| Message ID | 20190825153237.28829-6-shawnguo@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [GIT,PULL,1/7] i.MX drivers update for 5.4 | expand |
On Sun, Aug 25, 2019 at 5:33 PM Shawn Guo <shawnguo@kernel.org> wrote: > ---------------------------------------------------------------- > i.MX arm64 device tree update for 5.4: > - New board support: i.MX8MQ Nitrogen8m, Hummingboard Pulse, > PICO-PI-IMX8M, i.MX8QXP AI_ML, and LS1046A FRWY board. > - Add gpio-ranges for GPIO devices on i.MX8MQ and i.MX8MM. > - Update OPP table according to latest data sheet and add opp-suspend > to OPP table for i.MX8MQ and i.MX8MM. > - Add IDEL states for i.MX8MM SoC. > - Correct I2C clock divider for Layerscape SoCs. > - Add series alias and LPUART baud clock for i.MX8QXP SoC. > - Add MIPI D-PHY device for i.MX8MQ and enable it on imx8mq-librem5 > board. > - Enable USB1 and Type-C support for i.MX8MM EVK board. > - Add Thermal Monitor Unit support for LS1028A SoC. > - Misc small update and correction on Layerscape and i.MX8 support. > Pulled into arm/dt, thanks! Arnd
The following changes since commit 5f9e832c137075045d15cd6899ab0505cfb2ca4b: Linus 5.3-rc1 (2019-07-21 14:05:38 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.4 for you to fetch changes up to 215701807e53a379e1c9b2e6401676779ef85ea0: arm64: dts: imx8mq: Add mux controller to iomuxc_gpr (2019-08-24 22:47:07 +0200) ---------------------------------------------------------------- i.MX arm64 device tree update for 5.4: - New board support: i.MX8MQ Nitrogen8m, Hummingboard Pulse, PICO-PI-IMX8M, i.MX8QXP AI_ML, and LS1046A FRWY board. - Add gpio-ranges for GPIO devices on i.MX8MQ and i.MX8MM. - Update OPP table according to latest data sheet and add opp-suspend to OPP table for i.MX8MQ and i.MX8MM. - Add IDEL states for i.MX8MM SoC. - Correct I2C clock divider for Layerscape SoCs. - Add series alias and LPUART baud clock for i.MX8QXP SoC. - Add MIPI D-PHY device for i.MX8MQ and enable it on imx8mq-librem5 board. - Enable USB1 and Type-C support for i.MX8MM EVK board. - Add Thermal Monitor Unit support for LS1028A SoC. - Misc small update and correction on Layerscape and i.MX8 support. ---------------------------------------------------------------- Abel Vesa (1): arm64: dts: imx8mm: Init rates and parents configs for clocks Anson Huang (9): arm64: dts: imx8mq: Add gpio-ranges property arm64: dts: imx8mm: Add gpio-ranges property arm64: dts: imx8mm: Add "fsl,imx8mq-src" as src's fallback compatible arm64: dts: imx8mm: Correct OPP table according to latest datasheet arm64: dts: imx8mq: Correct OPP table according to latest datasheet arm64: dts: imx8mq: Add clock for TMU node arm64: dts: imx8mq: Add opp-suspend property to OPP table arm64: dts: imx8mm: Add opp-suspend property to OPP table arm64: dts: imx8mm: Enable cpu-idle driver Ashish Kumar (1): arm64: dts: ls1028a: Add esdhc node in dts Chuanhua Han (7): arm64: dts: ls1088a: Revise gpio registers to little-endian arm64: dts: ls1088a: Fix incorrect I2C clock divider arm64: dts: ls1012a: Fix incorrect I2C clock divider arm64: dts: ls1028a: Fix incorrect I2C clock divider arm64: dts: lx2160a: Fix incorrect I2C clock divider arm64: dts: ls1088a: Add the DSPI controller node arm64: dts: ls1088a-qds: Add the spi-flash nodes under the DSPI controller Daniel Baluta (1): arm64: dts: imx8mq-evk: Unbypass audio_pll1 Fabio Estevam (1): arm64: dts: imx8mm-evk: Remove invalid properties Fugang Duan (2): arm64: dts: imx8qxp: add lpuart baud clock arm64: dts: imx8qxp: add serial alias Gary Bisson (1): arm64: dts: imx: Add i.mx8mq nitrogen8m basic dts support Guido Günther (3): arm64: dts: imx8mq: Add MIPI D-PHY arm64: dts: imx8mq-librem5: Enable MIPI D-PHY arm64: dts: imx8mq: Add mux controller to iomuxc_gpr Ioana Ciornei (1): arm64: dts: add the console node for DPAA2 platforms Jon Nettleton (1): arm64: dts: fsl: add support for Hummingboard Pulse Leonard Crestez (1): arm64: dts: imx8m: Add ddr-pmu nodes Li Jun (3): arm64: dts: imx8mm: Remove setting for IMX8MM_CLK_USB_CORE_REF arm64: dts: imx8mm-evk: enable usb1 and typec support arm64: dts: imx8mq: correct usb controller clocks Lucas Stach (1): arm64: dts: rdu3: add UCS1002 charge controller node Manivannan Sadhasivam (1): arm64: dts: freescale: Add support for i.MX8QXP AI_ML board Pramod Kumar (1): arm64: dts: nxp: add ls1046a-frwy board support Richard Hu (1): arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M Song Hui (2): arm64: dts: ls1028a: fix gpio nodes arm64: dts: ls1088a: update gpio compatible Wen He (2): arm64: dts: ls1028a: Add optional property node for Mali DP500 arm64: dts: ls1028a: Add properties node for Display output pixel clock Yuantian Tang (1): arm64: dts: ls1028a: Add Thermal Monitor Unit node arch/arm64/boot/dts/freescale/Makefile | 5 + arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 +- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 8 + arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 13 + arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 151 +++++++- arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 155 ++++++++ arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 33 ++ arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 38 +- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 5 + arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 21 +- arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 68 +++- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 61 ++- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 6 +- .../dts/freescale/imx8mq-hummingboard-pulse.dts | 256 +++++++++++++ .../boot/dts/freescale/imx8mq-librem5-devkit.dts | 4 + arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 405 ++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts | 413 +++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi | 309 +++++++++++++++ .../arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 46 ++- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 52 ++- arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts | 249 +++++++++++++ arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 23 +- 22 files changed, 2241 insertions(+), 84 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts