| Message ID | 20191123201317.25861-4-michael@walle.cc (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ls1028a: dts fixes and new board support | expand |
Hi Michael, > -----Original Message----- > From: devicetree-owner@vger.kernel.org <devicetree-owner@vger.kernel.org> > On Behalf Of Michael Walle > Sent: Sunday, November 24, 2019 1:43 AM > To: linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org > Cc: Shawn Guo <shawnguo@kernel.org>; Leo Li <leoyang.li@nxp.com>; Rob > Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; > Michael Walle <michael@walle.cc> > Subject: [EXT] [PATCH 3/4] arm64: dts: ls1028a: add FlexSPI node There's already a patch[1] sent upstream and is under review. It includes dts(i) entries for LS1028. I will be sending the next version [1] https://patchwork.kernel.org/patch/11139365/ > > Caution: EXT Email > > Signed-off-by: Michael Walle <michael@walle.cc> > --- > arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > index 6730922c2d47..650b277ddd66 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > @@ -260,6 +260,19 @@ > status = "disabled"; > }; > > + fspi: spi@20c0000 { > + compatible = "nxp,lx2160a-fspi"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0 0x20c0000 0x0 0x10000>, > + <0x0 0x20000000 0x0 0x10000000>; > + reg-names = "fspi_base", "fspi_mmap"; > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>, <&clockgen 4 3>; > + clock-names = "fspi_en", "fspi"; > + status = "disabled"; > + }; > + > esdhc: mmc@2140000 { > compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; > reg = <0x0 0x2140000 0x0 0x10000>; > -- > 2.20.1 Regards Kuldeep
Hi Kuldeep, Am 2019-11-26 07:40, schrieb Kuldeep Singh: > Hi Michael, > >> -----Original Message----- >> From: devicetree-owner@vger.kernel.org >> <devicetree-owner@vger.kernel.org> >> On Behalf Of Michael Walle >> Sent: Sunday, November 24, 2019 1:43 AM >> To: linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; >> linux- >> kernel@vger.kernel.org >> Cc: Shawn Guo <shawnguo@kernel.org>; Leo Li <leoyang.li@nxp.com>; Rob >> Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; >> Michael Walle <michael@walle.cc> >> Subject: [EXT] [PATCH 3/4] arm64: dts: ls1028a: add FlexSPI node > > There's already a patch[1] sent upstream and is under review. > It includes dts(i) entries for LS1028. I will be sending the next > version I've seen that, but there wasn't any reply for almost two months now. But if you're sending your next version, this patch can be dropped from this series. -michael > > [1] https://patchwork.kernel.org/patch/11139365/ >> >> Caution: EXT Email >> >> Signed-off-by: Michael Walle <michael@walle.cc> >> --- >> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 13 +++++++++++++ >> 1 file changed, 13 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> index 6730922c2d47..650b277ddd66 100644 >> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> @@ -260,6 +260,19 @@ >> status = "disabled"; >> }; >> >> + fspi: spi@20c0000 { >> + compatible = "nxp,lx2160a-fspi"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x0 0x20c0000 0x0 0x10000>, >> + <0x0 0x20000000 0x0 0x10000000>; >> + reg-names = "fspi_base", "fspi_mmap"; >> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>, <&clockgen 4 3>; >> + clock-names = "fspi_en", "fspi"; >> + status = "disabled"; >> + }; >> + >> esdhc: mmc@2140000 { >> compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; >> reg = <0x0 0x2140000 0x0 0x10000>; >> -- >> 2.20.1 > > Regards > Kuldeep
Hi, > -----Original Message----- > From: Michael Walle <michael@walle.cc> > Sent: Tuesday, November 26, 2019 3:38 PM > To: Kuldeep Singh <kuldeep.singh@nxp.com> > Cc: linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; > linux-kernel@vger.kernel.org; Shawn Guo <shawnguo@kernel.org>; Leo Li > <leoyang.li@nxp.com>; Rob Herring <robh+dt@kernel.org>; Mark Rutland > <mark.rutland@arm.com> > Subject: Re: [EXT] [PATCH 3/4] arm64: dts: ls1028a: add FlexSPI node > > Caution: EXT Email > > Hi Kuldeep, > > Am 2019-11-26 07:40, schrieb Kuldeep Singh: > > Hi Michael, > > > >> -----Original Message----- > >> From: devicetree-owner@vger.kernel.org > >> <devicetree-owner@vger.kernel.org> > >> On Behalf Of Michael Walle > >> Sent: Sunday, November 24, 2019 1:43 AM > >> To: linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; > >> linux- > >> kernel@vger.kernel.org > >> Cc: Shawn Guo <shawnguo@kernel.org>; Leo Li <leoyang.li@nxp.com>; > Rob > >> Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; > >> Michael Walle <michael@walle.cc> > >> Subject: [EXT] [PATCH 3/4] arm64: dts: ls1028a: add FlexSPI node > > > > There's already a patch[1] sent upstream and is under review. > > It includes dts(i) entries for LS1028. I will be sending the next > > version > > I've seen that, but there wasn't any reply for almost two months now. > But > if you're sending your next version, this patch can be dropped from this > series. Okay. --Kuldeep > > -michael > > > > > [1] > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc > > > hwork.kernel.org%2Fpatch%2F11139365%2F&data=02%7C01%7Ckuld > eep.sing > > > h%40nxp.com%7C327363e5ba97483c9add08d77258875d%7C686ea1d3bc2 > b4c6fa92cd > > > 99c5c301635%7C0%7C0%7C637103596868168346&sdata=yDJ1ggrIuR > v1%2Br%2F > > 9Ez1uvv0EpFB8Mns5%2Ffn%2F7zG5InA%3D&reserved=0 > >> > >> Caution: EXT Email > >> > >> Signed-off-by: Michael Walle <michael@walle.cc> > >> --- > >> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 13 +++++++++++++ > >> 1 file changed, 13 insertions(+) > >> > >> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > >> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > >> index 6730922c2d47..650b277ddd66 100644 > >> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > >> @@ -260,6 +260,19 @@ > >> status = "disabled"; > >> }; > >> > >> + fspi: spi@20c0000 { > >> + compatible = "nxp,lx2160a-fspi"; > >> + #address-cells = <1>; > >> + #size-cells = <0>; > >> + reg = <0x0 0x20c0000 0x0 0x10000>, > >> + <0x0 0x20000000 0x0 0x10000000>; > >> + reg-names = "fspi_base", "fspi_mmap"; > >> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > >> + clocks = <&clockgen 4 3>, <&clockgen 4 3>; > >> + clock-names = "fspi_en", "fspi"; > >> + status = "disabled"; > >> + }; > >> + > >> esdhc: mmc@2140000 { > >> compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; > >> reg = <0x0 0x2140000 0x0 0x10000>; > >> -- > >> 2.20.1 > > > > Regards > > Kuldeep
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 6730922c2d47..650b277ddd66 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -260,6 +260,19 @@ status = "disabled"; }; + fspi: spi@20c0000 { + compatible = "nxp,lx2160a-fspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + status = "disabled"; + }; + esdhc: mmc@2140000 { compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>;
Signed-off-by: Michael Walle <michael@walle.cc> --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)