@@ -282,7 +282,7 @@ static const struct irq_domain_ops qe_ic_host_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+/* Return an interrupt vector or 0 if no interrupt is pending. */
unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
{
int irq;
@@ -293,12 +293,12 @@ unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
if (irq == 0)
- return NO_IRQ;
+ return 0;
return irq_linear_revmap(qe_ic->irqhost, irq);
}
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+/* Return an interrupt vector or 0 if no interrupt is pending. */
unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
{
int irq;
@@ -309,7 +309,7 @@ unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
if (irq == 0)
- return NO_IRQ;
+ return 0;
return irq_linear_revmap(qe_ic->irqhost, irq);
}
@@ -320,7 +320,7 @@ static void qe_ic_cascade_low(struct irq_desc *desc)
unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
struct irq_chip *chip = irq_desc_get_chip(desc);
- if (cascade_irq != NO_IRQ)
+ if (cascade_irq != 0)
generic_handle_irq(cascade_irq);
if (chip->irq_eoi)
@@ -333,7 +333,7 @@ static void qe_ic_cascade_high(struct irq_desc *desc)
unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
struct irq_chip *chip = irq_desc_get_chip(desc);
- if (cascade_irq != NO_IRQ)
+ if (cascade_irq != 0)
generic_handle_irq(cascade_irq);
if (chip->irq_eoi)
@@ -347,10 +347,10 @@ static void qe_ic_cascade_muxed_mpic(struct irq_desc *desc)
struct irq_chip *chip = irq_desc_get_chip(desc);
cascade_irq = qe_ic_get_high_irq(qe_ic);
- if (cascade_irq == NO_IRQ)
+ if (cascade_irq == 0)
cascade_irq = qe_ic_get_low_irq(qe_ic);
- if (cascade_irq != NO_IRQ)
+ if (cascade_irq != 0)
generic_handle_irq(cascade_irq);
chip->irq_eoi(&desc->irq_data);
@@ -386,7 +386,7 @@ static void __init qe_ic_init(struct device_node *node, unsigned int flags)
qe_ic->virq_high = irq_of_parse_and_map(node, 0);
qe_ic->virq_low = irq_of_parse_and_map(node, 1);
- if (qe_ic->virq_low == NO_IRQ) {
+ if (!qe_ic->virq_low) {
printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
kfree(qe_ic);
return;
@@ -423,8 +423,7 @@ static void __init qe_ic_init(struct device_node *node, unsigned int flags)
irq_set_handler_data(qe_ic->virq_low, qe_ic);
irq_set_chained_handler(qe_ic->virq_low, low_handler);
- if (qe_ic->virq_high != NO_IRQ &&
- qe_ic->virq_high != qe_ic->virq_low) {
+ if (qe_ic->virq_high && qe_ic->virq_high != qe_ic->virq_low) {
irq_set_handler_data(qe_ic->virq_high, qe_ic);
irq_set_chained_handler(qe_ic->virq_high, high_handler);
}
This driver is currently PPC-only, and on powerpc, NO_IRQ is 0, so this doesn't change functionality. However, not every architecture defines NO_IRQ, and some define it as -1, so the detection of a failed irq_of_parse_and_map() (which returns 0 on failure) would be wrong on those. So to prepare for allowing this driver to build on other architectures, drop all references to NO_IRQ. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> --- drivers/soc/fsl/qe/qe_ic.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-)