mbox series

[GIT,PULL,4/7] i.MX device tree changes for 5.5

Message ID 20191105150315.15477-4-shawnguo@kernel.org (mailing list archive)
State Mainlined
Commit 405b7b271c8bbcd72bab9909523d2c38c8c040e9
Headers show
Series [GIT,PULL,1/7] i.MX drivers update for 5.5 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.5

Message

Shawn Guo Nov. 5, 2019, 3:03 p.m. UTC
The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:

  Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.5

for you to fetch changes up to cc55c85d257e5d8435592643f4aeee683a8fa46f:

  ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation (2019-11-04 22:34:10 +0800)

----------------------------------------------------------------
i.MX device tree changes for 5.5:
 - New board support: Netronix E60K02 and Kobo Clara HD, Kontron N6311
   and N6411, OPOS6UL and OPOS6ULDev.
 - Correct speed grading fuse settings and add opp-suspend property for
   i.MX7D device tree.
 - Move usdhc clocks assignment from SoC to board level DTS for imx7ulp,
   and use APLL_PFD1 as usdhc's clock source on imx7ulp-evk board.
 - Add missing cooling device properties for CPUs for i.MX6/7 SoCs.
 - Add sensor GPIO regulator and assign power supplies for magnetometer
   for imx6ul-14x14-evk board.
 - Replace "simple-bus" with "simple-mfd" for ANATOP device for i.MX6/7
   SoCs.
 - Fix DTC W=1 warnings by not using simple-audio-card,dai-link on
   imx6qdl-gw551x and imx6q-gw54xx board.
 - Move to use DRM bindings for the Seiko 43WVF1G panel on imx53-qsb.
 - A series from Frieder Schrempf to support more i.MX6UL/ULL-based SoMs
   and boards from Kontron Electronics GmbH.
 - A few patches from Michal Vokáč to enable more devices support on
   imx6dl-yapp4 board.
 - A patch series from Philippe Schenker to improve i.MX6/7 Apalis and
   Colibri board support.
 - A patch series from Sébastien Szymanski to update i.MX6 APF6/APF6Dev
   device tree with more devices added and adopting DRM bindings for
   display.
 - Random improvements, clean-up and device additions on various boards.

----------------------------------------------------------------
Anatolij Gustschin (1):
      ARM: dts: imx6qdl-wandboard: add ethernet PHY description

Andreas Kemnade (2):
      ARM: dts: add Netronix E60K02 board common file
      ARM: dts: imx: add devicetree for Kobo Clara HD

Andrey Smirnov (3):
      ARM: dts: vf610-zii-scu4-aib: Drop "rs485-rts-delay" property
      ARM: dts: imx6qdl-zii-rdu2: Fix accelerometer interrupt-names
      ARM: dts: imx6qdl-zii-rdu2: Specify supplies for accelerometer

Anson Huang (12):
      ARM: dts: imx7ulp: Add wdog1 node
      ARM: dts: imx7d: Correct speed grading fuse settings
      ARM: dts: imx7d: Add opp-suspend property
      ARM: dts: imx7ulp: Move usdhc clocks assignment to board DT
      ARM: dts: imx6q: Add missing cooling device properties for CPUs
      ARM: dts: imx6dl: Add missing cooling device properties for CPUs
      ARM: dts: imx7d: Add missing cooling device properties for CPUs
      ARM: dts: imx6ul: Disable gpt2 by default
      ARM: dts: imx6ul-14x14-evk: Add sensors' GPIO regulator
      ARM: dts: imx6ul-14x14-evk: Fix the magnetometer node name
      ARM: dts: imx6ul-14x14-evk: Assign power supplies for magnetometer
      ARM: dts: imx7ulp-evk: Use APLL_PFD1 as usdhc's clock source

Fabio Estevam (6):
      ARM: dts: imx: Replace "simple-bus" with "simple-mfd" for anatop
      ARM: dts: imx6ul-phytec-phycore-som: Add missing unit name
      ARM: dts: imx6qdl-gw551x: Do not use 'simple-audio-card,dai-link'
      ARM: dts: vf610-zii-scu4-aib: Remove internal debug network interfaces
      ARM: dts: imx6q-gw54xx: Do not use 'simple-audio-card,dai-link'
      ARM: dts: imx53-qsb: Use DRM bindings for the Seiko 43WVF1G panel

