| Message ID | 20191112142753.22976-10-bparrot@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: dra7: add cal nodes | expand |
* Benoit Parrot <bparrot@ti.com> [191112 14:25]: > Add CAL dtsi node for AM654 device. Including proper power-domains and > clock properties. > > Signed-off-by: Benoit Parrot <bparrot@ti.com> > --- > arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi > index 799c75fa7981..4c65ed445e8b 100644 > --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi > @@ -516,4 +516,27 @@ > dma-coherent; > interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; > }; > + > + cal: cal@6f03000 { > + compatible = "ti,am654-cal"; > + reg = <0x0 0x06f03000 0x0 0x400>, > + <0x0 0x06f03800 0x0 0x40>; > + reg-names = "cal_top", > + "cal_rx_core0"; > + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; > + ti,camerrx-control = <&scm_conf 0x40c0>; > + clock-names = "fck"; > + clocks = <&k3_clks 2 0>; > + power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + csi2_0: port@0 { > + reg = <0>; > + }; > + }; > + }; > }; Here too just drop the status = "disabled" line. For reference, see commit 12afc0cf8121 ("ARM: dts: Drop pointless status changing for am3 musb") in Linux next where we remove about 450 lines of pointless back and forth noise from status = "disabled" to various board specific files setting musb components back to status = "okay". Regards, Tony
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 799c75fa7981..4c65ed445e8b 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -516,4 +516,27 @@ dma-coherent; interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; }; + + cal: cal@6f03000 { + compatible = "ti,am654-cal"; + reg = <0x0 0x06f03000 0x0 0x400>, + <0x0 0x06f03800 0x0 0x40>; + reg-names = "cal_top", + "cal_rx_core0"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + ti,camerrx-control = <&scm_conf 0x40c0>; + clock-names = "fck"; + clocks = <&k3_clks 2 0>; + power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + }; + }; };
Add CAL dtsi node for AM654 device. Including proper power-domains and clock properties. Signed-off-by: Benoit Parrot <bparrot@ti.com> --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)