diff mbox series

[2/2] reset: brcmstb: Remove resource checks

Message ID 20191104181502.15679-3-f.fainelli@gmail.com (mailing list archive)
State Mainlined
Commit ce89d8d3a70fa530e16f0b0f8994385a214cd0c0
Headers show
Series Couple of reset-brcmstb fixes | expand

Commit Message

Florian Fainelli Nov. 4, 2019, 6:15 p.m. UTC 
The use of IS_ALIGNED() is incorrect, the typical resource we pass looks
like this: start: 0x8404318, size: 0x30. When using IS_ALIGNED() we will
get the following 0x8404318 & (0x18 - 1) = 0x10 which is definitively
not equal to 0, same goes with the size. These two checks would make the
driver fail probing.

Remove the resource checks, since there should be no constraint on the
base addresse or size.

Fixes: 77750bc089e4 ("reset: Add Broadcom STB SW_INIT reset controller driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/reset/reset-brcmstb.c | 6 ------
 1 file changed, 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/reset/reset-brcmstb.c b/drivers/reset/reset-brcmstb.c
index a608f445dad6..f213264c8567 100644
--- a/drivers/reset/reset-brcmstb.c
+++ b/drivers/reset/reset-brcmstb.c
@@ -91,12 +91,6 @@  static int brcmstb_reset_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!IS_ALIGNED(res->start, SW_INIT_BANK_SIZE) ||
-	    !IS_ALIGNED(resource_size(res), SW_INIT_BANK_SIZE)) {
-		dev_err(kdev, "incorrect register range\n");
-		return -EINVAL;
-	}
-
 	priv->base = devm_ioremap_resource(kdev, res);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);