diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 3f869bd67082..1292ac3b6890 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -9,606 +9,9 @@
 #include "stm32mp157.dtsi"
 #include "stm32mp15-pinctrl.dtsi"
 #include "stm32mp15xxac-pinctrl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/st,stpmic1.h>
+#include "stm32mp15xx-dkx.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
 	compatible = "st,stm32mp157a-dk1", "st,stm32mp157";
-
-	aliases {
-		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xc0000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mcuram2: mcuram2@10000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10000000 0x40000>;
-			no-map;
-		};
-
-		vdev0vring0: vdev0vring0@10040000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10040000 0x1000>;
-			no-map;
-		};
-
-		vdev0vring1: vdev0vring1@10041000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10041000 0x1000>;
-			no-map;
-		};
-
-		vdev0buffer: vdev0buffer@10042000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10042000 0x4000>;
-			no-map;
-		};
-
-		mcuram: mcuram@30000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x30000000 0x40000>;
-			no-map;
-		};
-
-		retram: retram@38000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x38000000 0x10000>;
-			no-map;
-		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
-	};
-
-	led {
-		compatible = "gpio-leds";
-		blue {
-			label = "heartbeat";
-			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	sound {
-		compatible = "audio-graph-card";
-		label = "STM32MP1-DK";
-		routing =
-			"Playback" , "MCLK",
-			"Capture" , "MCLK",
-			"MICL" , "Mic Bias";
-		dais = <&sai2a_port &sai2b_port &i2s2_port>;
-		status = "okay";
-	};
-};
-
-&adc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
-	vdd-supply = <&vdd>;
-	vdda-supply = <&vdd>;
-	vref-supply = <&vrefbuf>;
-	status = "disabled";
-	adc1: adc@0 {
-		/*
-		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
-		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
-		 * 5 * (56 + 47kOhms) * 5pF => 2.5us.
-		 * Use arbitrary margin here (e.g. 5us).
-		 */
-		st,min-sample-time-nsecs = <5000>;
-		/* AIN connector, USB Type-C CC1 & CC2 */
-		st,adc-channels = <0 1 6 13 18 19>;
-		status = "okay";
-	};
-	adc2: adc@100 {
-		/* AIN connector, USB Type-C CC1 & CC2 */
-		st,adc-channels = <0 1 2 6 18 19>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
-	};
-};
-
-&cec {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cec_pins_b>;
-	pinctrl-1 = <&cec_pins_sleep_b>;
-	status = "okay";
-};
-
-&ethernet0 {
-	status = "okay";
-	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
-	pinctrl-names = "default", "sleep";
-	phy-mode = "rgmii-id";
-	max-speed = <1000>;
-	phy-handle = <&phy0>;
-
-	mdio0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-	};
-};
-
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c1_pins_a>;
-	pinctrl-1 = <&i2c1_pins_sleep_a>;
-	i2c-scl-rising-time-ns = <100>;
-	i2c-scl-falling-time-ns = <7>;
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-
-	hdmi-transmitter@39 {
-		compatible = "sil,sii9022";
-		reg = <0x39>;
-		iovcc-supply = <&v3v3_hdmi>;
-		cvcc12-supply = <&v1v2_hdmi>;
-		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-parent = <&gpiog>;
-		#sound-dai-cells = <0>;
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				sii9022_in: endpoint {
-					remote-endpoint = <&ltdc_ep0_out>;
-				};
-			};
-
-			port@3 {
-				reg = <3>;
-				sii9022_tx_endpoint: endpoint {
-					remote-endpoint = <&i2s2_endpoint>;
-				};
-			};
-		};
-	};
-
-	cs42l51: cs42l51@4a {
-		compatible = "cirrus,cs42l51";
-		reg = <0x4a>;
-		#sound-dai-cells = <0>;
-		VL-supply = <&v3v3>;
-		VD-supply = <&v1v8_audio>;
-		VA-supply = <&v1v8_audio>;
-		VAHP-supply = <&v1v8_audio>;
-		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
-		clocks = <&sai2a>;
-		clock-names = "MCLK";
-		status = "okay";
-
-		cs42l51_port: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cs42l51_tx_endpoint: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
-			};
-
-			cs42l51_rx_endpoint: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
-			};
-		};
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-	/* spare dmas for other usage */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-
-	pmic: stpmic@33 {
-		compatible = "st,stpmic1";
-		reg = <0x33>;
-		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		status = "okay";
-
-		regulators {
-			compatible = "st,stpmic1-regulators";
-			ldo1-supply = <&v3v3>;
-			ldo3-supply = <&vdd_ddr>;
-			ldo6-supply = <&v3v3>;
-			pwr_sw1-supply = <&bst_out>;
-			pwr_sw2-supply = <&bst_out>;
-
-			vddcore: buck1 {
-				regulator-name = "vddcore";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd_ddr: buck2 {
-				regulator-name = "vdd_ddr";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd: buck3 {
