diff mbox series

[1/2] mmc: mediatek: fix controller busy when plug out SD

Message ID 20190822064741.11196-2-chaotian.jing@mediatek.com (mailing list archive)
State Mainlined
Commit da6e0f7024ff92e2a68033d6b3980a047d005a85
Headers show
Series [1/2] mmc: mediatek: fix controller busy when plug out SD | expand

Commit Message

Chaotian Jing Aug. 22, 2019, 6:47 a.m. UTC 
when plug out SD card, may get data CRC error, the MMC core will issue
CMD13 to get card status, then CMD13 timeout(due to card plug out) will
trigger CMD19 tuning, first CMD19 timeout has not call msdc_reset_hw()
and cause the next CMD19 gets controller busy.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 33f4b6387ef7..5cc422e5db69 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1071,11 +1071,13 @@  static bool msdc_cmd_done(struct msdc_host *host, int events,
 	}
 
 	if (!sbc_error && !(events & MSDC_INT_CMDRDY)) {
-		if (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
-		    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
+		if (events & MSDC_INT_CMDTMO ||
+		    (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
+		     cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200))
 			/*
 			 * should not clear fifo/interrupt as the tune data
-			 * may have alreay come.
+			 * may have alreay come when cmd19/cmd21 gets response
+			 * CRC error.
 			 */
 			msdc_reset_hw(host);
 		if (events & MSDC_INT_RSPCRCERR) {