@@ -20,27 +20,29 @@
#define PCIE_DBI2_OFFSET 0x1000 /* DBI2 base address*/
-struct ls_pcie_ep {
- struct dw_pcie *pci;
- struct pci_epc_features *ls_epc;
+#define to_ls_pcie_ep(x) dev_get_drvdata((x)->dev)
+
+struct ls_pcie_ep_drvdata {
+ u32 func_offset;
+ const struct dw_pcie_ep_ops *ops;
+ const struct dw_pcie_ops *dw_pcie_ops;
};
-#define to_ls_pcie_ep(x) dev_get_drvdata((x)->dev)
+struct ls_pcie_ep {
+ struct dw_pcie *pci;
+ struct pci_epc_features *ls_epc;
+ const struct ls_pcie_ep_drvdata *drvdata;
+};
static int ls_pcie_establish_link(struct dw_pcie *pci)
{
return 0;
}
-static const struct dw_pcie_ops ls_pcie_ep_ops = {
+static const struct dw_pcie_ops dw_ls_pcie_ep_ops = {
.start_link = ls_pcie_establish_link,
};
-static const struct of_device_id ls_pcie_ep_of_match[] = {
- { .compatible = "fsl,ls-pcie-ep",},
- { },
-};
-
static const struct pci_epc_features*
ls_pcie_ep_get_features(struct dw_pcie_ep *ep)
{
@@ -87,10 +89,39 @@ static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
}
}
-static const struct dw_pcie_ep_ops pcie_ep_ops = {
+static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
+ u8 func_no)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
+
+ WARN_ON(func_no && !pcie->drvdata->func_offset);
+ return pcie->drvdata->func_offset * func_no;
+}
+
+static const struct dw_pcie_ep_ops ls_pcie_ep_ops = {
.ep_init = ls_pcie_ep_init,
.raise_irq = ls_pcie_ep_raise_irq,
.get_features = ls_pcie_ep_get_features,
+ .func_conf_select = ls_pcie_ep_func_conf_select,
+};
+
+static const struct ls_pcie_ep_drvdata ls1_ep_drvdata = {
+ .ops = &ls_pcie_ep_ops,
+ .dw_pcie_ops = &dw_ls_pcie_ep_ops,
+};
+
+static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
+ .func_offset = 0x20000,
+ .ops = &ls_pcie_ep_ops,
+ .dw_pcie_ops = &dw_ls_pcie_ep_ops,
+};
+
+static const struct of_device_id ls_pcie_ep_of_match[] = {
+ { .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata },
+ { .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata },
+ { .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata },
+ { },
};
static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
@@ -103,7 +134,7 @@ static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
int ret;
ep = &pci->ep;
- ep->ops = &pcie_ep_ops;
+ ep->ops = pcie->drvdata->ops;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
if (!res)
@@ -142,20 +173,23 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
if (!ls_epc)
return -ENOMEM;
- dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
- pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
- if (IS_ERR(pci->dbi_base))
- return PTR_ERR(pci->dbi_base);
+ pcie->drvdata = of_device_get_match_data(dev);
- pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
pci->dev = dev;
- pci->ops = &ls_pcie_ep_ops;
- pcie->pci = pci;
+ pci->ops = pcie->drvdata->dw_pcie_ops;
ls_epc->bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4),
+ pcie->pci = pci;
pcie->ls_epc = ls_epc;
+ dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
+ if (IS_ERR(pci->dbi_base))
+ return PTR_ERR(pci->dbi_base);
+
+ pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
+
platform_set_drvdata(pdev, pcie);
ret = ls_add_pcie_ep(pcie, pdev);
Add PCIe EP mode support for ls1088a and ls2088a, there are some difference between LS1 and LS2 platform, so refactor the code of the EP driver. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> --- v2: - This is a new patch for supporting the ls1088a and ls2088a platform. v3: - Adjust the some struct assignment order in probe function. v4: - No change. drivers/pci/controller/dwc/pci-layerscape-ep.c | 72 +++++++++++++++++++------- 1 file changed, 53 insertions(+), 19 deletions(-)