diff mbox series

arm64: dts: mt2712: add ethernet device node

Message ID 20190813073542.6569-1-biao.huang@mediatek.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: mt2712: add ethernet device node | expand

Commit Message

Biao Huang (黄彪) Aug. 13, 2019, 7:35 a.m. UTC 
This patch add device node for mt2712 ethernet.

Signed-off-by: Biao Huang <biao.huang@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 69 +++++++++++++++++++++
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi   | 65 +++++++++++++++++++
 2 files changed, 134 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index 1353dad2f53c..3118f96706d9 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -107,7 +107,76 @@ 
 	proc-supply = <&cpus_fixed_vproc1>;
 };
 
+&eth {
+	phy-mode ="rgmii-rxid";
+	phy-handle = <&ethernet_phy0>;
+	mediatek,tx-delay-ps = <1530>;
+	snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default>;
+	pinctrl-1 = <&eth_sleep>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethernet_phy0: ethernet-phy@5 {
+			compatible = "ethernet-phy-id0243.0d90";
+			reg = <0x5>;
+		};
+	};
+};
+
 &pio {
+	eth_default: eth_default {
+		tx_pins {
+			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
+				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
+				 <MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1>,
+				 <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>,
+				 <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>,
+				 <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+		rx_pins {
+			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>,
+				 <MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2>,
+				 <MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1>,
+				 <MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0>,
+				 <MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV>,
+				 <MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC>;
+		};
+		mdio_pins {
+			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>,
+				 <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+	};
+
+	eth_sleep: eth_sleep {
+		tx_pins {
+			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
+				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
+				 <MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73>,
+				 <MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74>,
+				 <MT2712_PIN_75_GBE_TXC__FUNC_GPIO75>,
+				 <MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76>;
+		};
+		rx_pins {
+			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78>,
+				 <MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79>,
+				 <MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80>,
+				 <MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81>,
+				 <MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82>,
+				 <MT2712_PIN_84_GBE_RXC__FUNC_GPIO84>;
+		};
+		mdio_pins {
+			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GPIO85>,
+				 <MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86>;
+		};
+	};
+
 	usb0_id_pins_float: usb0_iddig {
 		pins_iddig {
 			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 43307bad3f0d..b2edec20c8da 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -632,6 +632,71 @@ 
 		status = "disabled";
 	};
 
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <0x7>;
+		snps,rd_osr_lmt = <0x7>;
+		snps,blen = <0 0 0 0 16 8 4>;
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <1>;
+		snps,rx-sched-sp;
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,priority = <0x0>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <3>;
+		snps,tx-sched-wrr;
+		queue0 {
+			snps,weight = <0x10>;
+			snps,dcb-algorithm;
+			snps,priority = <0x0>;
+		};
+		queue1 {
+			snps,weight = <0x11>;
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+		queue2 {
+			snps,weight = <0x12>;
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+	};
+
+	eth: ethernet@1101c000 {
+		compatible = "mediatek,mt2712-gmac";
+		reg = <0 0x1101c000 0 0x1300>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "macirq";
+		mac-address = [00 55 7b b5 7d f7];
+		clock-names = "axi",
+			      "apb",
+			      "mac_main",
+			      "ptp_ref";
+		clocks = <&pericfg CLK_PERI_GMAC>,
+			 <&pericfg CLK_PERI_GMAC_PCLK>,
+			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
+			 <&topckgen CLK_TOP_ETHER_50M_SEL>;
+		assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
+				  <&topckgen CLK_TOP_ETHER_50M_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
+					 <&topckgen CLK_TOP_APLL1_D3>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
+		mediatek,pericfg = <&pericfg>;
+		snps,axi-config = <&stmmac_axi_setup>;
+		snps,mtl-rx-config = <&mtl_rx_setup>;
+		snps,mtl-tx-config = <&mtl_tx_setup>;
+		snps,txpbl = <1>;
+		snps,rxpbl = <1>;
+		clk_csr = <0>;
+		status = "disabled";
+	};
+
 	mmc0: mmc@11230000 {
 		compatible = "mediatek,mt2712-mmc";
 		reg = <0 0x11230000 0 0x1000>;