Fancy Fang (1):
      ARM: dts: imx7ulp: remove mipi pll clock node

Frieder Schrempf (8):
      ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file
      ARM: dts: Add support for two more Kontron SoMs N6311 and N6411
      ARM: dts: imx6ul-kontron-n6310-s: Disable the snvs-poweroff driver
      ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file
      ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and 'N6411 S'
      ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path'
      ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes
      ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation

Geert Uytterhoeven (1):
      ARM: dts: imx53: Spelling s/configration/configuration/

Gilles DOFFE (1):
      ARM: dts: imx6qdl-rex: add gpio expander pca9535

Krzysztof Kozlowski (1):
      ARM: dts: imx: Rename "iram" node to "sram"

Lukasz Majewski (1):
      ARM: dts: Disable DMA support on the BK4 vf610 device's fsl_lpuart

Marcel Ziswiler (1):
      ARM: dts: vf-colibri: fix typo in top-level module compatible

Marek Vasut (1):
      ARM: dts: imx6q-dhcom: Enable CAN in board DTS

Markus Kueffner (1):
      ARM: dts: imx6qdl-udoo: Add Pincfgs for OTG

Max Krummenacher (2):
      ARM: dts: imx6ull-colibri: reduce v_batt current in power off
      ARM: dts: imx6ull: improve can templates

Michal Vokáč (3):
      ARM: dts: imx6dl-yapp4: Enable the MPR121 touchkey controller on Hydra
      ARM: dts: imx6dl-yapp4: Enable UART2
      ARM: dts: imx6dl-yapp4: Enable the I2C3 bus on all board variants

Peter Chen (1):
      ARM: dts: imx6ul-14x14-evk.dtsi: configure USBOTG1 ID pinctrl

Philippe Schenker (10):
      ARM: dts: imx7-colibri: Add touch controllers
      ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc
      ARM: dts: imx6qdl-apalis: Add sleep state to can interfaces
      ARM: dts: imx6-apalis: Add touchscreens used on Toradex eval boards
      ARM: dts: imx6-colibri: Add missing pinmuxing to Toradex eval board
      ARM: dts: imx6ull-colibri: Add sleep mode to fec
      ARM: dts: imx6ull-colibri: Add watchdog
      ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri
      ARM: dts: imx*(colibri|apalis): add missing recovery modes to i2c
      ARM: dts: vf-colibri: add recovery mode to i2c

Stefan Agner (2):
      ARM: dts: imx7-colibri: add GPIO wakeup key
      ARM: dts: imx7-colibri: fix 1.8V/UHS support

Sébastien Szymanski (10):
      ARM: dts: opos6ul/opos6uldev: rework device tree to support i.MX6ULL
      ARM: dts: imx6qdl-{apf6, apf6dev}: switch boards to SPDX identifier
      ARM: dts: imx6qdl-{apf6, apf6dev}: remove container node around pinctrl nodes
      ARM: dts: imx6qdl-apf6: add phy to fec
      ARM: dts: imx6qdl-apf6: add flow control to uart2
      ARM: dts: imx6qdl-apf6: fix WiFi
      ARM: dts: imx6qdl-apf6dev: add RTC support
      ARM: dts: imx6qdl-apf6dev: rename usb-h1-vbus regulator to 5V
      ARM: dts: imx6qdl-apf6dev: add backlight support
      ARM: dts: imx6qdl-apf6dev: use DRM bindings

