11X_LABEL(clk) 1 17>;
+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(trng): trng@760000 {
+ compatible = "marvell,armada-8k-rng",
+ "inside-secure,safexcel-eip76";
+ reg = <0x760000 0x7d>;
+ interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 25>,
+ <&CP11X_LABEL(clk) 1 17>;
+ status = "okay";
+ };
+
+ CP11X_LABEL(sdhci0): sdhci@780000 {
+ compatible = "marvell,armada-cp110-sdhci";
+ reg = <0x780000 0x300>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "axi";
+ clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(crypto): crypto@800000 {
+ compatible = "inside-secure,safexcel-eip197b";
+ reg = <0x800000 0x200000>;
+ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
+ <88 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <90 IRQ_TYPE_LEVEL_HIGH>,
+ <91 IRQ_TYPE_LEVEL_HIGH>,
+ <92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mem", "ring0", "ring1",
+ "ring2", "ring3", "eip";
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 26>,
+ <&CP11X_LABEL(clk) 1 17>;
+ dma-coherent;
+ };
+ };
+
+ CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>,
+ <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* downstream I/O */
+ <0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0 CP11X_PCIEx_IO_BASE(0) 0 0x10000
+ /* non-prefetchable memory */
+ 0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>,
+ <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* downstream I/O */
+ <0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0 CP11X_PCIEx_IO_BASE(1) 0 0x10000
+ /* non-prefetchable memory */
+ 0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>,
+ <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* downstream I/O */
+ <0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0 CP11X_PCIEx_IO_BASE(2) 0 0x10000
+ /* non-prefetchable memory */
+ 0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>;
+ status = "disabled";
+ };
+};
CP110 and CP115 are almost the same in terms of features and have a very limited set of differences. Let's create an armada-cp11x.dtsi file which will be used to instantiate both CP110 and CP115 nodes. The only changes between the two armada-cp11{0,x}.dtsi files are the following naming in macros: s/CP110/CP11X/. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 28 +- arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 56 +- .../arm64/boot/dts/marvell/armada-common.dtsi | 4 +- arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 575 +---------------- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 579 ++++++++++++++++++ 5 files changed, 627 insertions(+), 615 deletions(-) create mode 100644 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi