@@ -187,6 +187,12 @@
gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ clk_ov5640_fixed: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
};
&dra7_pmx_core {
@@ -269,6 +275,23 @@
line-name = "vin6_sel_s0";
};
};
+
+ ov5640@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2_phy0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
};
&uart1 {
@@ -580,3 +603,15 @@
&pcie1_rc {
status = "okay";
};
+
+&cal {
+ status = "okay";
+};
+
+&csi2_0 {
+ csi2_phy0: endpoint@0 {
+ remote-endpoint = <&csi2_cam0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+};
Add device nodes for CSI2 camera board OV5640. Add the CAL port nodes with the necessary linkage to the ov5640 nodes. Signed-off-by: Benoit Parrot <bparrot@ti.com> --- arch/arm/boot/dts/dra72-evm-common.dtsi | 35 +++++++++++++++++++++++++ 1 file changed, 35 insertions(+)