Message ID | 20191018154201.1276638-39-arnd@arndb.de (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | ARM: pxa: towards multiplatform support | expand |
Hi Arnd, On Fri, Oct 18, 2019 at 05:41:54PM +0200, Arnd Bergmann wrote: > We have three power supplies that need similar initialization. > As a preparation for the gpio lookup table conversion, split > out the initialization into a separate function. > > Cc: Sebastian Reichel <sre@kernel.org> > Cc: linux-pm@vger.kernel.org > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > --- Assuming, that the whole series goes through ARM: Reviewed-by: Sebastian Reichel <sre@kernel.org> Acked-by: Sebastian Reichel <sre@kernel.org> If the series doesn't make it into 5.5, I can also apply this cleanup patch. -- Sebastian > drivers/power/supply/tosa_battery.c | 50 ++++++++++++++--------------- > 1 file changed, 24 insertions(+), 26 deletions(-) > > diff --git a/drivers/power/supply/tosa_battery.c b/drivers/power/supply/tosa_battery.c > index 32cc31cd4761..b26b0eca33e1 100644 > --- a/drivers/power/supply/tosa_battery.c > +++ b/drivers/power/supply/tosa_battery.c > @@ -343,12 +343,24 @@ static int tosa_bat_resume(struct platform_device *dev) > #define tosa_bat_resume NULL > #endif > > +static int tosa_power_supply_register(struct device *dev, > + struct tosa_bat *bat, > + const struct power_supply_desc *desc) > +{ > + struct power_supply_config cfg = { > + .drv_data = bat, > + }; > + > + mutex_init(&bat->work_lock); > + bat->psy = power_supply_register(dev, desc, &cfg); > + > + return PTR_ERR_OR_ZERO(bat->psy); > +} > + > + > static int tosa_bat_probe(struct platform_device *dev) > { > int ret; > - struct power_supply_config main_psy_cfg = {}, > - jacket_psy_cfg = {}, > - bu_psy_cfg = {}; > > if (!machine_is_tosa()) > return -ENODEV; > @@ -357,36 +369,22 @@ static int tosa_bat_probe(struct platform_device *dev) > if (ret) > return ret; > > - mutex_init(&tosa_bat_main.work_lock); > - mutex_init(&tosa_bat_jacket.work_lock); > - > INIT_WORK(&bat_work, tosa_bat_work); > > - main_psy_cfg.drv_data = &tosa_bat_main; > - tosa_bat_main.psy = power_supply_register(&dev->dev, > - &tosa_bat_main_desc, > - &main_psy_cfg); > - if (IS_ERR(tosa_bat_main.psy)) { > - ret = PTR_ERR(tosa_bat_main.psy); > + ret = tosa_power_supply_register(&dev->dev, &tosa_bat_main, > + &tosa_bat_main_desc); > + if (ret) > goto err_psy_reg_main; > - } > > - jacket_psy_cfg.drv_data = &tosa_bat_jacket; > - tosa_bat_jacket.psy = power_supply_register(&dev->dev, > - &tosa_bat_jacket_desc, > - &jacket_psy_cfg); > - if (IS_ERR(tosa_bat_jacket.psy)) { > - ret = PTR_ERR(tosa_bat_jacket.psy); > + ret = tosa_power_supply_register(&dev->dev, &tosa_bat_jacket, > + &tosa_bat_jacket_desc); > + if (ret) > goto err_psy_reg_jacket; > - } > > - bu_psy_cfg.drv_data = &tosa_bat_bu; > - tosa_bat_bu.psy = power_supply_register(&dev->dev, &tosa_bat_bu_desc, > - &bu_psy_cfg); > - if (IS_ERR(tosa_bat_bu.psy)) { > - ret = PTR_ERR(tosa_bat_bu.psy); > + ret = tosa_power_supply_register(&dev->dev, &tosa_bat_bu, > + &tosa_bat_bu_desc); > + if (ret) > goto err_psy_reg_bu; > - } > > ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), > tosa_bat_gpio_isr, > -- > 2.20.0 >
Sebastian Reichel <sre@kernel.org> writes: > Hi Arnd, > > On Fri, Oct 18, 2019 at 05:41:54PM +0200, Arnd Bergmann wrote: >> We have three power supplies that need similar initialization. >> As a preparation for the gpio lookup table conversion, split >> out the initialization into a separate function. >> >> Cc: Sebastian Reichel <sre@kernel.org> >> Cc: linux-pm@vger.kernel.org >> Signed-off-by: Arnd Bergmann <arnd@arndb.de> >> --- > > Assuming, that the whole series goes through ARM: > > Reviewed-by: Sebastian Reichel <sre@kernel.org> > Acked-by: Sebastian Reichel <sre@kernel.org> > > If the series doesn't make it into 5.5, I can also apply > this cleanup patch. > > -- Sebastian Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cheers. -- Robert