-				regulator-name = "vdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				st,mask-reset;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			v3v3: buck4 {
-				regulator-name = "v3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-				regulator-initial-mode = <0>;
-			};
-
-			v1v8_audio: ldo1 {
-				regulator-name = "v1v8_audio";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO1 0>;
-			};
-
-			v3v3_hdmi: ldo2 {
-				regulator-name = "v3v3_hdmi";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO2 0>;
-			};
-
-			vtt_ddr: ldo3 {
-				regulator-name = "vtt_ddr";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <750000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			vdd_usb: ldo4 {
-				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				interrupts = <IT_CURLIM_LDO4 0>;
-			};
-
-			vdda: ldo5 {
-				regulator-name = "vdda";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
-				interrupts = <IT_CURLIM_LDO5 0>;
-				regulator-boot-on;
-			};
-
-			v1v2_hdmi: ldo6 {
-				regulator-name = "v1v2_hdmi";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO6 0>;
-			};
-
-			vref_ddr: vref_ddr {
-				regulator-name = "vref_ddr";
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			 bst_out: boost {
-				regulator-name = "bst_out";
-				interrupts = <IT_OCP_BOOST 0>;
-			 };
-
-			vbus_otg: pwr_sw1 {
-				regulator-name = "vbus_otg";
-				interrupts = <IT_OCP_OTG 0>;
-			 };
-
-			 vbus_sw: pwr_sw2 {
-				regulator-name = "vbus_sw";
-				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge = <1>;
-			 };
-		};
-
-		onkey {
-			compatible = "st,stpmic1-onkey";
-			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
-			interrupt-names = "onkey-falling", "onkey-rising";
-			power-off-time-sec = <10>;
-			status = "okay";
-		};
-
-		watchdog {
-			compatible = "st,stpmic1-wdt";
-			status = "disabled";
-		};
-	};
-};
-
-&i2s2 {
-	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
-	clock-names = "pclk", "i2sclk", "x8k", "x11k";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2s2_pins_a>;
-	pinctrl-1 = <&i2s2_pins_sleep_a>;
-	status = "okay";
-
-	i2s2_port: port {
-		i2s2_endpoint: endpoint {
-			remote-endpoint = <&sii9022_tx_endpoint>;
-			format = "i2s";
-			mclk-fs = <256>;
-		};
-	};
-};
-
-&ipcc {
-	status = "okay";
-};
-
-&iwdg2 {
-	timeout-sec = <32>;
-	status = "okay";
-};
-
-&ltdc {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&ltdc_pins_a>;
-	pinctrl-1 = <&ltdc_pins_sleep_a>;
-	status = "okay";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&sii9022_in>;
-		};
-	};
-};
-
-&m4_rproc {
-	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
-			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
-	interrupt-parent = <&exti>;
-	interrupts = <68 1>;
-	status = "okay";
-};
-
-&pwr_regulators {
-	vdd-supply = <&vdd>;
-	vdd_3v3_usbfs-supply = <&vdd_usb>;
-};
-
-&rng1 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sai2 {
-	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
-	clock-names = "pclk", "x8k", "x11k";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
-	pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
-	status = "okay";
-
-	sai2a: audio-controller@4400b004 {
-		#clock-cells = <0>;
-		dma-names = "tx";
-		clocks = <&rcc SAI2_K>;
-		clock-names = "sai_ck";
-		status = "okay";
-
-		sai2a_port: port {
-			sai2a_endpoint: endpoint {
-				remote-endpoint = <&cs42l51_tx_endpoint>;
-				format = "i2s";
-				mclk-fs = <256>;
-				dai-tdm-slot-num = <2>;
-				dai-tdm-slot-width = <32>;
-			};
-		};
-	};
-
-	sai2b: audio-controller@4400b024 {
-		dma-names = "rx";
-		st,sync = <&sai2a 2>;
-		clocks = <&rcc SAI2_K>, <&sai2a>;
-		clock-names = "sai_ck", "MCLK";
-		status = "okay";
-
-		sai2b_port: port {
-			sai2b_endpoint: endpoint {
-				remote-endpoint = <&cs42l51_rx_endpoint>;
-				format = "i2s";
-				mclk-fs = <256>;
-				dai-tdm-slot-num = <2>;
-				dai-tdm-slot-width = <32>;
-			};
-		};
-	};
-};
-
-&sdmmc1 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
-	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&v3v3>;
-	status = "okay";
-};
-
-&sdmmc3 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc3_b4_pins_a>;
-	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
-	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
-	broken-cd;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&v3v3>;
-	status = "disabled";
-};
-
-&timers1 {
-	/* spare dmas for other usage */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm1_pins_a>;
-		pinctrl-1 = <&pwm1_sleep_pins_a>;
-		pinctrl-names = "default", "sleep";
-		status = "okay";
-	};
-	timer@0 {
-		status = "okay";
-	};
-};
-
-&timers3 {
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm3_pins_a>;
-		pinctrl-1 = <&pwm3_sleep_pins_a>;
-		pinctrl-names = "default", "sleep";
-		status = "okay";
-	};
-	timer@2 {
-		status = "okay";
-	};
-};
-
-&timers4 {