 arch/arm/boot/dts/Makefile                         |   4 +-
 arch/arm/boot/dts/e60k02.dtsi                      | 306 +++++++++++++++
 arch/arm/boot/dts/imx27.dtsi                       |   2 +-
 arch/arm/boot/dts/imx31.dtsi                       |   2 +-
 arch/arm/boot/dts/imx51.dtsi                       |   2 +-
 arch/arm/boot/dts/imx53-qsb-common.dtsi            |  44 ++-
 arch/arm/boot/dts/imx53-usbarmory.dts              |   2 +-
 arch/arm/boot/dts/imx6dl-apf6dev.dts               |  49 +--
 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts       |  39 ++
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi         |  28 +-
 arch/arm/boot/dts/imx6dl-yapp4-hydra.dts           |   8 +-
 arch/arm/boot/dts/imx6dl.dtsi                      |   1 +
 arch/arm/boot/dts/imx6q-apalis-eval.dts            |  13 +
 arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts      |  13 +
 arch/arm/boot/dts/imx6q-apalis-ixora.dts           |  13 +
 arch/arm/boot/dts/imx6q-apf6dev.dts                |  49 +--
 arch/arm/boot/dts/imx6q-dhcom-pdk2.dts             |   8 +
 arch/arm/boot/dts/imx6q-dhcom-som.dtsi             |   2 -
 arch/arm/boot/dts/imx6q-gw54xx.dts                 |  19 +-
 arch/arm/boot/dts/imx6q.dtsi                       |   3 +
 arch/arm/boot/dts/imx6qdl-apalis.dtsi              |  57 ++-
 arch/arm/boot/dts/imx6qdl-apf6.dtsi                | 200 +++++-----
 arch/arm/boot/dts/imx6qdl-apf6dev.dtsi             | 424 ++++++++++-----------
 arch/arm/boot/dts/imx6qdl-colibri.dtsi             |  35 +-
 arch/arm/boot/dts/imx6qdl-gw551x.dtsi              |  19 +-
 arch/arm/boot/dts/imx6qdl-rex.dtsi                 |  19 +
 arch/arm/boot/dts/imx6qdl-udoo.dtsi                |  14 +
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi           |  10 +
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi            |   7 +-
 arch/arm/boot/dts/imx6sl.dtsi                      |   2 +-
 arch/arm/boot/dts/imx6sll-kobo-clarahd.dts         | 324 ++++++++++++++++
 arch/arm/boot/dts/imx6sll.dtsi                     |   2 +-
 arch/arm/boot/dts/imx6sx.dtsi                      |   2 +-
 arch/arm/boot/dts/imx6ul-14x14-evk.dtsi            |  28 +-
 arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi      | 148 +++++++
 arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi   | 338 ++++++++++++++++
 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts       | 405 +-------------------
 arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi    |  95 +----
 arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts       |  16 +
 arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi    |  40 ++
 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi      | 418 ++++++++++++++++++++
 .../boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi  | 109 ++++++
 arch/arm/boot/dts/imx6ul-opos6ul.dtsi              | 195 +---------
 arch/arm/boot/dts/imx6ul-opos6uldev.dts            | 382 +------------------
 arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi   |   2 +-
 arch/arm/boot/dts/imx6ul.dtsi                      |   3 +-
 arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi     |  14 +
 arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi     |   2 +-
 arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi        |   2 +-
 arch/arm/boot/dts/imx6ull-colibri.dtsi             |  64 +++-
 arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts      |  16 +
 arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi   |  40 ++
 arch/arm/boot/dts/imx6ull-opos6ul.dtsi             |   6 +
 arch/arm/boot/dts/imx6ull-opos6uldev.dts           |  42 ++
 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi        |  38 ++
 arch/arm/boot/dts/imx7-colibri.dtsi                |  30 +-
 arch/arm/boot/dts/imx7d.dtsi                       |   6 +-
 arch/arm/boot/dts/imx7s.dtsi                       |   2 +-
 arch/arm/boot/dts/imx7ulp-evk.dts                  |   2 +
 arch/arm/boot/dts/imx7ulp.dtsi                     |  31 +-
 arch/arm/boot/dts/vf-colibri.dtsi                  |  12 +-
 arch/arm/boot/dts/vf500-colibri.dtsi               |   2 +-
 arch/arm/boot/dts/vf610-bk4.dts                    |   4 +
 arch/arm/boot/dts/vf610-zii-scu4-aib.dts           |  12 -
 64 files changed, 2623 insertions(+), 1603 deletions(-)
 create mode 100644 arch/arm/boot/dts/e60k02.dtsi
 create mode 100644 arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
 create mode 100644 arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ull-opos6ul.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ull-opos6uldev.dts