@@ -447,6 +447,11 @@ properties:
- const: rockchip,r88
- const: rockchip,rk3368
+ - description: Rockchip RK3308 Evaluation board
+ items:
+ - const: rockchip,rk3308-evb
+ - const: rockchip,rk3308
+
- description: Rockchip RK3228 Evaluation board
items:
- const: rockchip,rk3228-evb
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
new file mode 100644
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3308.dtsi"
+
+/ {
+ model = "Rockchip RK3308 EVB";
+ compatible = "rockchip,rk3308-evb", "rockchip,rk3308";
+
+ chosen {
+ stdout-path = "serial4:1500000n8";
+ };
+
+ adc-keys0 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ poll-interval = <100>;
+ keyup-threshold-microvolt = <1800000>;
+
+ func-key {
+ linux,code = <KEY_FN>;
+ label = "function";
+ press-threshold-microvolt = <18000>;
+ };
+ };
+
+ adc-keys1 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ poll-interval = <100>;
+ keyup-threshold-microvolt = <1800000>;
+
+ esc-key {
+ linux,code = <KEY_MICMUTE>;
+ label = "micmute";
+ press-threshold-microvolt = <1130000>;
+ };
+
+ home-key {
+ linux,code = <KEY_MODE>;
+ label = "mode";
+ press-threshold-microvolt = <901000>;
+ };
+
+ menu-key {
+ linux,code = <KEY_PLAY>;
+ label = "play";
+ press-threshold-microvolt = <624000>;
+ };
+
+ vol-down-key {
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "volume down";
+ press-threshold-microvolt = <300000>;
+ };
+
+ vol-up-key {
+ linux,code = <KEY_VOLUMEUP>;
+ label = "volume up";
+ press-threshold-microvolt = <18000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key>;
+
+ power {
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "GPIO Key Power";
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ vdd_log: vdd_core: vdd-core {
+ compatible = "pwm-regulator";
+ pwms = <&pwm0 0 5000 1>;
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <827000>;
+ regulator-max-microvolt = <1340000>;
+ regulator-init-microvolt = <1015000>;
+ regulator-early-min-microvolt = <1015000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-settling-time-up-us = <250>;
+ status = "okay";
+ };
+
+ vdd_1v0: vdd-1v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vccio_sdio: vcc_1v8: vcc-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_ddr: vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ vcc_io: vcc-io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_io";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vccio_flash: vccio-flash {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_flash";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vbus_host: vbus-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_drv>;
+ regulator-name = "vbus_host";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_core>;
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_32k>;
+
+ buttons {
+ pwr_key: pwr-key {
+ rockchip,pins = <0 RK_PA6 0 &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ usb_drv: usb-drv {
+ rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PA2 0 &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+
+ pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_xfer &uart4_cts>;
+ status = "okay";
+};
This board use uart4 as debug port and arm core voltage is modulated by pwm. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> --- .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 206 ++++++++++++++++++ 3 files changed, 212 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3308-evb.dts