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
-		pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
-		pinctrl-names = "default", "sleep";
-		status = "okay";
-	};
-	timer@3 {
-		status = "okay";
-	};
-};
-
-&timers5 {
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm5_pins_a>;
-		pinctrl-1 = <&pwm5_sleep_pins_a>;
-		pinctrl-names = "default", "sleep";
-		status = "okay";
-	};
-	timer@4 {
-		status = "okay";
-	};
-};
-
-&timers6 {
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	timer@5 {
-		status = "okay";
-	};
-};
-
-&timers12 {
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm12_pins_a>;
-		pinctrl-1 = <&pwm12_sleep_pins_a>;
-		pinctrl-names = "default", "sleep";
-		status = "okay";
-	};
-	timer@11 {
-		status = "okay";
-	};
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
-	status = "okay";
-};
-
-&vrefbuf {
-	regulator-min-microvolt = <2500000>;
-	regulator-max-microvolt = <2500000>;
-	vdda-supply = <&vdd>;
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index d26adcbeba33..f889692b16b9 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -6,7 +6,11 @@
 
 /dts-v1/;
 
-#include "stm32mp157a-dk1.dts"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
new file mode 100644
index 000000000000..28efbccc61ce
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@d4000000 {
+			reg = <0xd4000000 0x4000000>;
+			no-map;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+		blue {
+			label = "heartbeat";
+			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32MP1-DK";
+		routing =
+			"Playback" , "MCLK",
+			"Capture" , "MCLK",
+			"MICL" , "Mic Bias";
+		dais = <&sai2a_port &sai2b_port &i2s2_port>;
+		status = "okay";
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "disabled";
+	adc1: adc@0 {
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (56 + 47kOhms) * 5pF => 2.5us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 */
+		st,min-sample-time-nsecs = <5000>;
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 6 13 18 19>;
+		status = "okay";
+	};
+	adc2: adc@100 {
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 2 6 18 19>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cec_pins_b>;
+	pinctrl-1 = <&cec_pins_sleep_b>;
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	hdmi-transmitter@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		iovcc-supply = <&v3v3_hdmi>;
+		cvcc12-supply = <&v1v2_hdmi>;
+		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiog>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sii9022_in: endpoint {
+					remote-endpoint = <&ltdc_ep0_out>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				sii9022_tx_endpoint: endpoint {
+					remote-endpoint = <&i2s2_endpoint>;
+				};
+			};
+		};
+	};
+
+	cs42l51: cs42l51@4a {
+		compatible = "cirrus,cs42l51";
+		reg = <0x4a>;
+		#sound-dai-cells = <0>;
+		VL-supply = <&v3v3>;
+		VD-supply = <&v1v8_audio>;
+		VA-supply = <&v1v8_audio>;
+		VAHP-supply = <&v1v8_audio>;
+		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+		clocks = <&sai2a>;
+		clock-names = "MCLK";
+		status = "okay";
+
+		cs42l51_port: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cs42l51_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+
+			cs42l51_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			 bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			 };
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&i2s2 {
+	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "i2sclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2s2_pins_a>;
+	pinctrl-1 = <&i2s2_pins_sleep_a>;
+	status = "okay";
+
+	i2s2_port: port {
+		i2s2_endpoint: endpoint {
+			remote-endpoint = <&sii9022_tx_endpoint>;
+			format = "i2s";
+			mclk-fs = <256>;
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-1 = <&ltdc_pins_sleep_a>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
+	pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_tx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
+
+	sai2b: audio-controller@4400b024 {
+		dma-names = "rx";
+		st,sync = <&sai2a 2>;
+		clocks = <&rcc SAI2_K>, <&sai2a>;
+		clock-names = "sai_ck", "MCLK";
+		status = "okay";
+
+		sai2b_port: port {
+			sai2b_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_rx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "disabled";
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm1_pins_a>;
+		pinctrl-1 = <&pwm1_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm3_pins_a>;
+		pinctrl-1 = <&pwm3_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
+		pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&timers6 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	timer@5 {
+		status = "okay";
+	};
+};
+
+&timers12 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm12_pins_a>;
+		pinctrl-1 = <&pwm12_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@11 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
