| Message ID | 20190925191233.22253-3-khilman@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | soc: amlogic: ee-pwrc: cleanup init state | expand |
Kevin Hilman <khilman@baylibre.com> writes: > During init, ensure that the driver on/off state as well as clock > state matches the hardware state by calling drivers on/off functions > based on whether the HW state is on/off. > > Signed-off-by: Kevin Hilman <khilman@baylibre.com> > --- > drivers/soc/amlogic/meson-ee-pwrc.c | 30 +++++++++-------------------- > 1 file changed, 9 insertions(+), 21 deletions(-) > > diff --git a/drivers/soc/amlogic/meson-ee-pwrc.c b/drivers/soc/amlogic/meson-ee-pwrc.c > index dcce8e694a07..2cb5341aedfa 100644 > --- a/drivers/soc/amlogic/meson-ee-pwrc.c > +++ b/drivers/soc/amlogic/meson-ee-pwrc.c > @@ -323,6 +323,8 @@ static int meson_ee_pwrc_init_domain(struct platform_device *pdev, > struct meson_ee_pwrc *pwrc, > struct meson_ee_pwrc_domain *dom) > { > + bool is_off; > + > dom->pwrc = pwrc; > dom->num_rstc = dom->desc.reset_names_count; > dom->num_clks = dom->desc.clk_names_count; > @@ -356,27 +358,13 @@ static int meson_ee_pwrc_init_domain(struct platform_device *pdev, > dom->base.power_on = meson_ee_pwrc_on; > dom->base.power_off = meson_ee_pwrc_off; > > - /* > - * TOFIX: This is a special case for the VPU power domain, which can > - * be enabled previously by the bootloader. In this case the VPU > - * pipeline may be functional but no driver maybe never attach > - * to this power domain, and if the domain is disabled it could > - * cause system errors. This is why the pm_domain_always_on_gov > - * is used here. > - * For the same reason, the clocks should be enabled in case > - * we need to power the domain off, otherwise the internal clocks > - * prepare/enable counters won't be in sync. > - */ > - if (dom->num_clks && dom->desc.is_off && !dom->desc.is_off(dom)) { > - int ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks); > - if (ret) > - return ret; > - > - pm_genpd_init(&dom->base, &pm_domain_always_on_gov, false); > - } else > - pm_genpd_init(&dom->base, NULL, > - (dom->desc.is_off ? > - dom->desc.is_off(dom) : true)); > + /* Ensure that driver state matches HW state */ > + is_off = dom->desc.is_off ? dom->desc.is_off(dom) : true; > + if (is_off) > + meson_ee_pwrc_off(&dom->base); Neil pointed out off-list that this isn't quite right. This _off() call can potentially try to disable clocks that have never been enabled (by the clock fwk) resulting in noisy warnings. I'll send a v2 which always calls _on() and then optionall calls _off(). That will ensure that the drivers notion of the clock state also matches the HW state. Kevin
diff --git a/drivers/soc/amlogic/meson-ee-pwrc.c b/drivers/soc/amlogic/meson-ee-pwrc.c index dcce8e694a07..2cb5341aedfa 100644 --- a/drivers/soc/amlogic/meson-ee-pwrc.c +++ b/drivers/soc/amlogic/meson-ee-pwrc.c @@ -323,6 +323,8 @@ static int meson_ee_pwrc_init_domain(struct platform_device *pdev, struct meson_ee_pwrc *pwrc, struct meson_ee_pwrc_domain *dom) { + bool is_off; + dom->pwrc = pwrc; dom->num_rstc = dom->desc.reset_names_count; dom->num_clks = dom->desc.clk_names_count; @@ -356,27 +358,13 @@ static int meson_ee_pwrc_init_domain(struct platform_device *pdev, dom->base.power_on = meson_ee_pwrc_on; dom->base.power_off = meson_ee_pwrc_off; - /* - * TOFIX: This is a special case for the VPU power domain, which can - * be enabled previously by the bootloader. In this case the VPU - * pipeline may be functional but no driver maybe never attach - * to this power domain, and if the domain is disabled it could - * cause system errors. This is why the pm_domain_always_on_gov - * is used here. - * For the same reason, the clocks should be enabled in case - * we need to power the domain off, otherwise the internal clocks - * prepare/enable counters won't be in sync. - */ - if (dom->num_clks && dom->desc.is_off && !dom->desc.is_off(dom)) { - int ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks); - if (ret) - return ret; - - pm_genpd_init(&dom->base, &pm_domain_always_on_gov, false); - } else - pm_genpd_init(&dom->base, NULL, - (dom->desc.is_off ? - dom->desc.is_off(dom) : true)); + /* Ensure that driver state matches HW state */ + is_off = dom->desc.is_off ? dom->desc.is_off(dom) : true; + if (is_off) + meson_ee_pwrc_off(&dom->base); + else + meson_ee_pwrc_on(&dom->base); + pm_genpd_init(&dom->base, NULL, is_off); return 0; }
During init, ensure that the driver on/off state as well as clock state matches the hardware state by calling drivers on/off functions based on whether the HW state is on/off. Signed-off-by: Kevin Hilman <khilman@baylibre.com> --- drivers/soc/amlogic/meson-ee-pwrc.c | 30 +++++++++-------------------- 1 file changed, 9 insertions(+), 21 deletions(-)