diff mbox series

[v2,03/10] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only

Message ID 20191104204853.4355-4-bparrot@ti.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: dra7: add cal nodes | expand

Commit Message

Benoit Parrot Nov. 4, 2019, 8:48 p.m. UTC 
Both CAL and VIP rely on this clock domain. But CAL DPHY require
LVDSRX_96M_GFCLK to be active. When this domain is set to HWSUP the
LVDSRX_96M_GFCLK is on;y active when VIP1 clock is also active.  If only
CAL on DRA72x (which uses the VIP2 clkctrl) probes the CAM domain is
enabled but the LVDSRX_96M_GFCLK is left gated. Since LVDSRX_96M_GFCLK
is sourcing the input clock to the DPHY then actual frame capture cannot
start as the phy are inactive.

So we either have to also enabled VIP1 even if we don't intend on using
it or we need to set the CAM domain to use SWSUP only.

This patch implements the latter.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c
index 3068802824b7..27835c4d1aa9 100644
--- a/arch/arm/mach-omap2/clockdomains7xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c
@@ -606,7 +606,7 @@  static struct clockdomain cam_7xx_clkdm = {
 	.dep_bit	  = DRA7XX_CAM_STATDEP_SHIFT,
 	.wkdep_srcs	  = cam_wkup_sleep_deps,
 	.sleepdep_srcs	  = cam_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain l4per_7xx_clkdm = {