[1/2] ARM: dts: aspeed: Add AST2600 and EVB

Message ID	20190911165614.31641-1-joel@jms.id.au (mailing list archive)
State	Mainlined
Commit	2ca5646b5c2fdb3806c48f03c77859601e78edb7
Headers	show Return-Path: <SRS0=WjL6=XG=lists.infradead.org=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@kernel.org> DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 486CF2084F From: Joel Stanley <joel@jms.id.au> To: soc@kernel.org Subject: [PATCH 1/2] ARM: dts: aspeed: Add AST2600 and EVB Date: Wed, 11 Sep 2019 17:56:13 +0100 Message-Id: <20190911165614.31641-1-joel@jms.id.au> MIME-Version: 1.0 summary: Content analysis details: (-0.1 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at https://www.dnswl.org/, no trust [2a00:1450:4864:20:0:0:0:442 listed in] [list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record 0.0 HEADER_FROM_DIFFERENT_DOMAINS From and EnvelopeFrom 2nd level mail domains are different 0.0 FREEMAIL_FROM Sender email is commonly abused enduser mail provider (joel.stan[at]gmail.com) 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.0 FREEMAIL_FORGED_FROMDOMAIN 2nd level domains in From and EnvelopeFrom freemail headers are different Precedence: list Cc: Andrew Jeffery <andrew@aj.id.au>, linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org
Series	[1/2] ARM: dts: aspeed: Add AST2600 and EVB \| expand [1/2] ARM: dts: aspeed: Add AST2600 and EVB [2/2] ARM: dts: aspeed: Add AST2600 pinmux nodes

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a24a6a132b07..40a5178ba25c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1278,6 +1278,7 @@ dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ + aspeed-ast2600-evb.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-facebook-cmm.dtb \ diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts new file mode 100644 index 000000000000..9870553919b7 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. + +/dts-v1/; + +#include "aspeed-g6.dtsi" + +/ { + model = "AST2600 EVB"; + compatible = "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; +}; + +&mdio1 { + status = "okay"; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mdio2 { + status = "okay"; + + ethphy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mdio3 { + status = "okay"; + + ethphy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac1 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <&ethphy1>; +}; + +&mac2 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <&ethphy2>; +}; + +&mac3 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <&ethphy3>; +}; + +&emmc { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi new file mode 100644 index 000000000000..9f9931541060 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/ast2600-clock.h> + +/ { + model = "Aspeed BMC"; + compatible = "aspeed,ast2600"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + aliases { + serial4 = &uart5; + }; + + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "aspeed,ast2600-smp"; + + cpu@f00 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf00>; + }; + + cpu@f01 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf01>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + clocks = <&syscon ASPEED_CLK_HPLL>; + arm,cpu-registers-not-fw-configured; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges; + + gic: interrupt-controller@40461000 { + compatible = "arm,cortex-a7-gic"; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&gic>; + reg = <0x40461000 0x1000>, + <0x40462000 0x1000>, + <0x40464000 0x2000>, + <0x40466000 0x2000>; + }; + + mdio0: mdio@1e650000 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650000 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mdio1: mdio@1e650008 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650008 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mdio2: mdio@1e650010 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650010 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mdio3: mdio@1e650018 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650018 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mac0: ftgmac@1e660000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>; + status = "disabled"; + }; + + mac1: ftgmac@1e680000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>; + status = "disabled"; + }; + + mac2: ftgmac@1e670000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e670000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>; + status = "disabled"; + }; + + mac3: ftgmac@1e690000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e690000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>; + status = "disabled"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon: syscon@1e6e2000 { + compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1000>; + ranges = <0 0x1e6e2000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + + pinctrl: pinctrl { + compatible = "aspeed,ast2600-pinctrl"; + }; + + smp-memram@180 { + compatible = "aspeed,ast2600-smpmem"; + reg = <0x180 0x40>; + }; + }; + + rng: hwrng@1e6e2524 { + compatible = "timeriomem_rng"; + reg = <0x1e6e2524 0x4>; + period = <1>; + quality = <100>; + }; + + rtc: rtc@1e781000 { + compatible = "aspeed,ast2600-rtc"; + reg = <0x1e781000 0x18>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart5: serial@1e784000 { + compatible = "ns16550a"; + reg = <0x1e784000 0x1000>; + reg-shift = <2>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>; + no-loopback-test; + }; + + wdt1: watchdog@1e785000 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785000 0x40>; + }; + + wdt2: watchdog@1e785040 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785040 0x40>; + status = "disabled"; + }; + + wdt3: watchdog@1e785080 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785080 0x40>; + status = "disabled"; + }; + + wdt4: watchdog@1e7850C0 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e7850C0 0x40>; + status = "disabled"; + }; + + sdc: sdc@1e740000 { + compatible = "aspeed,ast2600-sd-controller"; + reg = <0x1e740000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e740000 0x10000>; + clocks = <&syscon ASPEED_CLK_GATE_SDCLK>; + status = "disabled"; + + sdhci0: sdhci@1e740100 { + compatible = "aspeed,ast2600-sdhci", "sdhci"; + reg = <0x100 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + status = "disabled"; + }; + + sdhci1: sdhci@1e740200 { + compatible = "aspeed,ast2600-sdhci", "sdhci"; + reg = <0x200 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + status = "disabled"; + }; + }; + + emmc: sdc@1e750000 { + compatible = "aspeed,ast2600-sd-controller"; + reg = <0x1e750000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e750000 0x10000>; + clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>; + status = "disabled"; + + sdhci@1e750100 { + compatible = "aspeed,ast2600-sdhci"; + reg = <0x100 0x100>; + sdhci,auto-cmd12; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_EMMC>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc_default>; + }; + }; + }; + }; +}; + +&pinctrl { + pinctrl_emmc_default: emmc_default { + function = "SD3"; + groups = "SD3"; + }; +};

[1/2] ARM: dts: aspeed: Add AST2600 and EVB

Commit Message

Patch