diff mbox series

[v2,08/20] irqchip/mmp: mask off interrupts from other cores

Message ID 20190822092643.593488-9-lkundrak@v3.sk (mailing list archive)
State New, archived
Headers show
Series Initial support for Marvell MMP3 SoC | expand

Commit Message

Lubomir Rintel Aug. 22, 2019, 9:26 a.m. UTC
From: Andres Salomon <dilinger@queued.net>

On mmp3, there's an extra set of ICU registers (ICU2) that handle
interrupts on the extra cores.  When masking off interrupts on MP1,
these should be masked as well.

We add a new interrupt controller via device tree to identify when we're
looking at an mmp3 machine via compatible field of "marvell,mmp3-intc".

[lkundrak@v3.sk: Changed "mrvl,mmp3-intc" compatible strings to
"marvell,mmp3-intc". Tidied up the subject line a bit.]

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

--
Changes since v1:
- Moved mmp3-specific mmp_icu2_base initialization from mmp_init_bases() to
  mmp3_of_init() so that we don't have to check for marvell,mmp3-intc
  compatibility twice.
- Drop an superfluous call to irq_set_default_host()

 arch/arm/mach-mmp/regs-icu.h |  3 +++
 drivers/irqchip/irq-mmp.c    | 48 ++++++++++++++++++++++++++++++++++++
 2 files changed, 51 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/mach-mmp/regs-icu.h b/arch/arm/mach-mmp/regs-icu.h
index 0375d5a7fcb2b..410743d2b4020 100644
--- a/arch/arm/mach-mmp/regs-icu.h
+++ b/arch/arm/mach-mmp/regs-icu.h
@@ -11,6 +11,9 @@ 
 #define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
 #define ICU_REG(x)	(ICU_VIRT_BASE + (x))
 
+#define ICU2_VIRT_BASE	(AXI_VIRT_BASE + 0x84000)
+#define ICU2_REG(x)	(ICU2_VIRT_BASE + (x))
+
 #define ICU_INT_CONF(n)		ICU_REG((n) << 2)
 #define ICU_INT_CONF_MASK	(0xf)
 
diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c
index 126ffdbffdddf..25848d73f6792 100644
--- a/drivers/irqchip/irq-mmp.c
+++ b/drivers/irqchip/irq-mmp.c
@@ -44,6 +44,7 @@  struct icu_chip_data {
 	unsigned int		conf_enable;
 	unsigned int		conf_disable;
 	unsigned int		conf_mask;
+	unsigned int		conf2_mask;
 	unsigned int		clr_mfp_irq_base;
 	unsigned int		clr_mfp_hwirq;
 	struct irq_domain	*domain;
@@ -53,9 +54,11 @@  struct mmp_intc_conf {
 	unsigned int	conf_enable;
 	unsigned int	conf_disable;
 	unsigned int	conf_mask;
+	unsigned int	conf2_mask;
 };
 
 static void __iomem *mmp_icu_base;
+static void __iomem *mmp_icu2_base;
 static struct icu_chip_data icu_data[MAX_ICU_NR];
 static int max_icu_nr;
 
@@ -98,6 +101,16 @@  static void icu_mask_irq(struct irq_data *d)
 		r &= ~data->conf_mask;
 		r |= data->conf_disable;
 		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+
+		if (data->conf2_mask) {
+			/*
+			 * ICU1 (above) only controls PJ4 MP1; if using SMP,
+			 * we need to also mask the MP2 and MM cores via ICU2.
+			 */
+			r = readl_relaxed(mmp_icu2_base + (hwirq << 2));
+			r &= ~data->conf2_mask;
+			writel_relaxed(r, mmp_icu2_base + (hwirq << 2));
+		}
 	} else {
 		r = readl_relaxed(data->reg_mask) | (1 << hwirq);
 		writel_relaxed(r, data->reg_mask);
@@ -201,6 +214,14 @@  static const struct mmp_intc_conf mmp2_conf = {
 			  MMP2_ICU_INT_ROUTE_PJ4_FIQ,
 };
 
+static struct mmp_intc_conf mmp3_conf = {
+	.conf_enable	= 0x20,
+	.conf_disable	= 0x0,
+	.conf_mask	= MMP2_ICU_INT_ROUTE_PJ4_IRQ |
+			  MMP2_ICU_INT_ROUTE_PJ4_FIQ,
+	.conf2_mask	= 0xf0,
+};
+
 static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs)
 {
 	int hwirq;
@@ -428,6 +449,33 @@  static int __init mmp2_of_init(struct device_node *node,
 }
 IRQCHIP_DECLARE(mmp2_intc, "mrvl,mmp2-intc", mmp2_of_init);
 
+static int __init mmp3_of_init(struct device_node *node,
+			       struct device_node *parent)
+{
+	int ret;
+
+	mmp_icu2_base = of_iomap(node, 1);
+	if (!mmp_icu2_base) {
+		pr_err("Failed to get interrupt controller register #2\n");
+		return -ENODEV;
+	}
+
+	ret = mmp_init_bases(node);
+	if (ret < 0) {
+		iounmap(mmp_icu2_base);
+		return ret;
+	}
+
+	icu_data[0].conf_enable = mmp3_conf.conf_enable;
+	icu_data[0].conf_disable = mmp3_conf.conf_disable;
+	icu_data[0].conf_mask = mmp3_conf.conf_mask;
+	icu_data[0].conf2_mask = mmp3_conf.conf2_mask;
+	set_handle_irq(mmp2_handle_irq);
+	max_icu_nr = 1;
+	return 0;
+}
+IRQCHIP_DECLARE(mmp3_intc, "marvell,mmp3-intc", mmp3_of_init);
+
 static int __init mmp2_mux_of_init(struct device_node *node,
 				   struct device_node *parent)
 {