Sebastian Reichel <sre@kernel.org> writes: > Hi Arnd, > > On Fri, Oct 18, 2019 at 05:41:54PM +0200, Arnd Bergmann wrote: >> We have three power supplies that need similar initialization. >> As a preparation for the gpio lookup table conversion, split >> out the initialization into a separate function. >> >> Cc: Sebastian Reichel <sre@kernel.org> >> Cc: linux-pm@vger.kernel.org >> Signed-off-by: Arnd Bergmann <arnd@arndb.de> >> --- > > Assuming, that the whole series goes through ARM: > > Reviewed-by: Sebastian Reichel <sre@kernel.org> > Acked-by: Sebastian Reichel <sre@kernel.org> > > If the series doesn't make it into 5.5, I can also apply > this cleanup patch. > > -- Sebastian Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cheers. -- Robert
diff --git a/drivers/power/supply/tosa_battery.c b/drivers/power/supply/tosa_battery.c index 32cc31cd4761..b26b0eca33e1 100644 --- a/drivers/power/supply/tosa_battery.c +++ b/drivers/power/supply/tosa_battery.c @@ -343,12 +343,24 @@ static int tosa_bat_resume(struct platform_device *dev) #define tosa_bat_resume NULL #endif +static int tosa_power_supply_register(struct device *dev, + struct tosa_bat *bat, + const struct power_supply_desc *desc) +{ + struct power_supply_config cfg = { + .drv_data = bat, + }; + + mutex_init(&bat->work_lock); + bat->psy = power_supply_register(dev, desc, &cfg); + + return PTR_ERR_OR_ZERO(bat->psy); +} + + static int tosa_bat_probe(struct platform_device *dev) { int ret; - struct power_supply_config main_psy_cfg = {}, - jacket_psy_cfg = {}, - bu_psy_cfg = {}; if (!machine_is_tosa()) return -ENODEV; @@ -357,36 +369,22 @@ static int tosa_bat_probe(struct platform_device *dev) if (ret) return ret; - mutex_init(&tosa_bat_main.work_lock); - mutex_init(&tosa_bat_jacket.work_lock); - INIT_WORK(&bat_work, tosa_bat_work); - main_psy_cfg.drv_data = &tosa_bat_main; - tosa_bat_main.psy = power_supply_register(&dev->dev, - &tosa_bat_main_desc, - &main_psy_cfg); - if (IS_ERR(tosa_bat_main.psy)) { - ret = PTR_ERR(tosa_bat_main.psy); + ret = tosa_power_supply_register(&dev->dev, &tosa_bat_main, + &tosa_bat_main_desc); + if (ret) goto err_psy_reg_main; - } - jacket_psy_cfg.drv_data = &tosa_bat_jacket; - tosa_bat_jacket.psy = power_supply_register(&dev->dev, - &tosa_bat_jacket_desc, - &jacket_psy_cfg); - if (IS_ERR(tosa_bat_jacket.psy)) { - ret = PTR_ERR(tosa_bat_jacket.psy); + ret = tosa_power_supply_register(&dev->dev, &tosa_bat_jacket, + &tosa_bat_jacket_desc); + if (ret) goto err_psy_reg_jacket; - } - bu_psy_cfg.drv_data = &tosa_bat_bu; - tosa_bat_bu.psy = power_supply_register(&dev->dev, &tosa_bat_bu_desc, - &bu_psy_cfg); - if (IS_ERR(tosa_bat_bu.psy)) { - ret = PTR_ERR(tosa_bat_bu.psy); + ret = tosa_power_supply_register(&dev->dev, &tosa_bat_bu, + &tosa_bat_bu_desc); + if (ret) goto err_psy_reg_bu; - } ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), tosa_bat_gpio_isr,
We have three power supplies that need similar initialization. As a preparation for the gpio lookup table conversion, split out the initialization into a separate function. Cc: Sebastian Reichel <sre@kernel.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- drivers/power/supply/tosa_battery.c | 50 ++++++++++++++--------------- 1 file changed, 24 insertions(+), 26 deletions(-)