diff mbox series

[v6,6/7] arm64: dts: allwinner: sun50i-h6: Add thermal sensor and thermal zones

Message ID 20191127052935.1719897-7-anarsoul@gmail.com (mailing list archive)
State New, archived
Headers show
Series add thermal sensor driver for A64, A83T, H3, H5, H6, R40 | expand

Commit Message

Vasily Khoruzhick Nov. 27, 2019, 5:29 a.m. UTC 
From: Ondrej Jirman <megous@megous.com>

There are two sensors, one for CPU, one for GPU.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++
 1 file changed, 33 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 0d5ea19336a1..18288387762f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -11,6 +11,7 @@ 
 #include <dt-bindings/reset/sun50i-h6-ccu.h>
 #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -210,6 +211,12 @@ 
 		sid: efuse@3006000 {
 			compatible = "allwinner,sun50i-h6-sid";
 			reg = <0x03006000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x6>;
+			};
 		};
 
 		watchdog: watchdog@30090a0 {
@@ -792,5 +799,31 @@ 
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		ths: ths@5070400 {
+			compatible = "allwinner,sun50i-h6-ths";
+			reg = <0x05070400 0x100>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
 	};
 };